G2 Axle and Gear
Showing 673–720 of 1013 resultsSorted by popularity
-
-
-
-
-
-
Differential Covers
G2 Ford 9.75 Inch Ball Milled Aluminum Cover – 40-2012MB
- Rear Ford 9.75 inch aluminum differential cover
- Cast lightweight aluminum that helps dissipate heat
- Ball milled ribs, with heat treatment and shot peening
- Extra oil capacity with filler, fill level and drain plugs
SKU: G/240-2012MB -
Ring and Pinions
G2 GM 8.5 Inch 10 Bolt 4.56 Ratio Ring and Pinion – 2-2021-456
- G2 Axle and Gear 2-2021-456 ring and pinion set with a 4.56 gear ratio
- Fits GM 10 bolt axles at 8.5 inches and 8.6 inches
- Computer heat treated 8620 steel, double shot peened and double lapped
- Carrier requirement: 2.73 up carrier
- 10 year warranty
SKU: G/22-2021-456 -
-
Axle Truss
G2 Dana 30 Front Axle Top Truss – 68-2050-1
- Top truss for the Dana 30 front axle on 2007-2018 Jeep Wrangler JK
- Heavy-duty steel: 1/4 inch main components, 1/8 inch reinforcement plates
- Unpainted; welding required, including to the cast center section
- Fits 2-door and 4-door models; includes top truss only
SKU: G/268-2050-1 -
Ring and Pinion Installation Kits
G2 GM 14 Bolt 10.5 Inch 88 and Up Master Ring and Pinion Installation Kit – 35-2023A
Ring and Pinion Installation KitsG2 GM 14 Bolt 10.5 Inch 88 and Up Master Ring and Pinion Installation Kit – 35-2023A
- For 1988 and up GM 14 bolt 10.5 inch big bearing rear axles
- Includes a Timken pinion pilot bearing
- Timken pinion and carrier bearings with races
- Part number 35-2023A
SKU: G/235-2023A -
Ring and Pinions
G2 Toyota 10.5 Inch 4.88 Ratio Ring and Pinion – 2-2064-488
- G2 Axle and Gear 4.88 ratio ring and pinion for the Toyota 10.5 inch 12 bolt rear axle, part 2-2064-488
- Works with all ratio carriers
- Computer heat treated 8620 steel, double shot peened, double lapped
- 10 year warranty from G2
SKU: G/22-2064-488 -
-
-
-
Ring and Pinion Installation Kits
G2 Dana 44 Master Ring and Pinion Installation Kit – 35-2033
- Master ring and pinion installation kit for Dana 44 axles, part number 35-2033
- Includes Timken pinion and carrier bearings with races
- Pinion nut, pinion seal, crush sleeve, shims and ring gear bolts included
- Confirm vehicle fit before ordering
SKU: G/235-2033 -
Ring and Pinion Installation Kits
G2 Dana 35 Master Ring and Pinion Installation Kit – 35-2049
- Dana 35 rear and Dana 35 IFS standard rotation front axles
- Not for rear axles with the 30 spline upgrade kit (use 35-2049L)
- Timken pinion bearings and carrier bearings with races
- Part number 35-2049
SKU: G/235-2049 -
-
Differential Covers
G2 Ford SuperdutyDana 60 Front Ball Milled Aluminum Cover – 40-2034MBF
- Front Dana 60 axles on 2005 and newer Ford Super Duty trucks
- Lightweight cast aluminum with ball milled ribs
- Black powder coat, heat treated and shot peened
- Filler, fill level and drain plugs and a dipstick
SKU: G/240-2034MBF -
Dana 44 Complete Assemblies
G2 JK CORE 44 High Pinion Front Axle With 5.13 Ratio and 35 Spline ARB Air Locker Differential – C4JMFL513AP5
Dana 44 Complete AssembliesG2 JK CORE 44 High Pinion Front Axle With 5.13 Ratio and 35 Spline ARB Air Locker Differential – C4JMFL513AP5
- JK high pinion front axle with 5.13 ratio and ARB Air Locker
- New generation 8.8-inch JK 44 ring and pinion, 35 spline Placer axle shafts
- Built-in 3 degrees of extra caster for lifts of 6 inches and up
- G2 Axle and Gear part number C4JMFL513AP5, UPC 631410120479
SKU: G/2C4JMFL513AP5 -
Ring and Pinion Installation Kits
G2 Dana 44 JK Rubicon Front Master Ring and Pinion Installation Kit – 35-2051
Ring and Pinion Installation KitsG2 Dana 44 JK Rubicon Front Master Ring and Pinion Installation Kit – 35-2051
- Front master ring and pinion kit for the Dana 44 on Jeep JK Rubicon, part number 35-2051
- Includes Timken pinion bearings and carrier bearings with races
- Rubicon front axle only
- Fits Wrangler JK models from 2007 through 2018
SKU: G/235-2051 -
Axle Truss
G2 Rear Dana 44 Truss – 68-2052-1
- G2 rear Dana 44 axle truss, part 68-2052-1, for the Jeep JK
- Heavy-duty steel, 1/4 inch components and 1/8 inch plates
- Intended for JKs with at least some lift; check clearance on lower-lift vehicles
- Welding required; upper link mount sold separately
SKU: G/268-2052-1 -
Ring and Pinion Installation Kits
G2 Ford 9 Inch 3.06 Inch Bore Master Ring and Pinion Installation Kit – 35-2011
Ring and Pinion Installation KitsG2 Ford 9 Inch 3.06 Inch Bore Master Ring and Pinion Installation Kit – 35-2011
- Master kit with bearings for the Ford 9-inch, 3.06-inch bore axle, rear
- For use with 3.06-inch bore case
- Includes Timken pinion bearings and carrier bearings, shims, nut, seal and crush sleeve
- Gear marking compound, thread locking compound and silicone sealer
SKU: G/235-2011 -
Ring and Pinion Installation Kits
G2 Ford 7.5 Inch Master Ring and Pinion Installation Kit – 35-2014
Ring and Pinion Installation KitsG2 Ford 7.5 Inch Master Ring and Pinion Installation Kit – 35-2014
- Master kit with bearings for the Ford 7.5-inch axle, rear
- Pinion and carrier bearings with shims, nut, seal and crush sleeve
- Includes Timken pinion bearings and carrier bearings, shims, nut, seal and crush sleeve
- Gear marking compound, thread locking compound and silicone sealer
SKU: G/235-2014 -
Ring and Pinion Installation Kits
G2 Dana 30 JK With ARB Air Locker Master Ring and Pinion Installation Kit – 35-2050ARB
Ring and Pinion Installation KitsG2 Dana 30 JK With ARB Air Locker Master Ring and Pinion Installation Kit – 35-2050ARB
- Master kit with bearings for the Dana 30 (Jeep JK front, ARB Air Locker) axle, front
- For use in Jeep JK Dana 30 front with ARB Air Locker only
- Includes Timken pinion bearings, shims, nut, seal and crush sleeve
- Gear marking compound, thread locking compound and silicone sealer
SKU: G/235-2050ARB -
Ring and Pinion Installation Kits
G2 Dana 44 Big Bearing Master Ring and Pinion Installation Kit – 35-2033B
Ring and Pinion Installation KitsG2 Dana 44 Big Bearing Master Ring and Pinion Installation Kit – 35-2033B
- Front Dana 44 master ring and pinion kit with big bearings, part number 35-2033B
- Fits 1994–1996 Ford F-150 and Bronco front axles
- Includes Timken pinion and carrier bearings with races
- Also named: 1991–2001 Dodge 1500 front axles
SKU: G/235-2033B -
Ring and Pinion Installation Kits
G2 GM 12 Bolt Car Master Ring and Pinion Installation Kit – 35-2019
Ring and Pinion Installation KitsG2 GM 12 Bolt Car Master Ring and Pinion Installation Kit – 35-2019
- Master kit with bearings for the GM 12 bolt car, 8.875-inch axle, rear
- Pinion and carrier bearings with shims, nut, seal and crush sleeve
- Includes Timken pinion bearings and carrier bearings, shims, nut, seal and crush sleeve
- Gear marking compound, thread locking compound and silicone sealer
SKU: G/235-2019 -
Ring and Pinions
G2 Dana 30 XJ/YJ Front Reverse 4.10 Ratio Ring and Pinion – 2-2032-410R
- G2 Axle and Gear 4.10 ratio front reverse ring and pinion, part 2-2032-410R
- Fits the Jeep XJ Cherokee (1984-1999) and YJ Wrangler (1987-1995) front axle
- For use with 3.73 and up carriers
- Computer heat treated 8620 steel, double shot peened, double lapped
SKU: G/22-2032-410R -
Ring and Pinion Installation Kits
G2 GM 14 Bolt 10.5 Inch 73 To 87 Master Ring and Pinion Installation Kit – 35-2023
Ring and Pinion Installation KitsG2 GM 14 Bolt 10.5 Inch 73 To 87 Master Ring and Pinion Installation Kit – 35-2023
- Master kit with bearings for the GM 14 bolt 10.5-inch axle, rear
- For use in 1973-1987 small bearing rear axles
- Includes Timken pinion bearings and carrier bearings, shims, nut, seal and crush sleeve
- Gear marking compound, thread locking compound and silicone sealer
SKU: G/235-2023 -
-
-
Ring and Pinions
G2 GM 8.25 Inch IFS 4.88 Ratio Ring and Pinion – 2-2095-488
- G2 Axle and Gear 4.88 ratio ring and pinion for the GM 8.25 inch IFS front axle, part 2-2095-488
- Works with all ratio carriers
- Computer heat treated 8620 steel, double shot peened, double lapped
- 10 year warranty from G2
SKU: G/22-2095-488 -
-
Dana 44 Ring and Pinion
G2 Dana 44 Front Reverse 4.88 Ratio Ring and Pinion – 2-2033-488R
- G2 Dana 44 front reverse 4.88 ratio ring and pinion, part number 2-2033-488R
- For use with a 3.91 and up carrier
- Computer heat-treated 8620 steel, shot peened and double lapped
- 10-year warranty listed by G2
SKU: G/22-2033-488R -
Ring and Pinions
G2 Ford 7.5 Inch 4.10 Ratio Ring and Pinion – 2-2014-410
- G2 Axle and Gear 4.10 ratio ring and pinion for the Ford 7.5 inch rear axle, part 2-2014-410
- Works with all ratio carriers
- Computer heat treated 8620 steel, double shot peened, double lapped
- 10 year warranty from G2
SKU: G/22-2014-410 -
-
-
Ring and Pinions
G2 Toyota 8 Inch V6 4.88 Ratio Ring and Pinion – 2-2043-488
- G2 Axle and Gear 4.88 ratio ring and pinion for the Toyota 8 inch V6 rear axle, part 2-2043-488
- Works with all ratio carriers
- Computer heat treated 8620 steel, double shot peened, double lapped
- 10 year warranty from G2
SKU: G/22-2043-488 -
Ring and Pinions
G2 Ford 8.8 Inch 3.55 Ratio Ring and Pinion – 2-2013-355
- G2 Axle and Gear 3.55 ratio ring and pinion for the Ford 8.8 inch rear axle, part 2-2013-355
- Works with all ratio carriers
- Computer heat treated 8620 steel, double shot peened, double lapped
- 10 year warranty from G2
SKU: G/22-2013-355 -
Ring and Pinions
G2 Ford 7.5 Inch 4.56 Ratio Ring and Pinion – 2-2014-456
- G2 Axle and Gear 4.56 ratio ring and pinion for the Ford 7.5 inch rear axle, part 2-2014-456
- Works with all ratio carriers
- Computer heat treated 8620 steel, double shot peened, double lapped
- 10 year warranty from G2
SKU: G/22-2014-456 -
Ring and Pinions
G2 Ford 8.8 Inch IFS 4.10 Ratio Ring and Pinion – 2-2088-410
- G2 Axle and Gear 4.10 ratio ring and pinion for the Ford 8.8 inch front axle, part 2-2088-410
- For front axle use only
- Works with all ratio carriers
- Computer heat treated 8620 steel, double shot peened, double lapped
SKU: G/22-2088-410 -
Ring and Pinions
G2 Ford 9 Inch 5.43 Ratio Ring and Pinion – 2-2011-543
- G2 Axle and Gear 5.43 ratio ring and pinion for the Ford 9 inch rear axle, part 2-2011-543
- Works with all ratio carriers
- May require minor case clearancing
- Computer heat treated 8620 steel, double shot peened, double lapped
SKU: G/22-2011-543 -
-
Differential Covers
G2 Chrysler 9.25 Inch Ball Milled Aluminum Cover – 40-2028MB
- Rear cover for Chrysler 9.25 inch axles
- Cast lightweight aluminum body with a black powder coat
- Ball milled ribs and a heat treated, shot peened body
- Filler, fill level and drain plugs for service, plus a dipstick
SKU: G/240-2028MB


































