Select your vehicle

Fenders & Flares

Fenders and flares cover tire clearance, body protection and the look of a lifted or widely tired vehicle. This category includes bolt-on fender flares, tube fenders, inner fender liners, trim and the hardware that holds them on. Bushwacker, Rough Country, Smittybilt and Fab Fours are well represented. Browse the product pages for coverage, finish and part numbers, then compare the products below.

Bushwacker Pocket Style fender flares in black, set of four

Once tires grow past the stock bodywork, the fenders decide how much mud lands on your paint and how far the suspension can stuff before rubber meets sheet metal. These parts widen the wheel opening, cut it open for travel, or seal the wheel well from debris.

Molded flares from Bushwacker, Rough Country and Bestop keep the factory fender and add width, from a subtle OE look to deep pocket styles. Tube and steel fenders from Fab Fours, Fishbone, ADD and Smittybilt replace the outer panel and open up the arch. Inner fenders seal the engine bay side of the wheel well, and small retainers, clips and trim pieces repair what is already on the truck.

140Parts listed
6Part types
20Brands
0.75–7"Listed flare coverage
2"Typical pocket flare
Set of 4Common pack size

Shop fenders and flares by type

Popular fenders and flares

Coverage and fitment reference

Tire coverage figures as the makers list them. Coverage is how far the flare reaches past the stock body line, so measure how far your tread sticks out before choosing.

Listed coverage by style

StyleCoverage
Bushwacker Chevrolet rear flaresOE style0.75"
Bushwacker Max CoveragePocket2"
Rough Country Ram flaresPocket with rivets2"
Bestop Highrock 4x4 rearHighrock 4x4 flare6"
Smittybilt XRC setFlat fender flare7"

Inner fender choices

  • Vented front inner fenders let engine heat escape through the wheel well
  • Poison Spyder offers a front kit sized for coilover shocks
  • Fishbone Offroad aluminum inners come in black or raw finish
  • Fab Fours, DV8 Offroad and Artec Industries also list front or rear inners
  • ADD's JL rear Stealth Fighter fenders reuse the OEM inner liner

Before ordering

  • Front, rear or both: flares and fenders are often sold by axle
  • Pair or set of 4, and left or right for single pieces
  • Paintable or textured black finish
  • Bronco delete kits come in separate 2-door and 4-door versions
  • Lighting on armor fenders needs wiring to the turn signal circuit

Tube and steel fender options

Fab Fours Open Fender SystemSet of 4, matte black
ADD Stealth Fighter (JL rear)Tube and plate steel, pair
Smittybilt ApolloFront and rear, black powder coat
Fishbone Offroad GladiatorRear steel tube, textured black
DV8 Offroad armor fendersBuilt-in LED turn signals
Listed as no cutting or drillingApollo, Fishbone, ADD front

Repair and trim parts

  • Crown fender flare retainer brackets, sold by position (left front, center)
  • Crown fender flare braces and the JK fender flare hardware kit
  • Bushwacker replacement edge trim for its flares
  • Omix-ADA fender liner rivets and rocker molding clips
  • Putco stainless steel fender trim for full-size trucks

State rules on how much of the tread must be covered vary. Check yours before going to a narrow flare or a tube fender.

All Fenders & Flares 142 parts

Showing 1–12 of 142 resultsSorted by popularity

What this category covers

Larger tires stick out past stock bodywork, which throws rocks, mud and water at the paint and can be a problem under local fender coverage rules. Products here address that in several ways: molded flares that extend the stock fender, tube fenders that replace the factory metal, liners that protect the inner wheel well, and trim or retainers for repair and finishing.

Types of flares and fenders

  • Pocket or rivet style: a boxy, bolt-look design that widens the fender and often adds around 2 inches of coverage per side.
  • Extend-A-Fender style: an add-on flare that extends stock fender lines for more tire coverage.
  • OE style: a smoother shape that looks like a factory part.
  • Tube fenders: open, powder-coated steel designs that save weight and give extra clearance for flex and big tires.
  • Inner fenders and liners: protect the engine bay and body from debris, and vented versions help airflow.

Choosing the right one

Start with width and coverage. If you run wide wheels with low backspacing, the tires may extend farther than a standard flare covers. Decide whether you want a paintable finish to color-match the vehicle or a textured black finish that hides trail wear. Check position (front, rear or both) and whether the part is sold as a pair or set. Most listings note a direct-fit design for specific vehicles, so match your year, make, model and bed or body style before ordering.

Installation notes

Some flares attach with supplied hardware and need no cutting or drilling, while others require trimming the factory flare or drilling into the body. Read the maker's instructions first. Clean the surface, check for rust, and seal any drilled holes to prevent corrosion. Paintable flares need primer and paint before or after mounting, depending on the instructions. Tube fenders usually bolt into factory fender locations but may need stock fenders removed. If you are not comfortable cutting body panels, use a body shop.

Material choice affects durability and looks. Flares are commonly made from injection-molded plastic or similar compounds that flex and resist cracking when hit by brush, while steel and aluminum tube fenders resist impacts from rocks and can be repaired if bent. Textured finishes hide scratches better than glossy ones, and powder coat on steel gives lasting rust protection when the coating is intact. If a tube fender is scratched to bare metal on the trail, touch it up to slow corrosion.

Think about the other parts on the vehicle too. Wider flares can change how mud and water are thrown at the sides, and added coverage can affect clearance for mirrors, side steps or rock sliders on some models. Liners and inner fenders keep wiring, the battery and the air intake cleaner, which is useful for water crossings and dusty roads. Retainers, rivets and trim pieces in this category are useful for repairs on older flares, so match them to the style and part number of the set they belong to.

Regulations

Many states require tires to be covered by a fender or flare, and coverage rules vary. Check your state's regulations before picking a width. Confirm fitment against the manufacturer's specifications for your exact vehicle.

Popular Fenders & Flares brands

Fenders & Flares FAQ

What is the difference between fender flares and tube fenders?

Fender flares add molded plastic or similar material that extends the stock fender for more tire coverage. Tube fenders replace the factory metal fender with open steel tubing, which saves weight and allows more clearance for travel and larger tires.

Do I need to drill or cut my body to install flares?

It depends on the product. Many direct-fit flares bolt on with included hardware, while others need trimming or drilling. The product page and the maker's instructions will say which, so read them before you commit.

What does paintable mean for fender flares?

Paintable flares come with a primed or smooth surface so you can paint them to match your vehicle. They usually need proper prep and a paint system suited to the material. Black textured flares skip painting but have a different look.

How wide a flare do I need for larger tires?

Compare the width of your tire and wheel, including offset, against the stock fender coverage, then choose a flare that covers the tread. Coverage listed per flare, such as 2 inches, shows how much it adds. Check state coverage rules as well.