Select your vehicle

UTV Parts & Accessories

Parts and accessories for side-by-side UTVs, organized into tires and wheels, cages and armor, exterior and interior accessories, suspension and axles, and lighting. Brands such as Pro Armor, Assault Industries, Method Race Wheels and PRP Seats appear among the listings. Pick a subcategory to narrow by part type, and confirm fitment for your exact make, model and year before comparing the products below.

High Lifter Outlaw2 29.5x9.5R14 UTV mud tire

Side-by-sides run on their own parts: smaller wheels and bolt patterns, CVT drive belts, CV axles and tube cages. This section collects tires, armor, lighting, interior gear, radios and drivetrain parts for Polaris, Can-Am and other UTVs, so you can protect the machine and keep it running.

Tires and wheels are the largest group, followed by cages, bumpers-bumpers-tire-carriers-winch-mounts-2 and armor. Exterior parts include door inserts and graphics, grilles and body panels. Suspension and axles covers CV shafts and boot savers. Performance parts include drive belts, mounts and gauges. Interior, seats, audio and communications cover shifters, storage bags, extinguisher mounts, harnesses and intercom kits. Most listings name the exact model and year, so match them carefully.

399Parts listed
51Brands
11Part types
14"Rim on Outlaw2 29.5x9.5
25–26°Gates C12 belt angle
0–150 psiRacePak oil sensor range

Shop UTV parts by type

Popular UTV parts

UTV parts reference

Sizes and specs taken from listed products. UTV parts are model-specific, so use these numbers to compare and confirm, then check the product page against your machine's model and year.

Reading a UTV tire size

Example29.5x9.5R14 (High Lifter Outlaw2)
29.5Overall height in inches
9.5Section width in inches
RRadial construction
14Rim diameter in inches

Fitment examples from listings

TrakMotive POL-7042 CV axleSome 2014–2016 Polaris RZR XP 1000
High Lifter BELT-HLP221Polaris RZR 900 models
High Lifter BELT-HLP216Polaris Ranger, Sportsman, RZR, Ace
Assault shifter gate panel kitCan-Am Maverick X3
Energy Suspension navigation barPolaris RZR XP 900 and XP 1000
Pro Armor door graphics2018 RZR XP 1000, XP4 1000 and Turbo

Ride checks

  • Look over CV boots for tears or grease spray after every ride
  • Check the drive belt for glazing, cracks or missing cogs
  • Re-torque skid plate, bumper and cage clamp bolts after rough trails
  • Clean mud out of the clutch area and footwell drains
  • Test kill switch lanyard, harness latches and radio before heading out

Gates G Force C12 belt sizes

Outside circ.Top width
23C414042.625"1.25"
25C410842.256"1.246"
26C414042.57"1.261"
27C415942.887"1.281"
30C375038.625"1.313"
47C426643.831"1.47"
50C428944.066"1.499"

Other specs from listed parts

Assault steering quick release6-bolt hub pattern, chromoly
Axia modular cage clampSized for 1.625" tube
RacePak oil pressure kit0–150 psi sensor, 144" cable
TrakMotive CV axleSolid center shaft, neoprene boots

Measure before you order

  • Wheel bolt pattern, offset and center bore for your exact model
  • Outside diameter of the cage tube before buying clamps or mounts
  • Belt part number from the old belt or the owner's manual
  • Steering hub bolt count before a quick release or wheel
  • Two-seat or four-seat chassis for doors, graphics and inserts
  • Machine model year: mounting points can change between years

UTV parts are rarely shared across brands, or even across trims of one model. Match the listed model, year and seat count to your machine.

All UTV Parts & Accessories 399 parts

Showing 1–12 of 399 resultsSorted by popularity

How UTV parts differ from truck parts

Side-by-sides are built around narrow, light chassis with short-travel or long-travel suspension, and parts are rarely interchangeable between brands. Bolt patterns are often 4 on 136, 4 on 156 or 4 on 110, not the truck patterns you may be used to, and axle and cage designs vary by model. Always search by exact model name and year, since a trim or model-year change can alter mounting points.

Choosing by upgrade type

  • Wheels and tires: confirm bolt pattern, offset and tire diameter against fender clearance and the machine's gearing.
  • Armor and skid plates: look at material, such as aluminum or UHMW plastic, and whether the plate covers the A-arms, belly or frame.
  • Cages, bumpers-bumpers-tire-carriers-winch-mounts-2 and roofs: check tube diameter, wall thickness and mounting method.
  • Seats and interior: harness points, seat rails and bolt-in mounting vary by chassis.
  • Lighting and whips: confirm the wattage your electrical system can supply.

Protection first

Terrain damage on a UTV tends to fall on the belly pan, A-arms and CV boots, so armor is a sensible first upgrade for rocky or brushy trails. A heavier cage or bumper adds weight high on the chassis, which affects handling, so keep additions in proportion to what the machine was designed for.

Suspension and drivetrain changes

Taller tires, wider stance kits and longer-travel suspension all change axle angles. CV axles have limits on operating angle and plunge, so a wheel or tire change should match the other parts. Larger tires also raise load on the clutch and belt. Where a part affects steering, brakes or suspension, have it installed by someone who knows your platform and torque bolts to the manufacturer's specifications.

Fitment and local rules

Use the product page to read features, part numbers and the listed vehicle fitment, then verify against the manufacturer's information. Rules for lighting, flags, spark arresters and street use differ by state and by the land you ride on, so check local regulations before you install and ride. Keep a record of part numbers and torque values for any changes, which makes later service and troubleshooting much easier, and recheck fasteners after the first few rides because new hardware can settle.

Maintenance and inspection

Side-by-sides take a beating from mud, dust and water, so inspect new parts as part of regular service. Check fasteners on skid plates, cages and bumpers-bumpers-tire-carriers-winch-mounts-2 after the first rides and again after rough trips, since vibration loosens bolts. Look at plastic and aluminum armor for cracks, and wash packed mud from around suspension arms and axle boots. Keep an eye on harnesses and light wiring, which can chafe on sharp edges. If you add accessories that draw power, such as lights or a stereo, confirm the machine's charging system can supply them, and fuse each circuit. Keep records of the accessories you add, because they affect weight, handling and the way the machine should be serviced.

Weight is worth thinking about before you stack accessories. Heavy roofs, bumpers-bumpers-tire-carriers-winch-mounts-2, winches and cargo racks raise the center of gravity and add load to springs and shocks, so spring rate and shock valving may need review if you carry a lot of gear.

Popular UTV Parts & Accessories brands

UTV Parts & Accessories FAQ

Are UTV parts interchangeable between brands?

Usually not. Chassis dimensions, bolt patterns, suspension mounts and axle designs differ between makers and often between model years. Look for parts listed for your exact make, model and year, and check the manufacturer's specifications.

What is the most useful first UTV upgrade?

It depends on how you ride. For rocky or wooded trails, skid plates and A-arm guards protect the parts most likely to be damaged. For general trail use, many owners start with tires or seats. Match upgrades to the terrain.

Do bigger tires hurt a UTV?

They can. Larger or heavier tires raise load on the drivetrain, effectively change gearing, and can stress the belt and CV axles. Stay near the size recommended for your model and check fender clearance at full suspension travel.