Overview
The G2 2-2043-488 is a 4.88 ratio rear ring and pinion for the Toyota 8 inch V6 rear axle. It works with all ratio carriers and covers the Toyota 7.5 inch and 8 inch axle types.
G2 describes these gears as made for oversized tires and high performance engines. They are built from computer heat treated 8620 steel with double shot peened and double lapped surfaces, to O.E. specifications.
Key features
- 4.88 ratio rear ring and pinion
- Toyota 8 inch V6 rear axle
- Works with all ratio carriers
- Computer heat treated 8620 steel
- Double shot peened surfaces
- Double lapped gear set
- Manufactured to O.E. specifications
- 10 year warranty from G2
Choosing a 4.88 ratio
A 4.88 ratio turns the driveshaft more times for each wheel revolution than a taller gear would. That extra leverage helps when a truck carries larger tires or climbs slowly over rocks, where engine speed matters more than top-end cruising. Before committing, measure the tire diameter you plan to run long term, since the final gearing depends on both numbers together.
Gear changes rarely stand alone. Many owners replace the pinion bearings, crush sleeve and carrier shims at the same time so the new set seats correctly. Check the existing carrier bearings for play or rough feel before installation, and keep setup records so future service goes faster.
- Measure tire diameter before choosing a ratio
- Inspect carrier bearings and seals during the swap
- Keep pinion depth and backlash notes for future service
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2043-488 |
| UPC | 631410094374 |
| Gear ratio | 4.88 |
| Axle location | Rear |
| Axle type | Toyota 7.5 inch and Toyota 8 inch |
| Popular axle manufacturer | Toyota |
| Carrier requirement | All ratio carriers |
| Material | Computer heat treated 8620 steel |
Vehicle fitment
The set covers the Toyota 7.5 inch and 8 inch axle types at a 4.88 ratio. Confirm the axle size and year before ordering.
Only the Toyota 7.5 inch and Toyota 8 inch is named for this 4.88 set. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A driveline shop should set pinion depth, backlash and bearing preload on the Toyota 8 inch gears, followed by a break-in period on the 4.88 ratio.
What’s included
A matched ring and pinion for the Toyota 8 inch V6 rear axle.














