G2 Axle and Gear
Showing 625–672 of 1013 resultsSorted by popularity
-
Axle Truss
G2 Dana 44 Front Axle Top Truss – 68-2051-1
- Front Dana 44 top truss for the Jeep Wrangler JK, 2007-2018
- Heavy-duty steel with 1/4-inch main components and 1/8-inch reinforcement plates
- Welding required, including to the cast center section
- Two-door and four-door JK models for US-spec vehicles
- Part number 68-2051-1, UPC 631410121209
SKU: G/268-2051-1 -
-
-
-
Ring and Pinions
G2 Chrysler 9.25 Inch Rear 4.10 Ratio Ring and Pinion – 2-2028-410
- G2 Axle and Gear 4.10 ratio ring and pinion for the Chrysler 9.25 inch rear axle, part 2-2028-410
- Works with all ratio carriers
- Computer heat treated 8620 steel, double shot peened, double lapped
- 10 year warranty from G2
SKU: G/22-2028-410 -
Ring and Pinions
G2 Dana 30 Standard 4.10 Ratio Ring and Pinion – 2-2032-410
- G2 Axle and Gear 4.10 ratio ring and pinion for the Dana 30 standard axle, part 2-2032-410
- For use with 3.73 and up carriers
- Computer heat treated 8620 steel, double shot peened, double lapped
- 10 year warranty from G2
SKU: G/22-2032-410 -
Ring and Pinions
G2 Chrysler 9.25 Inch Rear 3.90 Ratio Ring and Pinion – 2-2028-390
- G2 Axle and Gear 3.90 ratio ring and pinion for the Chrysler 9.25 inch rear axle, part 2-2028-390
- Works with all ratio carriers
- Computer heat treated 8620 steel, double shot peened, double lapped
- 10 year warranty from G2
SKU: G/22-2028-390 -
Ring and Pinions
G2 Dana 30 TJ/WJ/XJ/ZJ Front Short 3.73 Ratio Ring and Pinion – 2-2031-373
- Dana 30 short front 3.73 ring and pinion gear set
- For 1997–2005 TJ, 1999–2005 WJ, 2000–2005 XJ and 1996.5–1998 ZJ front axles
- For a 3.73 and up carrier
- Part number 2-2031-373, 10 year warranty
SKU: G/22-2031-373 -
-
Ring and Pinions
G2 GM 8.5 Inch 10 Bolt 3.42 Ratio Ring and Pinion – 2-2021-342
- G2 Axle and Gear 3.42 ratio ring and pinion for GM 10 bolt 8.5 inch and 8.6 inch axles, part 2-2021-342
- Fits front and rear locations
- For use with 2.73 and up carriers
- The 8.6 inch version works with the 35-2022 Master Kit
SKU: G/22-2021-342 -
Ring and Pinions
G2 Ford 8.8 Inch 4.56 Ratio Ring and Pinion – 2-2013-456
- G2 Axle and Gear 4.56 ratio ring and pinion for the Ford 8.8 inch rear axle, part 2-2013-456
- Works with all ratio carriers
- Computer heat treated 8620 steel, double shot peened, double lapped
- 10 year warranty from G2
SKU: G/22-2013-456 -
-
Ring and Pinions
G2 Chrysler 8.25 Inch 4.56 Ratio Ring and Pinion – 2-2029-456
- G2 Axle and Gear 4.56 ratio ring and pinion for the Chrysler 8.25 inch rear axle, part 2-2029-456
- For use on 2.56 and up carriers
- Computer heat treated 8620 steel, double shot peened, double lapped
- 10 year warranty from G2
SKU: G/22-2029-456 -
-
Ring and Pinions
G2 Toyota Land Cruiser 9.5 Inch 4.88 Ratio Ring and Pinion – 2-2044-488
- G2 Axle and Gear 4.88 ratio ring and pinion for the Toyota 9.5 inch axle, part 2-2044-488
- Works with all ratio carriers
- Computer heat treated 8620 steel, double shot peened, double lapped
- 10 year warranty from G2
SKU: G/22-2044-488 -
-
Ring and Pinions
G2 GM 10.5 Inch 14 Bolt Thick 5.38 Ratio Ring and Pinion – 2-2023-538X
- G2 Axle and Gear 5.38 ratio thick ring and pinion for the GM 14 bolt 10.5 inch rear axle, part 2-2023-538X
- For use with 4.10 and down carriers
- Computer heat treated 8620 steel, double shot peened, double lapped
- 10 year warranty from G2
SKU: G/22-2023-538X -
Dana 44 Ring and Pinion
G2 Dana 44 JK Rear 5.38 Ratio Ring and Pinion – 2-2052-538
- G2 Dana 44 JK rear ring and pinion with a 5.38 ratio, part number 2-2052-538
- Based on the product name, for the rear Dana 44 axle in the 2007–2018 Jeep Wrangler (JK)
- Made for a 3.73 and down carrier
- 10-year warranty
SKU: G/22-2052-538 -
-
Ring and Pinions
G2 Dana 35 Rear 4.88 Ratio Ring and Pinion – 2-2049-488
- G2 Axle and Gear 4.88 ratio ring and pinion for the Dana 35 rear axle, part 2-2049-488
- For use with 3.54 and up carriers
- Computer heat treated 8620 steel, double shot peened, double lapped
- 10 year warranty from G2
SKU: G/22-2049-488 -
Ring and Pinions
G2 Ford 10.25 Inch Long 4.10 Ratio Ring and Pinion – 2-2046-410L
- G2 Axle and Gear 4.10 ratio long ring and pinion for the Ford 10.25 inch rear axle, part 2-2046-410L
- Works with all ratio carriers
- Fits the Ford 10.5 inch housing with the 35-2046 Master Kit
- Computer heat treated 8620 steel, double shot peened, double lapped
SKU: G/22-2046-410L -
Ring and Pinion Installation Kits
G2 Dana 44 TJ Rubicon Master Ring and Pinion Installation Kit – 35-2045
Ring and Pinion Installation KitsG2 Dana 44 TJ Rubicon Master Ring and Pinion Installation Kit – 35-2045
- Master ring and pinion installation kit for the Jeep Wrangler TJ Rubicon Dana 44, part number 35-2045
- Includes Timken pinion and carrier bearings with races
- Made for 2003–2006 Rubicon Dana 44 axles.
- Pinion nut, pinion seal, crush sleeve, shims and ring gear bolts included
SKU: G/235-2045 -
-
Ring and Pinions
G2 Dana 35 Rear 3.73 Ratio Ring and Pinion – 2-2049-373
- G2 Axle and Gear 3.73 ratio ring and pinion for the Dana 35 rear axle, part 2-2049-373
- For use with 3.54 and up carriers
- Computer heat treated 8620 steel, double shot peened, double lapped
- 10 year warranty from G2
SKU: G/22-2049-373 -
Ring and Pinions
G2 Toyota Tacoma 8.4 Inch 4.88 Ratio Ring and Pinion – 2-2056-488
- G2 Axle and Gear 4.88 ratio ring and pinion set for the 8.4 inch Toyota Tacoma axle, part 2-2056-488
- For use with a 3.54 and up carrier
- Computer heat treated 8620 steel, double shot peened, double lapped
- 10 year warranty; no model years listed
SKU: G/22-2056-488 -
Ring and Pinions
G2 Dana 30 XJ/YJ Front Reverse 4.56 Ratio Ring and Pinion – 2-2032-456R
- G2 Axle and Gear 4.56 ratio front reverse ring and pinion, part 2-2032-456R
- Fits the Jeep XJ Cherokee (1984-1999) and YJ Wrangler (1987-1995) front axle
- For use with 3.73 and up carriers
- Computer heat treated 8620 steel, double shot peened, double lapped
SKU: G/22-2032-456R -
-
-
Ring and Pinions
G2 GM 8.5 Inch 10 Bolt 4.56 O.E.M. Ratio Ring and Pinion – 1-2021-456
- G2 Axle and Gear 4.56 O.E.M. ratio ring and pinion for GM 10 bolt 8.5 inch and 8.6 inch axles, part 1-2021-456
- Front and rear locations
- For use with 2.73 and up carriers
- The 8.6 inch version works with the 35-2022 Master Kit
SKU: G/21-2021-456 -
Ring and Pinions
G2 Dana 60 Front Reverse Thick 5.38 Ratio Ring and Pinion – 2-2034-538RX
- G2 Axle and Gear 5.38 ratio thick front reverse ring and pinion for the Dana 60, part 2-2034-538RX
- For use with 4.10 and down carriers
- Computer heat treated 8620 steel, double shot peened, double lapped
- 10 year warranty from G2
SKU: G/22-2034-538RX -
Ring and Pinions
G2 Ford 8.8 Inch 4.88 Ratio Ring and Pinion – 2-2013-488
- G2 Axle and Gear 4.88 ratio ring and pinion for the Ford 8.8 inch rear axle, part 2-2013-488
- Works with all ratio carriers
- Computer heat treated 8620 steel, double shot peened, double lapped
- 10 year warranty from G2
SKU: G/22-2013-488 -
-
Ring and Pinions
G2 GM 9.25 Inch IFS 4.56 Ratio Ring and Pinion – 2-2096-456
- G2 Axle and Gear 4.56 ratio ring and pinion for the GM 9.25 inch IFS front axle, part 2-2096-456
- Works with all ratio carriers
- Computer heat treated 8620 steel, double shot peened, double lapped
- 10 year warranty from G2
SKU: G/22-2096-456 -
-
Dana 44 Ring and Pinion
G2 Dana 44 TJ Rubicon 4.88 Ratio Ring and Pinion – 2-2045-488
- G2 Axle and Gear 2-2045-488 Dana 44 ring and pinion, 4.88 ratio
- Built for the 2003 to 2006 Jeep Wrangler TJ Rubicon with a 3.73 DownCarrier
- Computer heat treated 8620 steel, double shot peened, 10 year warranty
SKU: G/22-2045-488 -
Ring and Pinions
G2 Dana 60 Front Reverse Thick 4.88 Ratio Ring and Pinion – 2-2034-488RX
- G2 Axle and Gear 4.88 ratio thick front reverse ring and pinion for the Dana 60, part 2-2034-488RX
- For use with 4.10 and down carriers
- Computer heat treated 8620 steel, double shot peened, double lapped
- 10 year warranty from G2
SKU: G/22-2034-488RX -
Ring and Pinions
G2 GM 11.5 Inch AAM 14 Bolt 4.56 Ratio Ring and Pinion – 2-2024-456
- G2 Axle and Gear 4.56 ratio ring and pinion for the 11.5 inch AAM rear axle, part 2-2024-456
- Fits the Chrysler 11.5 inch housing
- Works with all ratio carriers
- Computer heat treated 8620 steel, double shot peened, double lapped
SKU: G/22-2024-456 -
Dana 44 Ring and Pinion
G2 Dana 44 4.89 Ratio Ring and Pinion – 2-2033-489
- Ring and pinion gear set for Dana 44 axles, 4.89 ratio
- For use with a 3.91 and up carrier
- Computer heat treated 8620 steel, double shot peened, double lapped
- Manufactured to O.E. specifications, with a 10 year warranty
- Part 2-2033-489, UPC 631410094046
SKU: G/22-2033-489 -
Ring and Pinions
G2 Dana 30 JK Front Reverse 5.13 Ratio Ring and Pinion – 2-2050-513R
- G2 Axle and Gear 5.13 ratio front reverse ring and pinion for the Dana 30 JK front axle, part 2-2050-513R
- For use with 3.73 and up carriers
- Computer heat treated 8620 steel, double shot peened, double lapped
- 10 year warranty from G2
SKU: G/22-2050-513R -
Ring and Pinions
G2 GM 8.5 Inch 10 Bolt 3.73 Ratio Ring and Pinion – 2-2021-373
- G2 Axle and Gear 3.73 ratio ring and pinion for GM 10 bolt 8.5 inch and 8.6 inch axles, part 2-2021-373
- Fits front and rear locations
- For use with 2.73 and up carriers; the 8.6 inch version works with the 35-2022 Master Kit
- Computer heat treated 8620 steel, double shot peened, double lapped
SKU: G/22-2021-373


































