Select your vehicle

G2 Toyota 8 Inch FJ IFS Clamshell Master Ring and Pinion Installation Kit – 35-2057

G2 Axle and Gear

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • For the Toyota 8 inch clamshell IFS front axle
  • Timken pinion and carrier bearings with races
  • Shims, crush sleeve, pinion seal and nut
  • Part number 35-2057

Description

Overview

The G2 Axle and Gear 35-2057 is a master ring and pinion installation kit for the Toyota FJ 8 Inch Clamshell IFS front axle.

Toyota owners rebuilding the clamshell-style independent front axle will find this kit lines up with that job. G2’s 35-2057 holds Timken pinion and carrier bearings with races, shim packs, a crush sleeve, a nut and seal, ring gear bolts, and the compounds used for assembly.

The clamshell front axle is an independent design, and G2 names it in this kit’s title for the Toyota FJ. The master kit’s Timken bearings, races, shims and crush sleeve renew the wearing parts, while the thread locker and silicone sealer handle the fasteners and the housing seal. Gear marking compound is included so the pattern can be judged before the axle goes back together.

Key features

  • Master installation kit for the Toyota FJ 8 Inch Clamshell IFS axle (front)
  • Includes pinion Nut
  • Includes pinion Seal
  • Includes Timken Outer Pinion Bearing and Race
  • Includes crush Sleeve
  • Includes Timken Inner Pinion Bearing and Race
  • Includes pinion Shims
  • Includes carrier Shims
  • Includes carrier Bearings and Races
  • Includes ring Gear Bolts

Setting shim depth

Clamshell housings are built so the carrier and pinion can be set up with the housing open, which makes shim selection easier to check by feel and by measurement. Pinion depth is the first setting to get right, because every other fit depends on it. Once the depth is close, set preload and then confirm the tooth contact pattern with marking compound.

Keep the shim packs sorted and labeled as you remove them, and measure each pack with a micrometer before reuse. Old crush sleeves should never be reused, so swap in the new sleeve and set preload gradually. Stop tightening when the preload is in range rather than pulling the nut down hard in one step. Write down each final shim thickness for future service.

Specifications

Brand G2 Axle and Gear
Part number 35-2057
UPC 631410096064
Kit type Master kit with bearings
Axle location Front
Axle type Toyota FJ 8 Inch Clamshell IFS
Axle manufacturer Toyota

Vehicle fitment

The kit is made for the Toyota 8 inch clamshell IFS front axle, sold under the FJ name. Verify the front differential type on your truck before ordering.

Confirm your vehicle’s axle type, spline count and year before ordering.

Installation notes

A clamshell housing opens in two halves, so the carrier and pinion are set up on the bench or in the vehicle with care. Use the shims to reach the right depth, then check the pattern with the marking compound.

Before opening the Toyota FJ 8 Inch Clamshell IFS housing for the 35-2057 job, gather a dial indicator, a torque wrench and clean gear oil. Record the original gear pattern, because the 35-2057 shims are the tool for moving the new pattern toward it. Fit the new nut and seal. Sort shims by thickness.

What’s included

  • Pinion Nut
  • Pinion Seal
  • Timken Outer Pinion Bearing and Race
  • Crush Sleeve
  • Timken Inner Pinion Bearing and Race
  • Pinion Shims
  • Carrier Shims
  • Carrier Bearings and Races
  • Ring Gear Bolts
  • Thread Locking Compound
  • Gear Marking Compound
  • Silicone Sealer

Not included: ring and pinion gears; the 35-2057 supplies installation parts for the Toyota FJ 8 Inch Clamshell IFS axle only.

SKU: G/235-2057 Category:

Specification

Shipping weight 10.00 lbs
Package dimensions 12.90 × 12.80 × 3.10 in
brands

Questions & Answers

What axle does the 35-2057 kit fit?

It is made for the Toyota 8 inch clamshell IFS front axle, which carries the FJ name. Confirm that your front differential is that clamshell design before ordering, because the kit is built for that axle only.

What is included in the 35-2057 kit?

The box has a pinion nut, pinion seal, crush sleeve, Timken inner and outer pinion bearings with races, pinion shims, carrier shims, carrier bearings with races, ring gear bolts, thread locker, marking compound and silicone sealer.

Does the 35-2057 include the gears?

No. The kit holds installation parts only, including bearings, shims, seal and nut. A matching ring and pinion set must be bought separately before the rebuild starts.

Can the old crush sleeve be reused on a clamshell rebuild?

No. A crush sleeve deforms when the nut is tightened, so it is designed to be used once. Install the new sleeve from the kit and set preload gradually to avoid overtightening the pinion.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon