Overview
The G2 Axle and Gear 2-2014-410 is a 4.10 ratio ring and pinion for the Ford 7.5 inch rear axle. It is made for the rear location and works with all ratio carriers, so the carrier does not restrict the set.
Per G2, the gears are built for oversized tires and high performance engines. They use computer heat treated 8620 steel with double shot peened and double lapped surfaces, and G2 says they meet O.E. specifications.
Key features
- 4.10 ratio rear ring and pinion
- Ford 7.5 inch rear axle
- Works with all ratio carriers
- Computer heat treated 8620 steel
- Double shot peened surfaces
- Double lapped gear set
- Manufactured to O.E. specifications
- 10 year warranty from G2
Break-in after installation
A new ring and pinion set is run in gradually before the axle carries heavy loads. Early miles are best spent on easy throttle and gentle braking so the tooth faces can settle into their contact pattern. Lubricant should be changed to the type the carrier needs once the break-in is finished, and the fill level should be checked at the same time.
Gears used with larger tires put more load on the pinion bearings, so inspect the pinion nut torque and cover bolts after the first few outings. Note any new whine, metal particles in the gear oil, or a clunk when shifting between drive and reverse, and have a driveline shop look at the gears if any of those appear.
- Re-check cover bolts after the first few drives
- Change gear oil once the break-in is complete
- Watch for whine that changes with load
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2014-410 |
| UPC | 631410105216 |
| Gear ratio | 4.10 |
| Axle location | Rear |
| Axle type | Ford 7.5 inch |
| Popular axle manufacturer | Ford |
| Carrier requirement | All ratio carriers |
| Material | Computer heat treated 8620 steel |
Vehicle fitment
This 4.10 set is made for the Ford 7.5 inch rear axle. Confirm your vehicle’s year, model and trim before ordering.
Only the Ford 7.5 inch is named for this 4.10 set. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Have pinion depth, backlash and bearing preload set by a driveline shop on the 7.5 inch gears, then complete a break-in period.
What’s included
A matched ring and pinion for the Ford 7.5 inch rear axle.














