Select your vehicle

Dana 44 Axle Parts, Axles, Gears, and Modifications

This is the Dana 44 axle category, with parts and assemblies for front and rear axles. It covers ring and pinion sets, axle shafts, bearings and install kits, seals, lockers and spools, limited slip and open differential parts, hubs, spindles, ball joints, U-joints, yokes, and covers. Brands include G2 Axle and Gear, Dana Spicer, Crown Automotive, and Omix-Ada. Open a product page for details and part numbers.

Dana 44 front axle housing

The Dana 44 is the Dana Corporation's most popular and versatile axle. It balances strength and weight well, and it suits off-roaders running up to 33" tires, or 35" tires with aftermarket shafts and U-joints.

It started life under the 1948 Jeep CJ and still ships under Jeep's Gladiator today. Every major American automaker has used it, and it has even appeared under the Corvette and some Jaguars.

8.5" / 8.9"Ring gear (8.9" JK)
2.72–5.89:1Gear ratios
10–35Axle spline counts
4,460 ft-lbsPeak static torque
33–35"Tire size range
1948 →In service since

Shop Dana 44 parts

Popular Dana 44 parts

Dana 44 specification reference

Design specifications

Axle Shaft StyleFull & Semi-Float
Axle Spline Count10, 19, 29, 30, 32, 33, & 35
Carrier Breaks3.73, 3.92
C-ClipsNo
Cover Bolts10
Dropout CarrierNo
Gear Ratios2.72:1 to 5.89:1
Oil CapacityFront: 1.5 Quarts, Rear: 2 Quarts
Oil Type75W140, 80W-90
Peak Dynamic Torque1,100 ft-lbs
Peak Static Output Torque4,460 ft-lbs
Pinion Crush SleeveApplication Specific
Pinion Nut1-5/16" or 1-1/8"
Pinion Shaft Diameter1.375", 1.625" (JK rear 8.9")
Pinion Shaft Splines26/1.12", 24/1.25" (JK), & 10/1.12"
Pinion SupportNo
Ring Gear Bolts10
Ring Gear Diameter JK8.9 (226mm)
Ring Gear Diameter8.5 (216mm)

Assembly parameters

StandardJK (8.9")
Carrier Bearing Caps60 ft-lbs80 ft-lbs
Pinion Preload - New12 to 15 in-lbs22 to 35 in-lbs
Pinion Preload - Reused6 to 8 in-lbs12 to 15 in-lbs
Ring Gear Backlash.006" to .010".006" to .010"
Ring Gear Bolt Torque55 ft-lbs135 ft-lbs

Axle shaft shear strength

Stock Axle Shafts 30 Spline3,460 ft-lbs
Stock High Pinon 30 Spline4,170 ft-lbs
Chrome-Moly Shafts4,500 ft-lbs
JK 8.9 Shafts 32 Spline5,340 ft-lbs

Variations

  • Dana 44
  • Dana 44 with Axle Disconnect
  • Dana 44 Short Pinion
  • Dana 44A / 44HDA (Aluminum Housing)
  • Dana 44HD (Heavy Duty)
  • Nissan M226

Axle shaft diameters

  • 1.175" front outer (19 spline)
  • 1.20" rear (10 spline)
  • 1.30" rear (19 spline)
  • 1.31" front inner (30 spline)
  • 1.31" rear (30 spline)
  • 1.41" rear (32 spline)

Vehicles that came with a Dana 44

Factory applications by make (front or rear depending on model and year). Confirm your axle by the tag or casting numbers before ordering parts.

Chevrolet 15 models
  • Blazer1971-1974
  • C10 Panel1960-1967
  • C10 Pickup1961-1968
  • C10 Suburban1967-1980
  • C20 Suburban1967-1980
  • Camaro1985-1993
  • G101964-1972
  • K10 Pickup1961-1980
  • K10 Suburban1968-1980
  • K20 Panel1967
  • K20 Pickup1962-1980
  • K20 Suburban1968-1980
  • K30 Pickup1968-1980
  • K5 Blazer1976-1980
  • Suburban1960-1966
Dodge 7 models
  • Ram 1500 Pickup1994-2000
  • Ram 2500 Pickup1995-2001
  • Ramcharger1974-1993
  • W100 Pickup1957-1987
  • W150 Pickup1977-1993
  • W200 Pickup1957-1980
  • W250 Pickup1982-1993
Ford 7 models
  • Bronco1973-1996
  • E-1001969-1975
  • E-1501975-1979
  • F-1001953-1979
  • F-1501975-1993
  • F-2501960-1989
  • F-3501978-1979
GMC 26 models
  • C15 Suburban1975-1978
  • C15/C1500 Pickup1968
  • C15/C1500 Suburban1968-1974
  • C1500 Suburban1979-1980
  • C25 Suburban1976-1978
  • C25/C2500 Suburban1968-1974
  • C2500 Suburban1979-1980
  • G1000 Series1963-1966
  • G15/G1500 Van1967-1971
  • K1000 Pickup1966
  • K15 Pickup1976-1978
  • K15 Suburban1975-1978
  • K15/K1500 Pickup1967-1974
  • K15/K1500 Suburban1967-1974
  • K1500 Pickup1979-1980
  • K1500 Suburban1979-1980
  • K25 Pickup1976-1978
  • K25 Suburban1975-1978
  • K25/K2500 Pickup1967-1974
  • K25/K2500 Suburban1968-1974
  • K2500 Pickup1979-1980
  • K2500 Suburban1979
  • K35 Pickup1978
  • K35/K3500 Pickup1968-1974
  • K35001979-1980
  • Suburban1960-1966
International 2 models
  • Scout1968-1970
  • Scout II1971-1980
Isuzu 1 models
  • Rodeo1993-1997
Jaguar 1 models
  • Mark X1962-1965
Jeep 13 models
  • Cherokee1987-1992
  • Cj51960-1982
  • Cj61966-1974
  • Cj71986
  • Comanche1990-1992
  • Commando1968-1973
  • Fc1501966
  • Grand Wagoneer1984-1986
  • J101974-1988
  • Scrambler1982-1983
  • Wagoneer1971-1990
  • Wrangler1998-2018
  • Wrangler Jk2018
Lincoln 1 models
  • Mark II1956

All Dana 44 Axle Parts, Axles, Gears, and Modifications 469 parts

Showing 1–12 of 469 resultsSorted by popularity

About the Dana 44

The Dana 44 is a popular medium-duty axle used in Jeeps, Ford trucks and Broncos, and other 4x4s, front or rear, and it is a common base for upgrades. Variants differ by spline count, housing, and mounting, so identify your axle carefully before ordering anything. The tag on the housing, the spline count, and the vehicle application are the starting points.

Parts here span routine maintenance items like seals and bearings through full gear and locker upgrades.

Gearing and differentials

Ring and pinion sets are chosen by ratio, such as 4.10, 4.56, or 5.13, usually to compensate for larger tires. Front and rear ratios must match, and sets should be installed with a master installation kit containing bearings, shims, and seals. Gear setup requires correct pinion depth and backlash measurements.

  • Lockers and spools lock both wheels together for maximum traction.
  • Limited slip units share torque between wheels while allowing some difference in speed.
  • Open differential parts support rebuilds of the stock design.

Shafts, hubs, and wear parts

Axle shafts must match spline count and length, and some models need ABS tone rings or particular flange designs. Hubs, spindles, and ball joints wear with miles and trail use, and seals and bearings should be replaced together to protect the new components. U-joints and yokes need to match the shaft and driveline series.

Check the axle ratio, spline count, and brake configuration before purchasing any internal parts.

Installation guidance

Axle work is safety critical. Gear setup requires special tools and experience, and incorrect setup can cause noise and failure. Use jack stands, torque fasteners to specification, fill with the correct gear oil, and break in new gears gently. Professional installation is recommended for ring and pinion and locker work. Confirm fitment for your exact year, make, and model, and check the manufacturer's specifications.

Preparing for an axle project

Plan the project before tearing anything down. Identify the axle and its ratio, decide which parts to replace, and gather seals, bearings, gear oil, thread locker, and RTV or gaskets. Mark the driveshaft and carrier caps and keep parts organized.

Check axle housing straightness, tube condition, and mounting brackets. Many people upgrade axle shafts, lockers, and gears at the same time, because the housing is already open. Fill with the specified oil and drive gently for the first few hundred miles.

Spline count and axle shaft length are two of the first measurements to confirm. Dana 44 shafts come in different spline counts, and the inner and outer shafts on a front axle are different lengths on each side. Check the U-joint series, hub bolt pattern, and brake rotor mounting before choosing shafts.

Ring gear size, carrier break, and the pinion design also vary. Front and rear ring and pinion sets are not interchangeable, and a standard-rotation unit differs from a reverse-rotation unit found in some Jeep front axles. Carrier bearings and shims must be selected to suit the carrier you use.

Gear oil, additives, and limited slip friction modifiers all matter. Limited slip units often need a friction modifier, and lockers may need a particular type of oil. Check the oil level at each service, look for metal in the drain plug, and replace seals at the first sign of leaks to protect the brakes.

Related guides

Popular Dana 44 Axle Parts, Axles, Gears, and Modifications brands

Dana 44 Axle Parts, Axles, Gears, and Modifications FAQ

How do I identify a Dana 44?

Look for a tag on the axle housing, a cover shape and bolt count, and the vehicle application. Spline count and ring gear diameter can be measured. Dana 44 variants differ, so verify before ordering parts.

What gear ratio should I choose?

Pick a ratio that restores performance with your tire size. Larger tires often call for numerically higher ratios, like 4.56 or 5.13, and front and rear ratios must match. Engine, transmission, and use all matter.

Do I need a master install kit?

It is strongly recommended with new gears. The kit includes bearings, seals, and shims needed to set pinion depth and backlash correctly. Reusing worn bearings can hurt gear life.

Can I install gears myself?

Only if you have the tools and experience. Setting pinion depth and backlash is precise work, and mistakes damage new gears. Many owners use a professional shop for ring and pinion installations.