No products in the cart.
Smittybilt
Showing 1–48 of 345 results
-
-
Roll Cages & Roll Bars
Smittybilt SRC Roll Cage and Tubular Door PAK – SPTCAGEJK2LPKG
- 2-door models
- Includes front tubular doors
- Satin black powder coat finish
- 5-year limited warranty
- No drill installation
- Works with all soft goods, factory and aftermarket tops
- Requires modification to factory roll bar covers
- Will not work along with A-pillar switch pods
SKU: S/BSPTCAGEJK2LPKG -
-
Light Bar Mounting Kit
Smittybilt 4′ Defender Rack Light Bar Mount Kit – D8084
- Dual-level LED light bar mounting system can accommodate LED light bar up to the width of your Defender by Smittybilt rack
- CNC-machined light tabs (4) track on to 1″ bars (included)
- No drilling required, side brackets included
- Lights sold separately
SKU: S/BD8084 -
Front Bumpers
Smittybilt SRC Gen2 Front Bumper Package (Black) – BMPRPKG2.1
- 2 and 4-door models
- Textured black powdercoat
- OE fog light provision
- Lower design winch plate allows greater air flow and rated to accommodate up to 12k winch
- 2 inch x .120 inch wall 2 inch Class III Receiver
- New max solid D-ring and jack point mount – welded on the inside and out
- Bumpers bolt directly to your vehicle
- 5-year limited warranty
SKU: S/BBMPRPKG2.1 -
-
Uncategorized
Smittybilt XRC 9.5K GEN2 Waterproof 9500lb Winch – 97495
- Rated line pull: 9,500 lbs. (4,309kgs) single-line
- Motor: 6.6hp series wound
- Control: remote switch, 12″ (3.7m) lead
- Gear Train: 3-stage planetary
- Gear ratio: 161.28:1
- Waterproofing: IP67 rating
- Fairlead: 4-way roller
- Weight: 78.0 lbs. (35.0 k)
- Bolt pattern: 10.0″ x 4.5″
- Brake: automatic In-drum
- Overall dimensions (L x W x H): 22.3″ x 5.4″ x 9.4″
- Drum size: diameter 2.5″
- Cable type: wire rope
- Cable: 93.5 5/16″ diameter
- Limited 3 year warranty on electrical components
- Winch plate sold separately
SKU: S/B97495 -
Soft Tops
Smittybilt Cloak Extended Mesh Top (Black Mesh) – 95500
- 4-door models
- Black mesh
- Extended Mesh Top only
- Easy install no tools needed
- No header required
- Stays on with hard or soft top installed
- Reduces wind noise
- Installs with heavy-duty bungee cords
- UV and mildew resistant
- Durable long lasting PVC coated mesh material
- Reduces the heat and glare of the sun while allowing cool air to flow through
- Rear and sides sold seperately part #S/B95501
SKU: S/B95500 -
Soft Tops
Smittybilt Cloak Extended Mesh Top (Black Mesh) – 95100
- 2-door models
- Black mesh
- Top only
- Easy install no tools needed
- No header required
- Stays on with hard or soft top installed
- Reduces wind noise
- Installs with heavy duty bungee cords
- UV and mildew resistant
- Durable long lasting PVC coated mesh material
- Reduces the heat and glare of the sun while allowing cool air to flow through
- Rear and sides sold seperately part #S/B95101
SKU: S/B95100 -
-
Soft Tops
Smittybilt Replacement Soft Top with Tinted Windows (Black Diamond) – 9080235
- 4-door models
- Black diamond
- Complete OE replacement
- Marine grade durable vinyl
- Seams are heat sealed to prevent leaking
- Wick stop threads seals the stitch holes
- Requires factory door surrounds and hardware for installation (not included)
SKU: S/B9080235 -
-
-
Front Bumpers
Smittybilt XRC Atlas Front Bumper with Grill Guard and Fog Light Holes (Black) – 76892
Front BumpersSmittybilt XRC Atlas Front Bumper with Grill Guard and Fog Light Holes (Black) – 76892
- 2 and 4-door models
- Factory 10th Anniversary Rubicon lights will not Innovative 3-piece design
- Lower design winch plate allowing greater air flow
- Two stage textured matte black finish
- Manufactured from 3/16 cold rolled steel
- Bumper bolts directly to your vehicle
- Two 3/4 inch d-ring mounts
- 5 year limited warranty
SKU: S/B76892 -
-
Rear Bumpers
Smittybilt XRC Gen2 Rear Bumper (Black) – 76858
- 07-Current Wrangler JK, 2 and 4 Door
- Two-Stage Textured Matte Black Finish
- New Solid D-Ring And Jack Point Mount – Welded On The Inside And Out!
- Aggressive Design For With Raised Corners For Better Entry And Exit Angles For The Most Extreme Conditions
- Aux Back Up Light Cut Out Provided
- Manufactured From 3/16-Inch Cold Rolled Steel
- Towable D-Ring Mounts
- Powder Coat Finish – 5 Year Limited Warranty
- Smittybilt Limited Lifetime Warranty
- Modular Design, Tire Carrier Can Be Added In The Future.
- Class III Hitch For True Towing
- Anti-Rattle Provision Provided For Receiver Hitch
- LED Lights Included
SKU: S/B76858 -
Fender Flares
Smittybilt XRC Flux Front Fender Flare Set (Paintable) – 76838
- 2 and 4-door models
- Front flares
- CNC-bent 1.5″ diameter tubes covered with 1/8″ laser cut cold rolled sheet metal
- 6″ wide double articulation tube fenders, providing extra 3″ of suspension travel
- Provides extra outer tire clearance for larger tires under full suspension articulation
- 3/4″ LED turn signal lights included
- Minimal modification for installation
- Bolts to OE mounting points
- Spacers and brackets included for extra strength
- Preserves factory inner liner
- Sold as a pair
SKU: S/B76838 -
-
Front Bumpers
Smittybilt XRC Rock Crawler Winch Front Bumper with Grill Guard and D-ring Mounts (Black) – 76800
Front BumpersSmittybilt XRC Rock Crawler Winch Front Bumper with Grill Guard and D-ring Mounts (Black) – 76800
- 2-stage Textured black powder coat
- Degree approach angles and raised corners
- 3/16″ cold rolled steel
- Stinger is 1.75″ tubing
- Accepts up to two 9″ lights
- Bumpers bolt directly to your vehicle
- 5-year limited warranty
SKU: S/B76800 -
Front Bumpers
Smittybilt SRC Gen2 Front Bumper – Black Textured (Black) – 76724
- 2 and 4-door models
- Factory 10th Anniversary Rubicon lights will not New max solid d-ring and jack point mount – welded on the inside and out!
- Aggressive design for with raised corners for better entry and exit angles for the most extreme conditions
- Fender to fender protection
- 2″ 120 Wall over rider and kickers
- Lower design winch plate allows greater air flow and rated to accommodate up to 12k winch
- Stock fog light provision
- Manufactured from 3/16″ cold rolled steel
- Tow-able D-ring mounts
- Two-stage textured matte black powder coat finish with 5-year limited warranty
- Smittybilt Advantage limited lifetime warranty
SKU: S/B76724 -
Front Bumpers
Smittybilt SRC Front Grille Guard Bumper with D-ring Mounts (Black) – 76721
- Textured black powdercoat
- Four taps to mount lights
- Wide opening allows for winch installation
- 1/4 inch thick custom mounting brackets
- Welded D-ring tabs
- Durable 2 inchx.120 inch wall over built
- Bumpers bolt directly to your vehicle
- Requires no drilling or modifications
- 5-year limited warranty
SKU: S/B76721 -
Rock Sliders and Guards
Smittybilt Rock Crawler Side Armor (Black) – 76634
- 4-door models
- One-piece design – manufactured from 1.75″ .120 wall tubing
- Dual girder system provides the ultimate protection for the sides and under section of your wrangler
- Provides protection and a step at the same time
- Bolts up without drilling or modifications to the vehicle
- Wheel to wheel for maximum protection
- Finished in the signature series matte black textured powder coat
SKU: S/B76634 -
Rear Bumpers
Smittybilt SRC Gen2 Rear Bumper (Black) – 76614
- 2 and 4-door models
- Two-stage textured matte black finish
- New solid D-ring and jack point mount – Welded on the inside and out
- Fender to fender protection
- Aggressive design for with raised corners for better entry and exit angles
- Aux back up light cut out provided/lights included
- Towable D-ring mounts
- Two-stage textured matte black finish
- Smittybilt Limited Lifetime Warranty
- Modular design – Tire Carrier can be added in the future (S/B76857).
- Class III hitch for True towing
- Anti-Rattle Provision Provided for Receiver Hitch
- Recomended shackle:Smittybilt 3/4″ D-Ring Shackle (13047B)
SKU: S/B76614
