Overview
The G2 Axle and Gear 2-2013-355 is a 3.55 ratio ring and pinion for the Ford 8.8 inch rear axle. It works with all ratio carriers and is made for the rear location.
A 3.55 ratio is numerically lower than the 4.10 and 4.88 options, so it gives less torque multiplication at the wheels. The set is built from computer heat treated 8620 steel with double shot peened and double lapped surfaces.
Key features
- 3.55 ratio rear ring and pinion
- Ford 8.8 inch rear axle
- Works with all ratio carriers
- Computer heat treated 8620 steel
- Double shot peened surfaces
- Double lapped gear set
- Manufactured to O.E. specifications
- 10 year warranty from G2
Gearing and the 3.55 ratio
Gear ratio is the number of driveshaft turns needed for one wheel turn. A 3.55 ratio sits at the lower end of the common rear gear range, so the engine runs at lower speed on the highway, which can help fuel use and quiet cruising. The trade-off is less pull from a stop, especially with larger tires or added weight. Think about the vehicle’s normal load before choosing a numerically lower set.
Replacing the gears is also a chance to inspect the rest of the rear end. Carrier bearings, pinion bearings and the pinion seal all shape how the new set meshes, and replacing them together keeps preload accurate. Look at the axle shafts for play, and check the old teeth for chips or uneven wear before the new gears go in.
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2013-355 |
| UPC | 631410093438 |
| Gear ratio | 3.55 |
| Axle location | Rear |
| Axle type | Ford 8.8 inch |
| Popular axle manufacturer | Ford |
| Carrier requirement | All ratio carriers |
| Material | Computer heat treated 8620 steel |
Vehicle fitment
It fits the Ford 8.8 inch rear axle at a 3.55 ratio.
Only the Ford 8.8 inch is named for this 3.55 set. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Pinion depth, backlash and bearing preload on the 3.55 gears should be set by a driveline shop, with a break-in period afterward.
What’s included
A matched ring and pinion for the Ford 8.8 inch rear axle.














