Overview
The G2 Axle and Gear 35-2033 is a master ring and pinion installation kit for Dana 44 axles, usable at the front and rear. It contains the full set for a ring and pinion job, including bearings, so the old bearings do not need to be reused.
The kit includes Timken inner and outer pinion bearings and races, carrier bearings and races, a pinion nut, pinion seal, crush sleeve, pinion and carrier shims, ring gear bolts, thread locking compound, gear marking compound and silicone sealer. No vehicle is named for this part number.
Key features
- Master kit with bearings for Dana 44 front and rear axles
- Timken inner and outer pinion bearings with races
- Carrier bearings and races
- Crush sleeve, pinion nut and pinion seal
- Shim sets, ring gear bolts and compounds
Ring and pinion preload basics
Preload is the resistance the pinion bearings have when the pinion nut is tightened, and it keeps the pinion from moving under load. Too little preload lets the gears chatter, while too much heats the bearings and wears them quickly. Set preload with the crush sleeve or shim pack as the setup process for your gear set directs.
Backlash is the small gap between the ring and pinion teeth. It is set with the carrier shims or adjusters, and it must stay within a narrow range so the gears neither bind nor knock. Marking compound on the ring gear shows where the teeth meet, and small changes to shims move that contact.
A Dana 44 gear job is often done with the axle out of the vehicle, which makes shim work and cleaning easier. Clean the carrier thoroughly, check the bearing bores for wear, and replace any worn cover gasket. Fill with the correct gear oil once the set is verified.
- Clean the carrier before reassembly
- Check bearing bores for wear
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 35-2033 |
| UPC | 631410095814 |
| Axle location | Front and rear |
| Axle type | Dana 44 |
| Kit type | Master kit with bearings |
| Bearings | Timken pinion inner and outer, carrier bearings and races |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. Check your axle, ring gear and pinion size against the kit before buying.
Because no vehicle is named, confirm the axle type, ring gear size and bearing setup on your own vehicle before ordering.
Installation notes
Gear set setup depends on shim thickness and tooth contact, so use the gear marking compound to check the pattern while setting the shims. Ring and pinion setup is precise work that many people have done by a professional.
What’s included
Ring gear bolts, a crush sleeve, a pinion nut and seal, pinion and carrier shims, and Timken pinion and carrier bearings with races, plus the thread locking, gear marking and silicone compounds.













