Select your vehicle

G2 Ford 7.5 Inch 4.56 Ratio Ring and Pinion – 2-2014-456

G2 Axle and Gear

Shop G2 Axle And Gear Ring And Pinions on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • G2 Axle and Gear 4.56 ratio ring and pinion for the Ford 7.5 inch rear axle, part 2-2014-456
  • Works with all ratio carriers
  • Computer heat treated 8620 steel, double shot peened, double lapped
  • 10 year warranty from G2

Description

Overview

The G2 Axle and Gear 2-2014-456 is a 4.56 ratio ring and pinion for the Ford 7.5 inch rear axle. It is made for the rear location and works with all ratio carriers.

The gears are built for oversized tires and high performance engines. They use computer heat treated 8620 steel with double shot peened and double lapped surfaces.

Key features

  • 4.56 ratio rear ring and pinion
  • Ford 7.5 inch rear axle
  • Works with all ratio carriers
  • Computer heat treated 8620 steel
  • Double shot peened surfaces
  • Double lapped gear set
  • Manufactured to O.E. specifications
  • 10 year warranty from G2

Choosing a 7.5 inch gear set

The 7.5 inch Ford axle is a smaller rear housing, and the ring and pinion inside it is sized for lighter loads than larger axles. A 4.56 ratio raises the torque delivered to the wheels, which many owners want for bigger tires or light hauling. Pick the ratio based on how the vehicle is used, and keep in mind that gearing changes engine speed at highway speed.

Replacing the ring and pinion is a good time to renew the carrier bearings, pinion seal and axle seals. Old bearings can allow the gears to shift off mesh, which leads to whine or early tooth wear. Look for chipped teeth, rough bearings or fluid with metal flakes. After the first drives, check for leaks and keep the fluid clean.

Specifications

Brand G2 Axle and Gear
Part number 2-2014-456
UPC 631410105223
Gear ratio 4.56
Axle location Rear
Axle type Ford 7.5 inch
Popular axle manufacturer Ford
Carrier requirement All ratio carriers
Material Computer heat treated 8620 steel

Vehicle fitment

It fits the Ford 7.5 inch rear axle at a 4.56 ratio. Measure your housing before ordering.

Only the Ford 7.5 inch is named for this 4.56 set. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The 7.5 inch 4.56 gears should be installed with pinion depth, backlash and bearing preload set by a driveline shop, followed by a break-in period.

What’s included

A matched ring and pinion for the Ford 7.5 inch rear axle.

SKU: G/22-2014-456 Category:

Specification

Shipping weight 15.00 lbs
Package dimensions 12.00 × 11.00 × 5.50 in
brands

Questions & Answers

Which Ford axle is the 2-2014-456 ring and pinion for?

It is made for the Ford 7.5 inch rear axle. Check your housing size and the year, model and trim of your vehicle before ordering, since the case decides the final fit.

Is there a carrier limit on this 4.56 set?

It works with all ratio carriers, so the carrier does not limit the choice. Pinion depth, backlash and bearing preload still need to be set during installation.

What is the gear made from?

The 4.56 gears are computer heat treated 8620 steel with double shot peened surfaces and double lapped teeth. G2 says they are manufactured to O.E. specifications and carry a 10 year warranty.

How soon should rear axle fluid be changed after a gear swap?

Change the fluid after the break-in period, once the new gears have settled. Afterward, follow a regular schedule and inspect for metal flakes at each change. Clean fluid helps protect the new tooth surfaces.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop G2 Axle And Gear Ring And Pinions on Amazon