Overview
The G2 Axle and Gear 2-2095-456 is a ring and pinion set for the GM 8.25 inch IFS front axle, with a 4.56 gear ratio. The ring and pinion is the gear pair inside the differential that turns the driveshaft’s rotation into wheel rotation, and the ratio sets how many driveshaft turns it takes to turn the wheel once.
The gears are made from computer heat treated 8620 steel to O.E. specifications, shot peened twice and double lapped. They work with all ratio carriers. The set comes with a 10 year warranty and is built for oversized tires and high performance engines.
Key features
- Computer heat treated 8620 steel
- Double shot peened
- Double lapped gear finish
- Manufactured to O.E. specifications.
- Works with all ratio carriers
- 10 year warranty
Setup and break-in
On an independent front suspension axle, the ring and pinion works through a shorter, more compact housing than a solid axle, so bearing preload and pinion depth leave little room for error. Setup is best handled by an installer who can check backlash and tooth contact with marking compound before the cover is sealed.
Break-in matters for a gear pair that will see larger tires or more torque. Keep loads and speeds moderate for the first stretch of driving, then check the axle for heat, noise and leaks. Gear oil should be replaced after break-in to clear any fine metal from the teeth.
Speed sensors and the front driveline are often reached during the same job, so inspect the seals and the pinion yoke while the axle is open. Wear that shows as chipped teeth or uneven contact means the set needs replacing.
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2095-456 |
| UPC | 84274400093 |
| Axle location | Front |
| Axle type | GM 8.25 inch IFS |
| Gear ratio | 4.56 |
| Material | 8620 steel, computer heat treated |
| Surface treatment | Double shot peened, double lapped |
| Warranty | 10 years |
Vehicle fitment
The set is built for the GM 8.25 inch IFS front axle. Confirm the axle housing and carrier fit your vehicle before ordering.
Installation notes
Gear sets need professional setup and a break-in period before regular driving.
What’s included
The ring and pinion gear set. Bearings and the carrier are not part of this item.
















