G2 Axle and Gear
Showing 769–816 of 1013 resultsSorted by popularity
-
Ring and Pinion Installation Kits
G2 GM 8.5 Inch Master Ring and Pinion Installation Kit – 35-2021
- Master kit with bearings for the GM 8.5-inch (10 bolt) axle, rear
- For use in 81-98 8.5-inch rear axles only
- Includes Timken pinion bearings and carrier bearings, shims, nut, seal and crush sleeve
- Gear marking compound, thread locking compound and silicone sealer
SKU: G/235-2021 -
Ring and Pinion Installation Kits
G2 Toyota 8 Inch 4 Cyl. Master Ring and Pinion Installation Kit – 35-2041
Ring and Pinion Installation KitsG2 Toyota 8 Inch 4 Cyl. Master Ring and Pinion Installation Kit – 35-2041
- Master kit with bearings for the Toyota 8-inch (4 cylinder) axle
- For use in 4 cylinder Toyota front and rear third members
- Includes Timken pinion bearings and carrier bearings, shims, nut, seal and crush sleeve
- Gear marking compound, thread locking compound and silicone sealer
SKU: G/235-2041 -
Ring and Pinion Installation Kits
G2 Chrysler 9.25 Inch Rear Master Ring and Pinion Installation Kit – 35-2028
Ring and Pinion Installation KitsG2 Chrysler 9.25 Inch Rear Master Ring and Pinion Installation Kit – 35-2028
- Master kit with bearings for the Chrysler 9.25-inch axle, rear
- Pinion and carrier bearings with shims, nut, seal and crush sleeve
- Includes Timken pinion bearings and carrier bearings, shims, nut, seal and crush sleeve
- Gear marking compound, thread locking compound and silicone sealer
SKU: G/235-2028 -
Ring and Pinion Installation Kits
G2 GM 8.6 Inch10 Bolt 09 and Up Master Ring and Pinion Installation Kit – 35-2022A
Ring and Pinion Installation KitsG2 GM 8.6 Inch10 Bolt 09 and Up Master Ring and Pinion Installation Kit – 35-2022A
- Master kit with bearings for the GM 10 bolt 8.6-inch axle, rear
- For use in 2009 and up 8.6-inch rear axles
- Includes Timken pinion bearings and carrier bearings, shims, nut, seal and crush sleeve
- Gear marking compound, thread locking compound and silicone sealer
SKU: G/235-2022A -
Ring and Pinion Installation Kits
G2 Ford 10.50 Inch Master Ring and Pinion Installation Kit – 35-2046A
Ring and Pinion Installation KitsG2 Ford 10.50 Inch Master Ring and Pinion Installation Kit – 35-2046A
- Master kit with bearings for the Ford 10.5-inch axle, rear
- For use in 1999-up Ford Sterling rear axles
- Includes Timken pinion bearings and carrier bearings, shims, nut, seal and crush sleeve
- Gear marking compound, thread locking compound and silicone sealer
SKU: G/235-2046A -
Replacement Axle Shafts
G2 Dana 30 JK Chromalloy Inner Axle Shaft – 97-2050-002
- Dana 30 JK passenger side inner axle shaft, 27 spline, 34.6 in overall length
- For 2007-2009 Jeep Wrangler (JK) front Dana 30, non Rubicon
- Chromoly; accepts 5-760X U-joint; machined for full circle clips
SKU: G/297-2050-002 -
Ring and Pinion Installation Kits
G2 Dana 30/Chrysler 8.25 XJ 4.10 Ring and Pinion Minor Installation Kit – 4-XJ6-410M
Ring and Pinion Installation KitsG2 Dana 30/Chrysler 8.25 XJ 4.10 Ring and Pinion Minor Installation Kit – 4-XJ6-410M
- Made for the 2000–2001 Jeep Cherokee XJ
- 4.10 ring and pinion gear sets, front and rear
- Dana 30 short front and Chrysler 8.25-inch rear axles
- Includes matched front and rear minor installation kits
- Limited lifetime warranty
SKU: G/24-XJ6-410M -
Ring and Pinion Installation Kits
G2 Dana 30/Chrysler 8.25 XJ 4.56 Ring and Pinion Minor Installation Kit – 4-XJ6-456M
Ring and Pinion Installation KitsG2 Dana 30/Chrysler 8.25 XJ 4.56 Ring and Pinion Minor Installation Kit – 4-XJ6-456M
- Fits the 2000–2001 Jeep Cherokee XJ
- 4.56 ring and pinion gear sets, front and rear
- Dana 30 short front and Chrysler 8.25-inch rear axles
- Includes matched front and rear minor installation kits
- Limited lifetime warranty
SKU: G/24-XJ6-456M -
-
Dana 44 Axle Shafts
G2 Dana 44 Chromalloy Outer Axle Shaft – 97-2033-001
- Outer axle shaft for Dana 44, 19 splines
- Driver and passenger side
- Overall length 9.72 inches
- Accepts a 5-760X U-joint, machined for full circle clips
- Made for Ford Dana 44 front axles, with year and model to confirm
SKU: G/297-2033-001 -
-
Dana 44 Axle Shafts
G2 Dana 44 YJ/XJ/TJ 30 Spline Rear Chromoly Axle Kit Disc – 96-2045-1-30
- G2 Dana 44 rear chromoly axle kit with disc brakes, part 96-2045-1-30
- Forged, heat-treated; 30 spline
- 5-lug dual drilled 5×4.5/5.5 flange
- Includes wheel bearings, seals and screw-in wheel studs
SKU: G/296-2045-1-30 -
Dana 44 Axle Shafts
G2 Dana 44 YJ/XJ/TJ 30 Spline Rear Chromoly Axle Kit – 96-2033-1-30
- Rear axle kit for Jeep YJ, XJ and TJ, 30 splines
- Dual drilled 5 x 4.5 and 5 x 5.5 bolt pattern
- Fits 1987–1995 YJ, 1987–2001 XJ and 1997–2006 TJ
- Not for disc brake applications
- Reuse factory retainer plates on 1989 and older
SKU: G/296-2033-1-30 -
Replacement Axle Shafts
G2 Dana 30 YJ/XJ/TJ 30 Spline Front Chromoly Axle Kit – 98-2031-002
- Dana 30 front chromoly axle kit, 30 spline, uses 5-760X joint
- For 1987-1995 Wrangler (YJ) with disconnect eliminator, 1997 and newer TJ, 1984-2001 XJ
- For use with a 30 spline aftermarket differential
SKU: G/298-2031-002 -
-
-
-
Ring and Pinion Installation Kits
G2 Dana 30/44 XJ 4.56 Ring and Pinion Minor Installation Kit – 4-XJ4-456M
Ring and Pinion Installation KitsG2 Dana 30/44 XJ 4.56 Ring and Pinion Minor Installation Kit – 4-XJ4-456M
- Fits the 1987–1990 Jeep Cherokee XJ with Dana 30 reverse front and Dana 44 rear axles
- 4.56 ring and pinion gear sets, front and rear
- Dana 30 reverse front and Dana 44 rear axles
- Includes matched front and rear minor installation kits
- Limited lifetime warranty
SKU: G/24-XJ4-456M -
Ring and Pinion Installation Kits
G2 Dana 30/44 YJ 4.56 Ring and Pinion Minor Installation Kit – 4-YJ2-456M
Ring and Pinion Installation KitsG2 Dana 30/44 YJ 4.56 Ring and Pinion Minor Installation Kit – 4-YJ2-456M
- Fits 1987–1995 Jeep Wrangler (YJ) with Dana 30 front and Dana 44 rear axles
- 4.56 ratio front and rear ring and pinion sets
- Includes front and rear matched minor installation kits
- Heat treated 8620 steel; limited lifetime warranty from G2
SKU: G/24-YJ2-456M -
-
Ring and Pinion Installation Kits
G2 Dana 30/44 TJ/LJ 4.56 Ring and Pinion Minor Installation Kit – 4-TJ2-456M
Ring and Pinion Installation KitsG2 Dana 30/44 TJ/LJ 4.56 Ring and Pinion Minor Installation Kit – 4-TJ2-456M
- Fits the 1997–2006 Jeep Wrangler TJ and LJ with Dana 30 front and Dana 44 rear axles
- 4.56 ring and pinion gear sets, front and rear
- Dana 30 front and Dana 44 rear axles
- Includes matched front and rear minor installation kits
- Limited lifetime warranty
SKU: G/24-TJ2-456M -
-
Replacement Axle Shafts
G2 Dana 35 YJ/XJ C-Clip 30 Spline Rear Chromoly Axle Kit – 96-2049-2-30
- Dana 35 C-clip rear chromoly axle kit, 30 spline, 5-lug dual drilled 5×4.5/5.5
- For 1991 and newer Jeep Wrangler (YJ), Cherokee (XJ) and Wrangler (TJ)
- Includes wheel bearings, seals and screw-in wheel studs; for use with a 30 spline differential
SKU: G/296-2049-2-30 -
-
Replacement Axle Shafts
G2 Dana 30 CJ Narrow 27 Spline Track Front Chromoly Axle Kit – 98-2032-001
- Front Dana 30 axle kit with 27 spline shafts, part number 98-2032-001
- Forged 4340 chromoly alloy with a 5-760X joint
- Fits 72-81 CJ narrow track applications
- Confirm fit for your model and year before ordering
SKU: G/298-2032-001 -
Dana 44 Axle Shafts
G2 Dana 44 JK 30 Spline Rear Chromoly Axle Kit – 96-2052-1-30
- Rear axle kit for 2007–2014 Jeep Wrangler JK non-Rubicon
- 30 splines, dual drilled 5 x 5 and 5 x 5.5 bolt pattern
- Includes wheel bearings, seals and screw-in wheel studs
- Does not include a differential
- Forged chromoly shafts, heat treated
SKU: G/296-2052-1-30 -
Ring and Pinion Installation Kits
G2 Dana 30/35 XJ 4.88 Ring and Pinion Minor Installation Kit – 4-XJ3-488M
Ring and Pinion Installation KitsG2 Dana 30/35 XJ 4.88 Ring and Pinion Minor Installation Kit – 4-XJ3-488M
- Fits the 1996–2001 Jeep Cherokee XJ
- 4.88 ring and pinion gear sets, front and rear
- Dana 30 short front and Dana 35 rear axles
- Includes matched front and rear minor installation kits
- Limited lifetime warranty
SKU: G/24-XJ3-488M -
Ring and Pinion Installation Kits
G2 Dana 30/35 TJ 4.88 Ring and Pinion Minor Installation Kit – 4-TJ-488M
Ring and Pinion Installation KitsG2 Dana 30/35 TJ 4.88 Ring and Pinion Minor Installation Kit – 4-TJ-488M
- Fits the 1997–2006 Jeep Wrangler TJ
- 4.88 ring and pinion gear sets, front and rear
- Dana 30 front and Dana 35 rear axles
- Includes matched front and rear minor installation kits
- Limited lifetime warranty
SKU: G/24-TJ-488M -
Ring and Pinion Installation Kits
G2 Dana 30/35 XJ 4.56 Ring and Pinion Minor Installation Kit – 4-XJ3-456M
Ring and Pinion Installation KitsG2 Dana 30/35 XJ 4.56 Ring and Pinion Minor Installation Kit – 4-XJ3-456M
- Fits the 1996–2001 Jeep Cherokee XJ.
- 4.56 ring and pinion gear sets, front and rear
- Dana 30 short front and Dana 35 rear axles
- Includes matched front and rear minor installation kits
- Limited lifetime warranty
SKU: G/24-XJ3-456M -
Ring and Pinion Installation Kits
G2 Dana 30/35 TJ 4.56 Ring and Pinion Minor Installation Kit – 4-TJ-456M
Ring and Pinion Installation KitsG2 Dana 30/35 TJ 4.56 Ring and Pinion Minor Installation Kit – 4-TJ-456M
- Fits the 1997–2006 Jeep Wrangler TJ.
- 4.56 ring and pinion gear sets, front and rear
- Dana 30 front and Dana 35 rear axles
- Includes matched front and rear minor installation kits
- Limited lifetime warranty
SKU: G/24-TJ-456M -
Ring and Pinion Installation Kits
G2 Dana 30/35 XJ 4.10 Ring and Pinion Minor Installation Kit – 4-XJ3-410M
Ring and Pinion Installation KitsG2 Dana 30/35 XJ 4.10 Ring and Pinion Minor Installation Kit – 4-XJ3-410M
- Fits the 1996–2001 Jeep Cherokee XJ
- 4.10 ring and pinion gear sets, front and rear
- Dana 30 short front and Dana 35 rear axles
- Includes matched front and rear minor installation kits
- Limited lifetime warranty
SKU: G/24-XJ3-410M -
Ring and Pinion Installation Kits
G2 Dana 30/35 TJ 4.10 Ring and Pinion Minor Installation Kit – 4-TJ-410M
Ring and Pinion Installation KitsG2 Dana 30/35 TJ 4.10 Ring and Pinion Minor Installation Kit – 4-TJ-410M
- Fits the 1997–2006 Jeep Wrangler TJ
- 4.10 ring and pinion gear sets, front and rear
- Dana 30 front and Dana 35 rear axles
- Includes matched front and rear minor installation kits
- Limited lifetime warranty
SKU: G/24-TJ-410M -
Dana 44 Axle Shafts
G2 Dana 44 JK 35 Spline Placer Gold Rear Chromoly Axle Kit – 196-2052-002
- G2 Placer Gold Dana 44 JK rear chromoly axle kit, part 196-2052-002
- Made in the U.S.A. from forged 4340 chromoly
- 35 spline for use with aftermarket lockers
- Includes wheel studs and wheel bearings
SKU: G/2196-2052-002 -
Ring and Pinion Installation Kits
G2 Dana 30/35 YJ 4.56 Ring and Pinion Minor Installation Kit – 4-YJ-456M
Ring and Pinion Installation KitsG2 Dana 30/35 YJ 4.56 Ring and Pinion Minor Installation Kit – 4-YJ-456M
- Fits the 1987–1995 Jeep Wrangler YJ
- 4.56 ring and pinion gear sets, front and rear
- Dana 30 front and Dana 35 rear axles
- Includes matched front and rear minor installation kits
- Limited lifetime warranty
SKU: G/24-YJ-456M -
Ring and Pinion Installation Kits
G2 Dana 30/35 XJ 4.56 Ring and Pinion Minor Installation Kit – 4-XJ-456M
Ring and Pinion Installation KitsG2 Dana 30/35 XJ 4.56 Ring and Pinion Minor Installation Kit – 4-XJ-456M
- Fits the 1984–2001 Jeep Cherokee XJ
- 4.56 ring and pinion gear sets, front and rear
- Dana 30 reverse front and Dana 35 rear axles
- Includes matched front and rear minor installation kits
- Limited lifetime warranty
SKU: G/24-XJ-456M -
Ring and Pinion Installation Kits
G2 Dana 30/35 XJ 4.10 Ring and Pinion Minor Installation Kit – 4-XJ2-410M
Ring and Pinion Installation KitsG2 Dana 30/35 XJ 4.10 Ring and Pinion Minor Installation Kit – 4-XJ2-410M
- Fits the 1990–1996 Jeep Cherokee XJ
- 4.10 ring and pinion gear sets, front and rear
- Dana 30 reverse front and Dana 35 rear axles
- Includes matched front and rear minor installation kits
- Limited lifetime warranty
SKU: G/24-XJ2-410M -
Ring and Pinion Installation Kits
G2 Dana 30/35 YJ 4.10 Ring and Pinion Minor Installation Kit – 4-YJ-410M
Ring and Pinion Installation KitsG2 Dana 30/35 YJ 4.10 Ring and Pinion Minor Installation Kit – 4-YJ-410M
- Fits the 1987–1995 Jeep Wrangler YJ (87-95 Wrangler YJ).
- 4.10 ring and pinion gear sets, front and rear
- Dana 30 front and Dana 35 rear axles
- Includes matched front and rear minor installation kits
- Limited lifetime warranty
SKU: G/24-YJ-410M -
Ring and Pinion Installation Kits
G2 Dana 30/35 XJ 4.10 Ring and Pinion Minor Installation Kit – 4-XJ-410M
Ring and Pinion Installation KitsG2 Dana 30/35 XJ 4.10 Ring and Pinion Minor Installation Kit – 4-XJ-410M
- Fits the 1984–2001 Jeep Cherokee XJ
- 4.10 ring and pinion gear sets, front and rear
- Dana 30 reverse front and Dana 35 rear axles
- Includes matched front and rear minor installation kits
- Limited lifetime warranty
SKU: G/24-XJ-410M -
Ring and Pinion Installation Kits
G2 Dana 30/35 XJ 4.56 Ring and Pinion Minor Installation Kit – 4-XJ2-456M
Ring and Pinion Installation KitsG2 Dana 30/35 XJ 4.56 Ring and Pinion Minor Installation Kit – 4-XJ2-456M
- Fits the 1990–1996 Jeep Cherokee XJ (90-96 XJ Cherokee).
- 4.56 ring and pinion gear sets, front and rear
- Dana 30 reverse front and Dana 35 rear axles
- Includes matched front and rear minor installation kits
- Limited lifetime warranty
SKU: G/24-XJ2-456M -
Dana 44 Axle Shafts
G2 Dana 44 JK Rubicon 32 Spline Placer Gold Rear Chromoly Axle Kit – 196-2052-032
Dana 44 Axle ShaftsG2 Dana 44 JK Rubicon 32 Spline Placer Gold Rear Chromoly Axle Kit – 196-2052-032
- G2 Placer Gold rear chromoly axle kit, part number 196-2052-032
- Forged 4340 chromoly steel with 32 splines
- Dual bolt pattern flange, 5 x 5 and 5 x 5.5
- Includes wheel studs and wheel bearings
- Made in the U.S.A., for the Jeep JK Rubicon Dana 44 rear
SKU: G/2196-2052-032 -
Ring and Pinion Installation Kits
G2 Dana 30/35 XJ 4.88 Ring and Pinion Minor Installation Kit – 4-XJ2-488M
Ring and Pinion Installation KitsG2 Dana 30/35 XJ 4.88 Ring and Pinion Minor Installation Kit – 4-XJ2-488M
- Fits the 1990–1996 Jeep Cherokee XJ
- 4.88 ring and pinion gear sets, front and rear
- Dana 30 reverse front and Dana 35 rear axles
- Includes matched front and rear minor installation kits
- Limited lifetime warranty
SKU: G/24-XJ2-488M -
Ring and Pinion Installation Kits
G2 Dana 30/35 YJ 4.88 Ring and Pinion Minor Installation Kit – 4-YJ-488M
Ring and Pinion Installation KitsG2 Dana 30/35 YJ 4.88 Ring and Pinion Minor Installation Kit – 4-YJ-488M
- Fits the 1987–1995 Jeep Wrangler YJ
- 4.88 ring and pinion gear sets, front and rear
- Dana 30 front and Dana 35 rear axles
- Includes matched front and rear minor installation kits
- Limited lifetime warranty
SKU: G/24-YJ-488M -
Replacement Axle Shafts
G2 Dana 30 JK 27 Spline Front Chromoly Axle Kit – 98-2050-001
- Front Dana 30 axle kit with 27 spline shafts, part number 98-2050-001
- Chromoly alloy shafts forged from 4340 alloy
- Fits non Rubicon 2007-2009 Jeep Wrangler JK models
- Does not include a differential
SKU: G/298-2050-001 -
Ring and Pinion Installation Kits
G2 Dana 30 JK Master Ring and Pinion Installation Kit – 35-2050
- Master kit with bearings for the Dana 30 (Jeep JK front) axle, front
- For use in Jeep JK Dana 30 front only
- Includes Timken pinion bearings and carrier bearings, shims, nut, seal and crush sleeve
- Gear marking compound, thread locking compound and silicone sealer
SKU: G/235-2050 -
Ring and Pinions
G2 Dana 30 JK Front Reverse 4.56 Ratio Ring and Pinion – 2-2050-456R
- G2 Axle and Gear 2-2050-456R front reverse Dana 30 ring and pinion, 4.56 ratio
- For the front Dana 30 axle of 2007–2018 Jeep Wrangler JK
- Computer heat treated 8620 steel, double shot peened and double lapped
- For use with a 3.73 and up carrier
SKU: G/22-2050-456R -
Dana 44 Axle Shafts
G2 Dana 44 Chromalloy Inner Axle Shaft – 97-2045-001
- Driver side front inner shaft, 30 splines
- Overall length 16.62 inches, machined for full circle clips
- Accepts a 5-760 U-joint
- Built for 2003–2006 Jeep Dana 44 axles with the Rubicon option
- Forged alloy steel, heat treated
SKU: G/297-2045-001











