Overview
The G2 Axle and Gear 2-2049-411 is a 4.11 ratio ring and pinion gear set for a rear Dana 35 axle. It is made for use with a 3.54 and up carrier.
G2 says its ring and pinion sets are engineered for demanding applications, and are designed to hold up to oversized tires and high performance engines. The set is manufactured to O.E. specifications from computer heat treated 8620 steel, and it is double shot peened and double lapped.
Key features
- 4.11 gear ratio
- Computer heat treated 8620 steel
- Double shot peened
- Double lapped
- Manufactured to O.E. specifications
- 10 year warranty
Rear axle gear care
A rear Dana 35 carries the drive load to the wheels, and the ring and pinion is the point where that load is multiplied. A 4.11 ratio lifts pulling force for heavier tires and slower trail work, and it also raises engine speed on the highway, so the gear choice should match how the vehicle is driven most often.
The carrier and axle housing decide whether this set can be used, so measure and identify both before buying. Replacing the carrier bearings and pinion bearings together keeps the gear pattern stable. Shims and the pinion depth should be recorded during removal so the new setup can be matched.
After installation, watch for warm axle housings, whining under load and oil seepage around the cover. Gear oil should be changed after the early break-in miles, and fresh fluid helps keep the teeth protected under heavy use.
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2049-411 |
| UPC | 631410094527 |
| Axle location | Rear |
| Axle type | Dana 35 |
| Gear ratio | 4.11 |
| Carrier requirement | 3.54 and up carrier |
| Material | Computer heat treated 8620 steel |
| Warranty | 10 years |
Vehicle fitment
The set is made for a rear Dana 35 axle. Confirm the axle model and carrier before ordering.
A ring and pinion is only one part of the gear job, so check the carrier and axle model first.
Installation notes
A ring and pinion set needs professional setup and a break-in period, so have a shop set the pattern and backlash.
What’s included
The ring and pinion gear set, sold as one item.
Not included: the differential carrier, which must be a 3.54 and up carrier.























