G2 Axle and Gear
Showing 721–768 of 1013 resultsSorted by popularity
-
Ring and Pinions
G2 Dana 70 4.56 Ratio Ring and Pinion – 2-2035-456
- G2 Axle and Gear 4.56 ratio ring and pinion for the Dana 70 rear axle, part 2-2035-456
- For use with 4.56 and up carriers
- Computer heat treated 8620 steel, double shot peened, double lapped
- Check with the vehicle manufacturer for proper fitment
SKU: G/22-2035-456 -
Ring and Pinions
G2 Ford 10.25 Inch Long 4.88 Ratio Ring and Pinion – 2-2046-488L
- G2 Axle and Gear 4.88 ratio long ring and pinion for the Ford 10.25 inch rear axle, part 2-2046-488L
- Works with all ratio carriers
- Fits the Ford 10.5 inch housing with the 35-2046 Master Kit
- Computer heat treated 8620 steel, double shot peened, double lapped
SKU: G/22-2046-488L -
Ring and Pinions
G2 Chrysler 8.25 Inch 4.10 Ratio Ring and Pinion – 2-2029-410
- G2 Axle and Gear 4.10 ratio ring and pinion for the Chrysler 8.25 inch rear axle, part 2-2029-410
- For use on 2.56 and up carriers
- Computer heat treated 8620 steel, double shot peened, double lapped
- 10 year warranty from G2
SKU: G/22-2029-410 -
Ring and Pinions
G2 GM 9.5 Inch 14 Bolt 4.10 Ratio Ring and Pinion – 2-2010-410
- G2 Axle and Gear 4.10 ratio ring and pinion for the GM 14 bolt 9.5 inch rear axle, part 2-2010-410
- For use with all ratio carriers
- Computer heat treated 8620 steel, double shot peened, double lapped
- 10 year warranty from G2
SKU: G/22-2010-410 -
-
Ring and Pinions
G2 Toyota FJ Cruiser IFS 4.88 Ratio Ring and Pinion – 2-2057-488
- G2 Toyota FJ Cruiser IFS ring and pinion, part number 2-2057-488
- 4.88 gear ratio for the front axle
- Requires a 3.90 and up carrier
- Computer heat treated 8620 steel, double shot peened and double lapped
SKU: G/22-2057-488 -
Ring and Pinions
G2 GM 10.5 Inch 14 Bolt 4.56 Ratio Ring and Pinion – 2-2023-456
- G2 Axle and Gear 4.56 ratio ring and pinion for the GM 14 bolt 10.5 inch rear axle, part 2-2023-456
- For use with 4.56 and up carriers
- Not for use with a 4.10 carrier
- Computer heat treated 8620 steel, double shot peened, double lapped
- 10 year warranty from G2
SKU: G/22-2023-456 -
-
Ring and Pinions
G2 GM 9.25 Inch IFS 4.10 Ratio Ring and Pinion – 2-2096-410
- G2 Axle and Gear 4.10 ratio ring and pinion for the GM 9.25 inch IFS front axle, part 2-2096-410
- Works with all ratio carriers
- Computer heat treated 8620 steel, double shot peened, double lapped
- 10 year warranty from G2
SKU: G/22-2096-410 -
Ring and Pinions
G2 Toyota FJ Cruiser IFS 4.56 Thick Ring and Pinion – 2-2057-456X
- G2 Axle and Gear 4.56 thick ring and pinion for the Toyota FJ Cruiser IFS front axle, part 2-2057-456X
- For use with 3.73 and down carriers
- Computer heat treated 8620 steel, double shot peened, double lapped
- 10 year warranty from G2
SKU: G/22-2057-456X -
Ring and Pinions
G2 GM 10.5 Inch 14 Bolt Thick 4.56 Ratio Ring and Pinion – 2-2023-456X
- G2 Axle and Gear 4.56 ratio thick ring and pinion for the GM 14 bolt 10.5 inch rear axle, part 2-2023-456X
- For use with 4.10 and down carriers
- Computer heat treated 8620 steel, double shot peened, double lapped
- 10 year warranty from G2
SKU: G/22-2023-456X -
Ring and Pinions
G2 Dana 80 3.54 Ratio Ring and Pinion – 2-2080-354
- G2 Axle and Gear 3.54 ratio ring and pinion for the Dana 80 rear axle, part 2-2080-354
- For use with 3.73 and down carriers
- Computer heat treated 8620 steel, double shot peened, double lapped
- Check with the vehicle manufacturer for proper fitment
SKU: G/22-2080-354 -
Ring and Pinions
G2 Toyota Tacoma Front Reverse 7.5 Inch 4.88 Ratio Ring and Pinion – 2-2055-488
- G2 Axle and Gear 4.88 ratio front reverse ring and pinion for the Toyota Tacoma 7.5 inch front axle, part 2-2055-488
- For use with 3.54 and up carriers
- Computer heat treated 8620 steel, double shot peened, double lapped
- 10 year warranty from G2
SKU: G/22-2055-488 -
Ring and Pinions
G2 GM 10.5 Inch 14 Bolt Thick 5.13 Ratio Ring and Pinion – 2-2023-513X
- G2 Axle and Gear 5.13 ratio thick ring and pinion for the GM 14 bolt 10.5 inch rear axle, part 2-2023-513X
- For use with 4.10 and down carriers
- Computer heat treated 8620 steel, double shot peened, double lapped
- 10 year warranty from G2
SKU: G/22-2023-513X -
Ring and Pinions
G2 GM 10.5 Inch 14 Bolt Thick 4.88 Ratio Ring and Pinion – 2-2023-488X
- G2 Axle and Gear 4.88 ratio thick ring and pinion for the GM 14 bolt 10.5 inch rear axle, part 2-2023-488X
- For use with 4.10 and down carriers
- Computer heat treated 8620 steel, double shot peened, double lapped
- 10 year warranty from G2
SKU: G/22-2023-488X -
Ring and Pinion Installation Kits
G2 Dana 80 Master Ring and Pinion Installation Kit – 35-2080
- Master kit with bearings for the Dana 80 axle
- Not for use in 1999 up Ford Super Duty dually
- Includes Timken pinion bearings and carrier bearings, shims, nut, seal and crush sleeve
- Gear marking compound, thread locking compound and silicone sealer
SKU: G/235-2080 -
Ring and Pinion Installation Kits
G2 GM 8.5 Inch Front Master Ring and Pinion Installation Kit – 35-2021F
Ring and Pinion Installation KitsG2 GM 8.5 Inch Front Master Ring and Pinion Installation Kit – 35-2021F
- Master kit with bearings for the GM 8.5-inch (10 bolt) axle, front
- For use in 77-91 8.5-inch front axles only
- Includes Timken pinion bearings and carrier bearings, shims, nut, seal and crush sleeve
- Gear marking compound, thread locking compound and silicone sealer
SKU: G/235-2021F -
Ring and Pinion Installation Kits
G2 Ford 9.75 Inch 2000 Later Master Ring and Pinion Installation Kit – 35-2012A
Ring and Pinion Installation KitsG2 Ford 9.75 Inch 2000 Later Master Ring and Pinion Installation Kit – 35-2012A
- Master kit with bearings for the Ford 9.75-inch axle, rear
- For use in 2000 and newer axles only
- Includes Timken pinion bearings and carrier bearings, shims, nut, seal and crush sleeve
- Gear marking compound, thread locking compound and silicone sealer
SKU: G/235-2012A -
Ring and Pinions
G2 GM 8.5 Inch 10 Bolt 4.10 O.E.M. Ratio Ring and Pinion – 1-2021-410
- G2 Axle and Gear 4.10 O.E.M. ratio ring and pinion for GM 10 bolt 8.5 inch and 8.6 inch axles, part 1-2021-410
- Front and rear locations
- For use with 2.73 and up carriers
- Works in the 8.6 inch housing with the 35-2022 Master Kit
SKU: G/21-2021-410 -
Locking Hubs
G2 G2 Dana 60 35 Spline Extreme Hubs (Polished Aluminum) – 89-2034-3
- Locking hubs for aftermarket 35 spline shafts on most Dana 60 and 61 axles
- Nodular iron body and heat treated steel locking ring
- Polished aluminum finish with alloy dial
- G2 Axle and Gear part number 89-2034-3
SKU: G/289-2034-3 -
Ring and Pinion Installation Kits
G2 Dana 44 JK Rubicon Rear Master Ring and Pinion Installation Kit – 35-2052
Ring and Pinion Installation KitsG2 Dana 44 JK Rubicon Rear Master Ring and Pinion Installation Kit – 35-2052
- Master ring and pinion installation kit for the rear Dana 44 on Jeep JK Rubicon, part number 35-2052
- Includes Timken pinion bearings and carrier bearings with races
- Made for JK Rubicon rears with a factory locker
- Covers Wrangler JK, 2007–2018
SKU: G/235-2052 -
Ring and Pinions
G2 GM 11.5 Inch AAM 14 Bolt 4.88 Ratio Ring and Pinion – 2-2024-488
- G2 Axle and Gear 4.88 ratio ring and pinion for the 11.5 inch AAM rear axle, part 2-2024-488
- Fits the Chrysler 11.5 inch housing
- Works with all ratio carriers
- Computer heat treated 8620 steel, double shot peened, double lapped
SKU: G/22-2024-488 -
Ring and Pinions
G2 GM 9.25 Inch IFS 4.10 O.E.M. Ratio Ring and Pinion – 1-2096-410
- G2 Axle and Gear 4.10 O.E.M. ratio ring and pinion for the GM 9.25 inch IFS front axle, part 1-2096-410
- Works with all ratio carriers
- Designed to run cooler and quieter than aftermarket gears
- Computer heat treated 8620 steel, double shot peened, double lapped
SKU: G/21-2096-410 -
Ring and Pinion Installation Kits
G2 Toyota 7.5 Inch Tacoma Front Master Ring and Pinion Installation Kit – 35-2055
Ring and Pinion Installation KitsG2 Toyota 7.5 Inch Tacoma Front Master Ring and Pinion Installation Kit – 35-2055
- Master kit with bearings for the Toyota 7.5-inch IFS (Tacoma) axle, front
- For use in Toyota 7.5-inch IFS non clam shell front axle
- Includes Timken pinion bearings and carrier bearings, shims, nut, seal and crush sleeve
- Gear marking compound, thread locking compound and silicone sealer
SKU: G/235-2055 -
Ring and Pinion Installation Kits
G2 GM 12 Bolt Truck Master Ring and Pinion Installation Kit – 35-2018
Ring and Pinion Installation KitsG2 GM 12 Bolt Truck Master Ring and Pinion Installation Kit – 35-2018
- Master kit with bearings for the GM 12 bolt truck, 8.875-inch axle, rear
- Pinion and carrier bearings with shims, nut, seal and crush sleeve
- Includes Timken pinion bearings and carrier bearings, shims, nut, seal and crush sleeve
- Gear marking compound, thread locking compound and silicone sealer
SKU: G/235-2018 -
Ring and Pinions
G2 Dana 30 XJ/YJ Front Reverse 4.88 Ratio Ring and Pinion – 2-2032-488R
- G2 Axle and Gear 4.88 ratio front reverse ring and pinion, part 2-2032-488R
- Jeep XJ Cherokee (1984-1999) and YJ Wrangler (1987-1995) front axles
- For use with 3.73 and up carriers
- Computer heat treated 8620 steel, double shot peened, double lapped
SKU: G/22-2032-488R -
Ring and Pinions
G2 Dana 30 Standard 3.73 Ratio Ring and Pinion – 2-2032-373
- G2 Axle and Gear 3.73 ratio ring and pinion for the Dana 30 standard front axle, part 2-2032-373
- For use with 3.73 and up carriers
- Computer heat treated 8620 steel, double shot peened, double lapped
- Manufactured to O.E. specifications with a 10 year warranty
SKU: G/22-2032-373 -
Ring and Pinion Installation Kits
G2 Ford 9 Inch 3.25 Inch Bore With Daytona Pinion Master Ring and Pinion Installation Kit – 35-2011C
Ring and Pinion Installation KitsG2 Ford 9 Inch 3.25 Inch Bore With Daytona Pinion Master Ring and Pinion Installation Kit – 35-2011C
- Master kit with bearings for the Ford 9-inch, 3.25-inch bore axle, rear
- For use with aftermarket 3.25-inch bore case
- Includes Timken pinion bearings and carrier bearings, shims, nut, seal and crush sleeve
- Gear marking compound, thread locking compound and silicone sealer
SKU: G/235-2011C -
-
-
Ring and Pinions
G2 Ford 8.8 Inch Front Reverse 4.88 Ratio Ring and Pinion – 2-2088-488
- G2 Axle and Gear 4.88 ratio front reverse ring and pinion, part 2-2088-488
- Made for the Ford 8.8 inch front axle
- Works with all ratio carriers
- Computer heat treated 8620 steel, double shot peened, double lapped
- 10 year warranty from G2
SKU: G/22-2088-488 -
Ring and Pinions
G2 GM 8.5 Inch 10 Bolt 4.10 Ratio Ring and Pinion – 2-2021-410
- G2 Axle and Gear 4.10 ratio ring and pinion, part 2-2021-410
- Front and rear locations for GM 10 bolt 8.5 inch and 8.6 inch axles
- For use with 2.73 and up carriers; the 8.6 inch version works with the 35-2022 Master Kit
- Computer heat treated 8620 steel, double shot peened, double lapped
- 10 year warranty from G2
SKU: G/22-2021-410 -
-
Ring and Pinion Installation Kits
G2 Dana 44 JK Non Rubicon Rear Master Ring and Pinion Installation Kit – 35-2053
Ring and Pinion Installation KitsG2 Dana 44 JK Non Rubicon Rear Master Ring and Pinion Installation Kit – 35-2053
- Master ring and pinion installation kit for the rear Dana 44 on non-Rubicon Jeep Wrangler JK, part number 35-2053
- Includes Timken pinion bearings and races, and carrier bearings and races
- Pinion nut, pinion seal, crush sleeve, shims and ring gear bolts included
- Wrangler JK, 2007-2018, non-Rubicon rear Dana 44
SKU: G/235-2053 -
-
-
-
-
Ring and Pinion Installation Kits
G2 GM 8.5 Inch Big Bearing Master Ring and Pinion Installation Kit – 35-2021L
Ring and Pinion Installation KitsG2 GM 8.5 Inch Big Bearing Master Ring and Pinion Installation Kit – 35-2021L
- Master kit with bearings for the GM 8.5-inch big bearing (10 bolt) axle, rear
- For use in 81-98 8.5-inch rear axles with big bearing 8.6-inch differential carrier only
- Includes Timken pinion bearings and carrier bearings, shims, nut, seal and crush sleeve
- Gear marking compound, thread locking compound and silicone sealer
SKU: G/235-2021L -
-



































