Select your vehicle

Lighting & Lighting Accessories

This is the top-level lighting category, covering off-road light bars and pods, fog and driving lights, replacement headlights, tail lights, marker lamps, bulbs, wiring, switches and mounting hardware. It suits anyone upgrading trail visibility or repairing worn-out lamps. Brands include Rigid Industries, Hella, KC HiLites and Rugged Ridge. Open a product page for part numbers and features, then compare the products below.

Pro Comp 20-inch double row LED combo spot/flood light bar

Good lighting decides how late you can stay on the trail and how safely you get home. This section spans light bars, pods and driving lamps for the dark miles, plus the headlights, tail lamps, bulbs, switches and brackets that keep a rig legal and working on the street.

Think of it in three layers. The lamps themselves come first: auxiliary LED bars and pods, or factory-style replacements. Next is power: relays, harnesses, switches and resistors that feed them safely. Last is mounting and protection: bumper, cowl and rack brackets, bezels and lens covers. Sort out all three before you drill a hole, because a great light on a weak bracket or thin wire will not last.

2,458Parts listed
40Part types
74Brands
752Rigid Industries parts
IP67 / IP68Common sealing ratings
12 VStandard system voltage

Shop lighting by type

More part types (24)

Popular lights and lighting parts

Lighting reference: sizes, bulbs and wiring

Quick numbers to have on hand when you plan a lighting upgrade or replace a lamp. Always confirm the exact bulb, hole size and connector against the product page and your vehicle.

IP sealing ratings

IP65Dust tight, protected from water jets
IP66Dust tight, protected from powerful jets
IP67Dust tight, temporary immersion to 1 m
IP68Dust tight, immersion beyond 1 m (maker's spec)
IP69KDust tight, high-pressure hot washdown

Standard headlight sizes

  • 7-inch round: the classic single-lamp size used by many Jeeps and older trucks
  • 5-3/4-inch round: four-lamp layouts on older trucks and SUVs
  • 4 x 6-inch rectangular: quad-lamp layouts, high and low beams separate
  • 5 x 7-inch rectangular: single-lamp layouts on many trucks and SUVs
  • Composite or projector housings: vehicle-specific, ordered by year and side

Measure before you order

  • Cutout size for flush-mount lamps (a 4" round tail lamp needs a 4-1/2" hole)
  • Light bar length, end to end including side brackets, against the mount or bumper opening
  • Bulb designation printed on the base of the old bulb
  • Connector type on the harness (Deutsch DT, factory plug or bare leads)
  • LED turn signals on older flashers may need load resistors to stop fast flashing
  • Tab spacing and tube diameter for clamp-on rack and bar mounts

Common bulb designations

9005 (HB3)Single filament, usually high beam
9006 (HB4)Single filament, usually low beam
H4 (9003 / HB2)Dual filament, high and low in one bulb
H13 (9008)Dual filament, high and low in one bulb
H11Single filament, common in fog and low beams
1156 / 1157Bayonet-base tail, turn and backup bulbs

Power draw at 12 volts

Rule of thumbAmps = watts ÷ 12
Pair of 55 W halogen lampsAbout 9 A
60 W LED loadAbout 5 A
120 W LED loadAbout 10 A
240 W LED loadAbout 20 A
Fuse sizingAbove normal draw, within the wire's rating

Relay terminals (ISO mini relay)

30Fused battery feed
87Output to the lights
86Switch trigger (coil positive)
85Ground (coil negative)
87aNormally closed output, on 5-pin relays

Rules on aux lights, colors and covers differ by state. Look for DOT or SAE markings on any lamp you plan to use on public roads.

All Lighting & Lighting Accessories 2,467 parts

Showing 1–12 of 2467 resultsSorted by popularity

What this category covers

Lighting for a 4x4 falls into two broad groups. The first is auxiliary lighting added to the vehicle: light bars, pod lights, fog and driving lamps, work lamps and rock lights. The second is replacement and repair lighting: headlights, tail and brake lights, side markers, bulbs, bezels and sockets that restore factory function. The subcategories here separate these so you can go straight to the type you need.

Choosing auxiliary lights

Start with what the light needs to do. Driving lights throw a longer, narrower beam for high-speed visibility on dirt roads. Fog lights spread low and wide to cut under dust and mist. Flood or work lamps light the area around the vehicle for camp and recovery tasks. Light bars combine these roles depending on optics, and many offer combination or hybrid beam patterns.

  • Beam pattern: spot for distance, flood for width, combo for general use.
  • Housing and sealing: look for an ingress protection rating suited to water crossings and pressure washing.
  • Lens material: polycarbonate resists rock strikes better than glass but can scratch.
  • Power draw: confirm the lamp's amperage against your wiring and alternator capacity.

Replacement lamps and bulbs

For factory-style repair, match the lamp to the exact year, make, model and side of the vehicle. Bulb type matters: halogen, HID and LED units are not always interchangeable in the same housing, and a poorly matched LED can scatter light and blind oncoming drivers. Check the bulb designation on the old unit or in the owner's manual before ordering.

Wiring and installation

Auxiliary lights should be wired through a relay with a correctly rated fuse, not straight from a switch. Use wire gauge appropriate for the current and length of run, seal connectors against moisture, and mount lights solidly so vibration does not loosen them. Accessory brackets and cradles are sold separately for many light bars, so confirm what is included in a given kit.

Legal and compatibility notes

Rules on auxiliary lighting vary by state. Many jurisdictions restrict forward-facing lights on public roads, require covers when not off-road, or limit color. Check your local regulations. Confirm fitment for your exact vehicle and review the manufacturer's specifications before installing.

A few habits make lighting upgrades last. Keep a short list of the bulb types and lamp part numbers on your vehicle, because side markers, headlights and tail lights often differ between model years and trims. When mounting auxiliary lights, aim them after installation on level ground at a wall or garage door, so the beam lands where you intend rather than into the eyes of other drivers. Inspect wiring for chafing after rough trips, and dab dielectric grease on connectors to resist corrosion. Replacement lenses and covers are sold for many popular lamps, so a cracked lens does not always mean a new light. Finally, think about total electrical load: several high-output lamps running at once can strain a stock alternator, particularly with a winch or fridge on the same system. Keep spare fuses and a small supply of weatherproof connectors in the vehicle, since a blown fuse is the most common reason a light stops working on the trail.

Popular Lighting & Lighting Accessories brands

Lighting & Lighting Accessories FAQ

What is the difference between driving lights and fog lights?

Driving lights produce a longer, tighter beam to extend your reach at speed. Fog lights produce a wide, flat beam mounted low to reduce glare off dust, rain or snow. They solve different problems, and many vehicles carry both.

Do I need a relay to install a light bar?

Yes, in most cases. A relay lets a small switch control a high-current circuit, and an inline fuse near the battery protects the wiring. Follow the lamp maker's wiring diagram and use wire sized for the current draw.

Can I replace halogen bulbs with LED bulbs?

Sometimes, but the housing was designed around a halogen filament. LED retrofit bulbs can produce poor beam patterns or glare in reflector housings. Check that the product is intended for your vehicle and review local lighting regulations.

Are off-road lights legal to use on the street?

Rules vary by state and usually restrict how auxiliary lights may be mounted, wired and used on public roads. Many require covers or separate switching. Check your local regulations before driving with them on.