Overview
The G2 Axle and Gear 93-50-200HC is a black anodized aluminum wheel spacer, 2 inch thick, built for a 5 on 150 bolt pattern. A spacer mounts between the hub and the wheel and pushes the wheel outward, which changes track width and the space between the tire and nearby suspension or brake parts. The stated specs add a 110mm centerbore and 14×1.5 wheel studs, the two measurements that decide whether it seats correctly on a hub.
The spacers are sold in pairs, and each one has 14×1.5 wheel studs, lug nuts and thread locker compound already fitted. The part is universal fit and names no make, model, year or trim, so the bolt pattern, centerbore and stud size decide whether it fits.
Key features
- 5 on 150 bolt pattern
- 2 inch thick spacer that moves the wheel outward
- 110mm centerbore
- 14×1.5 wheel studs
- Black anodized aluminum finish
- Studs, lug nuts and thread locker compound come installed
- Sold in pairs
Centerbore and hub fit
The centerbore is the hole in the spacer that fits over the hub, and it should match the hub closely. When the centerbore fits the hub snugly, the hub carries the wheel’s centering load and the lug studs mainly clamp the assembly, which reduces vibration. A spacer with a centerbore that is too large relies on the studs for centering, and that can cause wobble and uneven wear. Inspect the threads on the studs and the seating faces of the spacer and wheel before mounting, and remove any rust or debris. Longer studs are often needed when a spacer is added, so confirm that the studs engage the nut fully without bottoming out. Mixing spacers from different sets or using loose hardware is a common cause of trouble, so keep each spacer with its own studs and nuts.
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 93-50-200HC |
| UPC | 631410129908 |
| Type | Spacer |
| Bolt pattern | 5 on 150 |
| Thickness | 2 inch |
| Centerbore | 110mm |
| Wheel studs | 14×1.5 |
| Material | Aluminum |
| Finish | Black anodized |
| Included | Pre-installed wheel studs, lug nuts and thread locker compound |
| Quantity | Sold in pairs |
Vehicle fitment
No make, model or year is named for this spacer. Because it is universal fit, the mounting dimensions decide the match: the 5 on 150 bolt pattern, the 110mm centerbore and the 14×1.5 studs must all suit your hub and wheels.
Confirm your vehicle’s year, model and trim before ordering. A spacer with a different bolt pattern or centerbore will not seat correctly, even if it looks similar.
Installation notes
The studs and lug nuts are already attached, so the spacer and its hardware install as one unit. Check clearance at full steering lock and at full suspension compression before driving, because the wheel now sits farther from the hub.
What’s included
Two 2 inch aluminum spacers, each with 14×1.5 studs, lug nuts and thread locker compound in place.
Not included: wheels and tires.












