Transmission Parts
Transmission parts for Jeeps and other 4x4s, from mounts, crossmembers and drop brackets to deep-sump pans, adapters, gaskets, gears and shifter parts. Subcategories cover manual and automatic transmissions. Brands include Crown Automotive, Omix-Ada, Mag-Hytec, Pro Comp Suspension and Advance Adapters. Open a product page to compare part numbers and fitment, then compare the products below.

The transmission takes every gear change and every low-range crawl, and off-road use loads it with heat, angle and shock. This section covers the parts around and inside it: mounts, drop brackets, crossmembers, deep pans, transfer case adapters and the small manual gearbox parts that keep a shifter tight.
Parts here split three ways. Manual transmission parts are the largest group: bearings, seals, synchronizer parts, shift boots, bezels and bushings for Jeep gearboxes such as the AX5, AX15, NV3550, T5 and T15. Automatic parts are mostly pans, including deep sump designs. Mounts, drop brackets, crossmembers, torque arm bushings and adapters handle how the transmission sits and what it bolts to. Most listings name one transmission model, so match that first.
Shop transmission parts by type
Popular transmission parts
-
Manual Trans Shift Bezel
Rugged Ridge Manual Transmission Shifter Bezel – 11422.12
- Rugged Ridge manual transmission shifter bezel in CNC machined billet aluminum
- Fits 2007–2010 Jeep Wrangler (JK) models, 2-door and 4-door
- Replaces factory components with no drilling or modification
- Part number 11422.12, UPC 804314237837
SKU: RUG11422.12 -
Manual Trans Input Shaft Bearing
Crown Automotive AX15 Main Drive Gear Bearing – 83506074
- Crown Automotive AX15 main drive gear bearing, part 83506074
- Front position, direct fit replacement
- Fitment list: 1989 to 1999 Cherokee XJ, 1993 Grand Cherokee ZJ, 1997 Wrangler TJ Sport, 1988 to 1995 Wrangler YJ
- UPC 848399026658
SKU: CRO83506074 -
-
-
-
-
-
Transmission Mount
Energy Suspension Transmission Mount – 3.1108R
- Energy Suspension 3.1108R red zinc-finished adapter mount
- Bolts to the NV3550 transmission and keeps the stock Peugeot muffler support and rubber mount
- Fits Chevrolet and GMC trucks, Blazer, Jimmy and Sonoma models, 1965 to 2001, plus Jeep Wrangler YJ
- Part number 3.1108R, UPC 703639276616
SKU: ENE3.1108R
Transmission parts reference
Figures below come from the listed products. Use them to compare options, then check the product page for your exact application.
Deep sump pans in this section
| Added capacity | Overall height | |
|---|---|---|
| Ford E40D / 4R100 | 7 2/3 qt over stock | 6 1/8" |
| Dodge 727 extra deep | 4 qt over stock | 5 7/8" |
| GM 4L60E | 3 1/3 qt over stock | 4 1/4" |
| Dodge 68RFE | 2.5 qt over stock | 4 5/8" |
| Ford 6.7L automatic, 2011–2017 | 5.5 qt over stock | 4 1/4" |
| Allison A1000 | 10.5 qt total capacity | 5 1/2" |
Mount materials compared
| Stock rubber | Polyurethane | |
|---|---|---|
| Vibration at the cab | Lowest | More, especially at idle |
| Drivetrain movement | More, can let the shifter wander | Less, holds the driveline steady |
| Wear and fluids | Softens and tears with age and oil | Resists oil and wear |
| Best fit | Daily driving, factory feel | Hard trail use, lifted rigs |
After a lift, check these
- Rear driveshaft angle at the transfer case output
- Vibration at highway speed that was not there before
- Crossmember and mount condition before adding a drop bracket
- Clearance between pan, exhaust and crossmember after a drop
- Shift linkage and transfer case linkage travel
- Ground clearance lost under the crossmember
Transfer case adapters listed
| GM TH400 to Dana 20 | 1972–1979 CJ5, CJ6 and CJ7 |
|---|---|
| GM 700R4 (2WD) to Dana 300 | May need an adapter crossmember kit |
| GM TH350 to Dana 300 or NP231 | NP231 with 23 spline input |
| GM TH350 (4WD) to NP231 | NP231 with 21 spline input |
Common Jeep manual transmissions
- AX5: Aisin 5-speed, mostly behind 4-cylinder Wrangler and Cherokee engines
- AX15: Aisin 5-speed, behind the 4.0L six in Wrangler and Cherokee through 1999
- NV3550: New Venture 5-speed that replaced the AX15 in Wrangler and Cherokee
- T4 and T5: Borg-Warner 4- and 5-speeds in 1980s CJ models
- T14 and T15: Borg-Warner 3-speeds in older CJ and full-size Jeeps
- SR4: Borg-Warner 4-speed in late CJ models
Pan, filter and gasket fitment depends on the exact transmission model and sometimes the filter style. Read the tag or pan shape before ordering, and check clearance with extra deep pans.
All Transmission Parts 278 parts
-
Manual Trans Shift Lever Kit
Skyjacker Rock Ready Shifter Bracket – JSRB231A
- Skyjacker Rock Ready shifter bracket relocates the 4WD shifter for transfer case drops
- Part number JSRB231A
- One-piece steel spacer, 1 inch lift height, welding required
- Works with manual or automatic transmissions; AX15 needs modification
SKU: SKYJSRB231A -
-
-
-
-
-
-
-
What you can find here
This category spans the hardware around a transmission as well as the parts inside it. External items include transmission mounts, crossmembers, drop brackets and torque arm bushings. Service items include gaskets, pans, shift cover seals, shift knobs and boots. Internal parts for manual gearboxes such as the AX15 and T14 include gears, synchronizer hubs and blocking rings, and adapters let a transmission connect to a transfer case or different engine.
Mounts, crossmembers and lift-related parts
A worn mount lets the transmission move and can cause clunks, vibration and driveline strain. After a lift, drivetrain angles change, and drop brackets or a modified crossmember lower the transmission to restore transfer case and driveshaft angles. Polyurethane mounts such as Prothane parts resist wear but are firmer than rubber, which can raise noise and vibration.
Deep pans and fluid
A deep-sump pan holds more fluid and adds cooling capacity, which can help when towing, running large tires or climbing at low speeds. Listings name specific automatics, such as the 42RE, 68RFE, 727, 4L60E and E40D/4R100, so match the transmission model exactly. Change fluid with the type specified by the manufacturer, since mixing or using the wrong fluid can damage clutches, and replace the filter and gasket with a pan swap.
- Identify the transmission model from the tag or pan shape.
- Check whether a pan requires a different filter or longer bolts.
- Fill to the specified level using the correct procedure and temperature.
Adapters and manual parts
Adapters connect transmissions to transfer cases or engines that were not originally paired, and need to be matched by model and spline specifications. For internal manual parts, a rebuild requires precision and special tools, and many owners rely on a transmission shop.
Support the transmission with a jack before removing any mount or crossmember, torque fasteners to specification, and confirm fitment for your exact year, make, model and transmission before ordering.
Keep a record of which transmission model and fluid you have, since the information helps when ordering any future parts. After servicing, check for leaks at the pan gasket and the mounts, and monitor the temperature if you tow.
Materials, construction and common pairings
Transmission pans are stamped steel or cast aluminum, and deep-sump versions often include fins to help cool fluid and a drain plug for easier service. Gaskets may be cork, rubber or composite, and the right type depends on the pan and the transmission maker. Mounts combine steel brackets with rubber or polyurethane, and crossmembers are steel tube or plate. Gears and synchronizers are heat-treated steel with brass or composite synchro rings that wear gradually.
Typical pairings include a pan with a filter and gasket, a mount with new crossmember bolts, a shift boot with a new shift knob, and an adapter with a matching transfer case and driveshaft. If you change the transmission mount height, check the driveshaft angles too.
Confirming fitment
The most reliable method is to identify the transmission by its tag or casting numbers and match it to the part listing. Count the pan bolts, compare pan shape, and measure the mount bolt spacing. Adapters depend on bellhousing patterns and spline counts, so these must be verified for your exact engine and transfer case.
Popular Transmission Parts brands
- Crown Automotive (136)
- Omix-Ada (60)
- Jeep (19)
- Drake (11)
- Pro Comp Suspension (10)
- Mag-Hytec (8)
- Rugged Ridge (6)
- Energy Suspension (6)
- B&M (6)
- Daystar (5)
- Advance Adapters (4)
- Prothane Motion Control (4)
Transmission Parts FAQ
What does a deep transmission pan do?
It holds extra fluid and has more surface area, which helps keep temperatures down in towing or heavy off-road use. It must match your transmission model and may need a specific filter.
How do I know my transmission mount is worn?
Common signs are clunking when shifting between drive and reverse, vibration, and visible cracks or separation in the rubber. The transmission may also sit lower or at an angle.
Why would I need a transmission drop bracket?
After a lift, the angle between transmission and transfer case or driveshaft may become steep. A drop bracket or crossmember lowers the transmission and helps restore proper angles.
Can I use any fluid in my automatic?
No. Different transmissions need specific fluids, and the wrong type can damage clutches and seals. Use the type listed in the owner's manual or the manufacturer's specifications.



























