Exterior Parts & Car Care
The main category for exterior parts and car care on Jeeps, trucks and SUVs, covering rock sliders, roof racks, skid plates, grilles, tire carriers, fender flares, window visors, bed liners and more. It suits owners protecting, restyling or repairing the outside of a vehicle. Brands include Smittybilt, Bushwacker, Omix-Ada and Crown Automotive. Use the subcategories and product pages to narrow down, then compare the products below.

Everything bolted, clipped or welded to the outside of a 4x4 lives here: armor that takes rock hits, racks and carriers that haul gear, and the trim, glass and hardware that wear out with age. On a trail rig these parts decide what you can carry and what survives a hard line.
The range is huge, so start with the job. Armor means sliders, skid plates, tube fenders and cages, usually steel. Carrying means roof racks, tire carriers and can mounts. Restyling covers grilles, flares, fuel doors and hood louvers. Repair covers hinges, latches, seals, wiper blades and factory replacement panels. Truck owners get their own corner: bed liners, rail caps, mats and organizers.
Shop exterior parts by type
More part types (131)
- Exterior Cargo Tray 3
- Exterior Door Handle 22
- Exterior Dress Up Kits 2
- Exterior Hinges 42
- Fender Deflector 5
- Fender Liner 14
- Floor Pan 40
- Floor Plug 10
- Fuel Filler Door Trim 2
- Fuel Filler Housing 5
- Gas/Water Can/Jack Mount Bracket 7
- Gas/Water Can Mount Bracket 6
- Gas Can Holder 3
- Grille Emblems 24
- Grille Mounting Spacers/Washers 5
- Grille Support 2
- Grill Inserts for light mounts 2
- Headlight Adjusting Screw 7
- Headlight Retaining Ring 6
- Hood/Trunk Prop Rod 3
- Hood Dress Up Kits 12
- Hood Hinge 11
- Hood Lift Handle 1
- Hood Lock 6
- Hood Pin Kit 5
- Hood Scoop Grille Insert 2
- Hood Scoops 8
- Hood Trim 1
- Hood Vent 31
- Horn 8
- Horn Contact Ring 1
- Horn Relay 2
- Kleinn Train Horns 26
- Ladder Rack 1
- Liftgate Glass Seal 15
- Liftgate Hinges 8
- Liftgate Parts 4
- Lift Support 13
- Light Bar Kicker 7
- Lock Cylinders 5
- Mirror Covers 7
- Paint Protectors 6
- Rack Load Bar 9
- Rear Filler Panel 1
- Rear Valances 1
- Rear View Mirror 14
- Replacement Fender Liners 8
- Replacement Grilles 35
- Replacement Hoods 9
- Replacement Steel Fenders 18
- Replacement Tailgates 15
- Replacement Tailgate Seals 5
- Roll Bar Carrier Bracket 2
- Roll Cage Mounting Kits 4
- Roof Mount Cargo Rack Ladder 1
- Roof Rack Pads 2
- Roof Rack Wind Deflector 4
- Side Skirts 1
- Side Window Covers 1
- Soft Top Tailgate Bar Retainer 8
- Soft Top Windshield Retainer 5
- Spare Tire Carrier Adapter 3
- Spare Tire Carrier Bracket 10
- Spare Tire Carrier Cargo Rack 6
- Spare Tire Carrier Delete Plates 3
- Spare Tire Spacers & Relocator Kits 7
- Specialty Paints 12
- Stainless and Aluminum Side Molding 6
- Steel Doorskins 6
- Sunroof Wind Deflectors 1
- Tailgate 1
- Tailgate Assist Gas Spring 8
- Tailgate Bar 6
- Tailgate Bump Stop 1
- Tailgate Cable 2
- Tailgate Cap Protector 19
- Tailgate Carrier Bracket 2
- Tailgate Covers and Storage 27
- Tailgate Emblem 3
- Tailgate Gasket 1
- Tailgate Handle 8
- Tailgate Hanger 1
- Tailgate Hinge 11
- Tailgate Hinge Cover 10
- Tailgate Latch Assembly 2
- Tailgate Latch Bolt 1
- Tailgate Latch Bracket 2
- Tailgate Latch Wave Washer 1
- Tailgate Light Bar 13
- Tailgate Liner Protector 3
- Tailgate Lock Cylinder 1
- Tailgate Locks 24
- Tailgate Mat 5
- Tailgate Seal 2
- Tailgate Stop 2
- Tail Light Cover Trim 1
- Touch-Up Paints 15
- Towing Mirror 1
- Truck Bed Liner 29
- Truck Bed Organizer 29
- Truck Bed Rack 12
- Truck Bed Rail to Rail Toolbox 10
- Truck Bed Stake Pocket Cover 3
- Truck Bed Tailgate Extension 32
- Truck Bed Tailgate Extension Mount Kit 7
- Truck Bed Top 11
- Tubing Clamp 14
- Vinyl Cleaner 1
- Watersports Carrier 4
- Wheel Housing 2
- Window Hinge 1
- Window Shades 2
- Windshield Bracket 21
- Windshield Channel 23
- Windshield Clamp And Hook 1
- Windshield Cowl Rubber 12
- Windshield Frame 12
- Windshield Frame Latch 1
- Windshield Glass Seal Lock 1
- Windshield Hinge 19
- Windshield Moldings 5
- Windshield Screw 3
- Windshield Seal 16
- Windshield Sunshade 2
- Windshield Tie Down Kit 16
- Windshield Tie Down Knob 1
- Wiper Blades and Refills 26
- Wiper Box Cover 1
- Wiper Cowl 2
- Wiper Motor Cover 3
- Wire Mesh Sheet 1
Popular exterior parts
Exterior parts reference
Specs and install requirements taken from the listings in this category. Use them to compare like with like, then confirm the details on the product page for your exact vehicle.
Materials in the listings
| Roll cages | 1.75" x .120 wall DOM tubing |
|---|---|
| Rock sliders (Rocker Knockers) | 3/16" plate steel |
| Transmission skid plate | 3/16" steel, black powder coat |
| Engine skid plates (Pro Comp) | Stainless steel |
| YJ fender flares | UV-stable textured ABS plastic |
| Bed rail and tailgate caps | UV-protected TPO (Dura-Flex 2000) |
| Hood louver | Laser-cut aluminum, powder coat |
| Bed liner (BedTred) | Polypropylene, 3/4" floor, 1/4" walls |
| Bed organizer (Decked) | HDPE over a steel subframe |
Largest subcategories
| Tops | 482 parts |
|---|---|
| Fender Flares | 432 parts |
| Side Steps & Running Boards | 187 parts |
| Rock Sliders and Guards | 175 parts |
| Roof Rack | 122 parts |
| Grille Inserts | 118 parts |
| Skid Plates | 108 parts |
| Tube Fenders | 80 parts |
Install requirements
| Kit detail | Install needs | |
|---|---|---|
| Trail cage kit | 8 pieces | Welding |
| Fully welded cage | Replaces factory cage | No welding needed |
| Crusher flares | Front, narrow width | Welding |
| YJ flare set | 4 pieces | Drilling |
| Locking hood latches | Keyed alike | Factory holes |
| Bed rail caps | Smoothback | No drilling |
| Defender roof rack | Universal platform | Vehicle mount kit |
| Windshield brackets | Sold as a pair | No drilling |
Check before you order
- Jeep door count: many parts come in separate 2-door and 4-door versions
- JK door handles: 2-door models need 3 handles, 4-door models need 5
- Hardtop Jeeps need the 90101 windshield channel for the Smittybilt Standard Top
- Vent style: some Poison Spyder rear plates are designed for the "wide vent" version
- Bed length: the Decked DF3 organizer is sized for a 6'6" bed
- Rain gutters: gutter-clamp rack mounts need a roof with factory gutters
- Wiper blade length and position, such as a 13-inch front blade
Bare steel parts ship uncoated. Paint or powder coat them before they see weather, and seal any holes you drill in the body.
All Exterior Parts & Car Care 3,396 parts
-
Hardtops
Jeep 2 Door/4 Door Hardtop Adapter – 82212462
- Jeep 82212462 hardtop adapter for the 2007-08 JK Wrangler
- Lets the 2007-08 JK use the 2011 hardtop by moving the windshield header mount and trim cover
- Required for hardtop part numbers JEP82212541 and JEP82212527
- Applies to 2 and 4-door models
SKU: JEP82212462 -
-
-
-
-
Fender Flares
Smittybilt TJ Wrangler 6 Inch Front Fender Flare (Paintable) – 17190-01
- Fits the 1997–2006 Jeep Wrangler TJ
- Driver-side front position; 6-inch extra-wide flare with 6 inches of coverage
- Textured, UV-stable ABS plastic, paintable
- Minimal drilling required; part number 17190-01
SKU: S/B17190-01 -
-
-
Windshield Wiper & Washer
Bestop Rear Wiper Motor Assembly – 54858-01
- Bestop rear wiper motor assembly, part number 54858-01, UPC 77848128050
- Designed for the Bestop Trektop Pro and factory soft tops on 2-door and 4-door models
- Fits Jeep Wrangler JK 2007–2015 and 2017–2018 vehicles
- Some Wrangler setups need a separate Wiring Harness or Mopar harness
SKU: BST54858-01 -
Roof Rack
ARB Steel Roof Rack Basket – 3800250
- Steel cargo roof rack basket, part number 3800250
- Rail floor with evenly spaced crossbars
- Available in several lengths and widths
- Suited to vehicles with or without gutters
- Drilling not required; roof rack and mounting system are separate items
SKU: ARB3800250 -
How this category is organized
Exterior Parts & Car Care is a wide category, so the subcategories are the quickest way to find what you need. The listings include protection parts, body and trim pieces, cargo carriers and small repair items from many brands, including Smittybilt, Bushwacker, Omix-Ada, Crown Automotive, Rugged Ridge, Bestop and Poison Spyder Customs.
- **Protection.** Rock sliders, skid plates, body armor, tube fenders and roll bars guard the underside and body from trail damage.
- **Carry and storage.** Roof racks, tire carriers, fuel and water can mounts, tailgate storage and truck bed items.
- **Body and trim.** Grilles, hoods, hood vents, door handles, hinges, tailgate parts and fuel filler doors.
- **Weather and glass.** Soft tops, windshield channels, window visors, wiper blades and washer parts.
- **Truck bed.** Bed liners, mats, side rail protectors and tailgate caps.
- **Care and repair.** Seals, snap repair kits, replacement locks and finishing touches.
Choosing a part
- **Define the job.** Ask whether you need protection, appearance, repair or carrying capacity. A rock slider and a window visor serve very different purposes.
- **Material and finish.** Steel is strong and heavy and needs coating. Aluminum saves weight. Powder coat and paintable plastic have different upkeep. Bare steel needs paint before use.
- **Vehicle fit.** Most exterior parts are vehicle specific because body lines, mounting points and sensors differ by year and model. Confirm fitment for your exact year, make and model, and use the product's notes, such as 2- and 4-door or paintable finish.
- **Hardware and tools.** Some products need welding, drilling or reuse of factory hardware. Read the details in the listing.
Installation notes
Protective parts such as rock sliders, skid plates and roll bars attach to the frame or body structure, so use the specified hardware and torque to the manufacturer's values. Welded parts should be installed by someone who can weld properly. Roll bars and cages are safety equipment, and a professional install is wise.
Soft tops and trim parts often depend on temperature and careful alignment, so follow the instructions. Fender flares, visors and lighting can be regulated by state, so check local regulations. Always keep the weight of racks and carriers within the vehicle's rated limits and the rack maker's load rating.
When shopping a category this wide, make a short list of your goals and measure the spots where parts will go. Note the vehicle's body style, cab length, roof type and factory options. Photograph existing mounts, because aftermarket parts often reuse them or require removal of trim.
Parts commonly used together include rock sliders with skid plates, tire carriers with bumpers-bumpers-tire-carriers-winch-mounts-2, fender flares with tire and wheel upgrades, and roof racks with crossbars and mounts. Common mistakes are overloading racks, ignoring clearance with lift or tire changes, and skipping rust protection on bare steel and weld seams. Maintenance depends on the part. Wash and wax painted and polished surfaces, inspect welds and bolts after hard trail use, check seals for drying or cracking, and keep drain holes on bed parts and racks clear.
Popular Exterior Parts & Car Care brands
- Bushwacker (357)
- Smittybilt (334)
- Crown Automotive (257)
- Bestop (252)
- Rugged Ridge (223)
- Omix-Ada (222)
- Poison Spyder Customs (194)
- Auto Ventshade (111)
- Rampage (98)
- BedRug (76)
- Kentrol (75)
- Jeep (69)
Exterior Parts & Car Care FAQ
How do I find the right exterior part for my vehicle?
Start with the subcategory for the part type, then check the product's fitment notes for year, make, model and body style. Confirm fitment for your exact vehicle using the manufacturer's specifications.
Do rock sliders and skid plates need professional installation?
Bolt-on versions can be done with basic tools and a helper, while others require welding. Because they attach to structural parts, use the specified hardware and torque, and consider a professional if welding is needed.
What does paintable mean on fender flares or trim?
Paintable parts come with a matte or primed surface that accepts paint, so you can match the vehicle color. Preparation, such as cleaning and using an adhesion promoter, is needed for a good finish.
Are exterior accessories regulated?
Some are. Fender coverage, window visors, lighting and bumpers can be subject to state rules. Requirements vary, so check local regulations before modifying the vehicle.


































