G2 Axle and Gear
Showing 961–1008 of 1013 resultsSorted by popularity
-
-
-
-
Differential Covers
G2 Chrysler 8.25 Inch Aluminum Cover – 40-2029AL
- Rear differential cover for Chrysler 8.25 inch axles, part number 40-2029AL
- Lightweight cast aluminum body with reinforcing ribs
- Heat treated and shot peened casting for impact resistance
- Raw natural aluminum finish
- Seal face machined to help prevent leaks at fit-up
SKU: G/240-2029AL -
-
Replacement Axle Shafts
G2 Dana 30 YJ/XJ/TJ 27 Spline Front Chromoly Axle Kit – 98-2031-001
- Dana 30 front chromoly axle kit, 27 spline, uses 5-760X joint
- For 1987-1995 Wrangler (YJ) with disconnect eliminator, 1997 and newer TJ, 1984-2001 XJ
- 4340 chrome/nickel alloy; does not include a differential
SKU: G/298-2031-001 -
-
Drive Shafts
G2 Double Cardan CV Style Rear Drive Shaft – 92-2052-3
- Jeep Wrangler JK (2007-2018) rear double cardan CV drive shaft, part number 92-2052-3
- Heavy duty D.O.M. tubing with solid body 1350 U-joints
- Recommended for stock through 6 inch lift, tires up to 37 inches
- Dynamically balanced, fits 2-door models with automatic transmissions
SKU: G/292-2052-3 -
Axle Upgrade Kits
G2 Dana 44 JK 30 Spline Placer Gold Rear Chromoly Axle Kit – 196-2052-030
- G2 Dana 44 JK 30 spline Placer Gold rear chromoly axle kit, part 196-2052-030
- Forged 4340 chromoly steel with a dual bolt pattern flange
- Includes wheel studs and wheel bearings
- Jeep JK Dana 44 rear axle kit, for a standard non-Rubicon 30 spline differential
SKU: G/2196-2052-030 -
Dana 44 Axle Shafts
G2 Dana 44 Replacement Axle Shaft – 95-2033-1-301
- Forged driver side replacement rear axle shaft for 1997–2006 Jeep Wrangler (TJ) with Dana 44 option
- 30 spline, 29.25 inch overall length
- 5 on 4.5 inch and 5 on 5.5 inch bolt circle
- Wheel studs not included, 1/2 inch by 20 UNF studs needed
- G2 Axle and Gear part number 95-2033-1-301
SKU: G/295-2033-1-301 -
Differential Covers
G2 Dana 25/27/30 G-2 Aluminum Differential Cover Black – 40-2031ALB
- Front differential cover for Dana 25, 27 and 30 axles, part number 40-2031ALB
- Cast lightweight aluminum with reinforcing ribs to dissipate heat
- Heat treated and shot peened to handle direct impact
- Fully machined seal surface for a leak free installation
- Black powder coated finish with extra oil capacity
SKU: G/240-2031ALB -
Ring and Pinion Installation Kits
G2 Dana 30/35 XJ 4.88 Ring and Pinion Minor Installation Kit – 4-XJ-488M
Ring and Pinion Installation KitsG2 Dana 30/35 XJ 4.88 Ring and Pinion Minor Installation Kit – 4-XJ-488M
- 4.88 front Dana 30 and rear Dana 35 ring and pinion kit
- Includes front and rear matched minor installation kits
- For the 1984–2001 Jeep Cherokee (XJ)
- Computer heat treated 8620 steel; limited lifetime warranty
SKU: G/24-XJ-488M -
-
-
-
-
-
-
-
-
Dana 44 Complete Assemblies
CORE 44 Front Axle Assembly with 4.10 Ratio and Eaton E-Locker
- Complete CORE 44 front axle housing with 4.10 ratio
- Eaton E-Locker, 30 spline G2 chromoly axles and SAE bearings
- Built for 1997-2006 Jeep Wrangler TJ and 1984-2001 Cherokee XJ
- G2 Axle and Gear UPC 631410132847
SKU: G/2C4TSFS410EC0 -
-
Drive Shafts
G2 Double Cardan CV Style Front Drive Shaft – 92-2050-4
- G2 Axle and Gear 92-2050-4 front double cardan CV drive shaft for 2007–2018 Jeep Wrangler JK
- Extended length with 1350 U-joints, D.O.M. tubing and dynamic balancing
- Recommended for stock to 6 inch lift, with tires up to 37 inch
- No slip yoke eliminator required.
SKU: G/292-2050-4 -
-
Dana 44 Differential Covers
G2 Dana 44 Aluminum Cover – 40-2033AL
- G2 Axle and Gear aluminum differential cover 40-2033AL for Dana 44 front or rear axles
- Cast lightweight aluminum to help dissipate heat from the gear oil
- Reinforcing ribs, heat treated and shot peened for impacts
- Fully machined seal surface for a leak-free installation
SKU: G/240-2033AL -
-
Locking Hubs
G2 G2 Dana 50 and Dana 60 Extreme Hub (Polished Aluminum) – 89-2034-1
- Locking hubs for 30 spline shafts on most Dana 50, 60 and 61 axles
- Nodular iron body, heat treated steel locking ring
- Aluminum cap, alloy dial, polished aluminum finish
- G2 Axle and Gear part number 89-2034-1
SKU: G/289-2034-1 -
-
-
-
-
-
Drive Shafts
G2 Double Cardan CV Style Front Drive Shaft – 92-2050-3
- Front Double Cardan CV drive shaft for two- and four-door Jeep Wrangler JK models
- Part number 92-2050-3, 1350 U-joint
- Rated for stock to 6 inch lift and tires up to 37 inches
- Heavy duty D.O.M. tubing with solid body U-joints
SKU: G/292-2050-3 -
Drive Shafts
G2 Double Cardan CV Style Rear Drive Shaft – 92-2052-7
- Built for the Jeep Wrangler JK (2007-2018)
- Double cardan CV style rear drive shaft, part number 92-2052-7
- Heavy duty D.O.M. tubing with solid body 1350 U-joints, dynamically balanced
- Recommended for stock to 6 inch lift, tires up to 37 inches
SKU: G/292-2052-7 -
Dana 44 Ring and Pinion
G2 XJ Cherokee Front and Rear 4.88 Ring and Pinion Kit – 4-XJ4-488
- Fits 1984 to 2001 XJ Cherokee
- Front Dana 30 reverse 4.88 and rear Dana 44 4.88
- Includes matched front and rear master installation kits
- Computer heat treated 8620 steel, double shot peened
- Limited lifetime warranty
SKU: G/24-XJ4-488 -
-
-
-
Axle Truss
G2 Dana 30 Front Axle Truss – 68-2050
- Fits the 2007–2018 Jeep Wrangler JK with a Dana 30 front axle
- Heavy-duty steel: 1/4-inch main components and 1/8-inch reinforcement plates
- Includes gusset, truss and bracket
- Welding required, including to the cast center section
- Unpainted, without a steering ram mount; part number 68-2050
SKU: G/268-2050 -
Axle Housing
JEEP JK FRONT CORE 44 METRIC HOUSING ADDED CASTER 4″-UP LIFT
- Front axle housing for 2007 and newer Jeep JK Wrangler, part 67-2051JKFL
- Added caster for lifts of 4-inch and higher
- High-pinion Dana 44 design with forged inner C-ends
- Metric carrier bearings allow the factory air locker
SKU: G/267-2051JKFL -
Dana 44 Ring and Pinion
G2 XJ Cherokee Front and Rear 4.56 Ring and Pinion Kit – 4-XJ4-456
- Fits 1984 to 2001 XJ Cherokee
- Front Dana 30 reverse 4.56 and rear Dana 44 4.56
- Includes matched front and rear master installation kits
- Computer heat treated 8620 steel with double shot peened gears
- Limited lifetime warranty
SKU: G/24-XJ4-456 -
Dana 44 Axle Shafts
G2 Dana 44 JK Rubicon 32 Spline Rear Chromoly Axle Kit – 96-2052-3-32
- Rear axle shaft kit for 2007–2014 Jeep Wrangler (JK) with Dana 44 rear axles
- 32 spline shafts, dual drilled for 5 x 5 and 5 x 5.5 wheel patterns
- Includes wheel bearings, seals and screw in wheel studs
- Forged, heat treated alloy steel
- G2 Axle and Gear part number 96-2052-3-32
SKU: G/296-2052-3-32 -
-
-
-
-
Dana 44 Axle Shafts
G2 Dana 44 JK 07-09 Replacement Axle Shaft – 95-2052-1
- Forged replacement rear axle shaft for 2007–2009 Jeep Wrangler (JK) with a Dana 44 axle
- 30 spline, 31.50 inch overall length
- Forged 1541H steel, heat treated
- Fits both LH and RH positions
- G2 Axle and Gear part number 95-2052-1
SKU: G/295-2052-1











































