Overview
It is a 4.56 gear ratio ring and pinion set for GM 10 bolt axles. It is made for oversized tires and high performance engines, and it fits 8.5-inch and 8.6-inch GM 10 bolt axles.
The gears are made from computer heat treated 8620 steel, double shot peened and double lapped. They are made to O.E. specifications and aimed at strength and quiet running.
Key features
- Computer heat treated 8620 steel
- Double shot peened for added strength
- Double lapped and manufactured to O.E. specifications
- Carrier requirement: 2.73 up carrier
- Works in 8.6-inch axles with the 35-2022 master kit
- 10 year warranty
Ratio, tire size and setup
A 4.56 ratio is a numerically higher gear, and higher ratios generally help a vehicle accelerate and pull, which matters with oversized tires. It also means the engine turns faster at highway speed, so the trade-off depends on how the vehicle is used. Choose the ratio with tire size, engine and typical driving in mind.
Ring and pinion sets need careful setup for gear mesh and pinion depth, and the carrier needs to be a 2.73 up unit. Check the axle housing for cracks and the carrier bearing bores before installation. Expect a break-in period and recheck the mesh after the first few drives.
- Confirm the carrier and axle size before installing
- Replace the pinion seal when the setup is opened
- Use the correct master kit for the 8.6-inch application
- Check gear oil level after break-in
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2021-456 |
| UPC | 631410093551 |
| Gear ratio | 4.56 |
| Axle type | GM 10 bolt, 8.5 inches and 8.6 inches |
| Carrier | 2.73 up carrier |
| Material | 8620 steel, computer heat treated |
| Surface treatment | Double shot peened, double lapped |
| Warranty | 10 year |
Vehicle fitment
The set fits GM 10 bolt axles at 8.5 inches and 8.6 inches. Choose it by axle type and size, and confirm the carrier is a 2.73 up carrier.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Ring and pinion sets need professional setup for gear mesh and pinion depth, and the new gears need a break-in period after installation. Confirm the carrier and axle size before the gears go in.
What’s included
The ring and pinion set. Not included: the 35-2022 master kit, which the 8.6-inch application calls for.















