Select your vehicle

Transfer Case Parts

Parts for 4×4 transfer cases, from seals, bearings, and switches to yokes, shift knobs, lowering kits, and overhaul kits. Crown Automotive, Omix-Ada, Trail Gear, and Jeep supply many of the listings, with plenty of parts for the NP231 and similar Jeep cases. Match the case model carefully on each product page, then compare the products below.

New Jeep NP241 transfer case assembly for the JK Wrangler

The transfer case is what makes a 4x4 a 4x4. It feeds the front axle and supplies the low range you crawl in. These parts keep it sealed, shifting cleanly and spinning true, and help it live with a lift, longer driveshafts and deeper gearing.

Most listings are repair parts: output and input seals, bearings, chains, shift forks, gaskets and full rebuild kits. Upgrade parts cover slip yoke eliminators, fixed yokes, lowering kits, shifters and low-range gear sets. Old Jeep cases such as the Dana 18, Dana 20 and Dana 300 share the shelf with the NP231, NP242 and NV241, so pick the case first and the vehicle second.

269Parts listed
77Part types
2.72:1NP231 low range
4.0:1Rock-Trac low range
3.15:1Dana 20 low range kit
1"YJ/TJ lowering kit drop

Shop transfer case parts by type

More part types (63)

Popular transfer case parts

Jeep transfer case reference

Factory low-range ratios for the Jeep cases that most parts here are listed for. A deeper low range multiplies crawl gearing along with your axle ratio.

Common Jeep transfer cases

Found inLow range
Dana 181941–1971 Willys and CJ2.46:1
Dana 201972–1979 CJ2.03:1
Dana 3001980–1986 CJ2.62:1
NP231 Command-TracYJ, TJ, XJ (part-time)2.72:1
NP242 Selec-TracXJ, ZJ, KJ (full-time option)2.72:1
NV241 Command-TracJK Wrangler (non-Rubicon)2.72:1
NV241OR Rock-TracTJ and JK Rubicon4.0:1

Rebuild kit contents

G2 NP231 rebuild kit (94–06)Bearings, seals, bushings, gaskets
Chain in the G2 kit?No, buy it separately
Alloy USA chainNP231 and NP233
Crown Model 20 seal kit2 shift rod seals, 2 output seals
Gaskets in that kit5
NP231/242 oil pump housing5-3/8" OD, housing seal included

Low-range and swap parts

  • TeraFlex Model 20 low range kit: drops low range to 3.15:1
  • Trail Gear Trail-Creeper: adapter for running two transfer cases (21 spline)
  • Trail Gear 23-spline 2.28 input gear set for gear-driven 4-cylinder cases
  • Trail Gear top shift conversion and shifter kits
  • Advance Adapters TJ shifter bracket: removes the body-mounted shifter mount

Slip yoke eliminator notes

  • Replaces the slip yoke output with a fixed yoke or flange on the rear
  • Rubicon Express NP231 kit is listed for 1987–2006 Jeep NP231 cases
  • The RE kit keeps the factory speedometer and vacuum shift sensors working
  • A shorter tailhousing makes room for a longer rear driveshaft
  • Plan on a CV-style rear driveshaft built to the new length

Read the ID tag on the case before you order. Cases fitted to the same Jeep model can differ inside, so a seal or gear from a near match may not fit.

All Transfer Case Parts 282 parts

Showing 1–12 of 282 resultsSorted by popularity

What the transfer case does

The transfer case sits behind the transmission and splits power between the front and rear driveshafts. It also provides the low range that gives a 4x4 its crawling gear. Because it is full of gears, chains, and bearings, wear shows up as leaks, noise, popping out of gear, or trouble shifting. Most of the parts here help with repair, maintenance, and modification.

Parts you will find

  • Seals and gaskets: output shaft seals, input seals, and washers that stop fluid leaks.
  • Bearings and sprockets: main drive sprocket bearings, bearing cups, and related internals for rebuilding.
  • Yokes: output and slip yokes, including types used with slip yoke eliminator kits.
  • Slip yoke eliminator kits: convert the rear output to a fixed yoke, which is used with a lifted vehicle and a driveshaft with a constant velocity joint.
  • Lowering kits: reposition the case to improve driveline angles after a lift.
  • Overhaul kits: sets with a group of wear parts for a rebuild.
  • Switches and shift knobs: electrical parts like indicator lamp switches, and the control hardware.

Identifying your case

Transfer cases look alike, but the internals differ. Common examples include the NP231 and other models used in Jeeps. Check the tag or plate on the case, and compare the model, spline count, and rotation, since a part that is slightly off may not seal or mesh. Listings often specify case model and vehicle years, so confirm both, and match whether the part is for the front or rear output.

Maintenance and installation

Many leaks come from the output seals and the vent. Replacing a seal usually means removing the yoke, so mark its position and tighten the nut to the specified torque. Replace the fluid with the type specified for your case, because using the wrong oil can damage clutch components or cause noise. A transfer case rebuild requires care, a clean workspace, and the right tools, so a professional may be the better choice for internal work.

After a lift, have the driveline angles reviewed, since steep angles cause vibration and wear. Slip yoke eliminators and lowering kits change geometry and should be installed correctly. Always confirm fitment for your exact year, make, model, and transfer case with the manufacturer's specifications.

Inspection and common mistakes

Check the fluid level and condition first. Milky fluid points to water entering through a bad vent or seal, and a burnt smell can point to overheating. Make sure the vent is clear and the vent hose is routed up high. Inspect the shift linkage and bushings, because sloppy linkage is often blamed on the case itself. Before ordering parts, find any numbers cast into the housing and compare them against your records. Do not mix parts from different case families, and replace seals in pairs when you can. After a repair, road test for leaks, noise, and smooth engagement in each range, and check for driveline vibration, which can show up as a shudder under load.

Keep a log of fluid changes and any leaks you fix, and carry a spare seal and a small quantity of the correct fluid on remote trips, since a slow leak found early is far cheaper than a failed case.

Popular Transfer Case Parts brands

Transfer Case Parts FAQ

How do I know which transfer case I have?

Look for the tag or tag number on the case and check your vehicle's documentation. Model, year, and drivetrain all help narrow it down. Because internals differ between cases, confirm the exact model before choosing parts.

What is a slip yoke eliminator?

It is a kit that replaces the sliding rear yoke with a fixed one, so the driveshaft uses a slip section instead and the output shaft is supported better. It is often used after a lift, and it usually requires a new driveshaft.

What causes a transfer case to leak?

Worn output or input seals, a clogged vent, a bad gasket, or a damaged yoke are common causes. Check the fluid level, find the source, and replace the failing part before running the case low on oil.

Can I rebuild a transfer case myself?

If you are experienced with drivetrain work, yes, with a service manual and the right tools. Internal rebuilds are detailed, and mistakes can be costly. Many owners choose a shop for anything beyond seals or a fluid change.