Complete Dana 44 assemblies ready to be installed into your vehicle.
Dana 44 Complete Assemblies
Showing all 5 results
-
Dana 44 Complete Assemblies
Dana Spicer Jeep JK Ultimate Dana 44 Front Axle Assembly 4.88 Ratio – 10010521
Dana 44 Complete AssembliesDana Spicer Jeep JK Ultimate Dana 44 Front Axle Assembly 4.88 Ratio – 10010521
- 2 and 4-door models
- 4.88 Genuine Spicer® Gears
- 5/16″ thick axle tubes for improved strength, rigidity and durability
- Redesigned and thicker brackets
- Spicer® chromoly axle shafts
- Spicer Life Series® (SPL®) 1350 u-joints with triple lip seals and full-circle clips
- Performance differential cover and Spicer® performance gasket
- Selectable electronic locking differential (harness sold separately, part number D/S10021771)
- Improved caster angle and pinion angle optimized for lifted Jeeps
- Increased gross axle weight rating
- Dana recommends using military tested and approved 75W-140 synthetic lube (not included)
SKU: D/S10010521 -
Dana 44 Complete Assemblies
G2 JK CORE 44 Front Axle With 4.56 Ratio and 35 Spline ARB Air Locker Differential – C4JMFS456AP5
Dana 44 Complete AssembliesG2 JK CORE 44 Front Axle With 4.56 Ratio and 35 Spline ARB Air Locker Differential – C4JMFS456AP5
- 07-Current Wrangler JK, 2and 4 Door
- High Pinion Front with 4.56 gear ratio and ARB Air Locker
- Utilizes new generation 8.8in. JK 44 ring and pinion with larger pinion shaft
- USA Made 4340 Chromalloy 1.5in. 35 spline Placer axle shafts
- Heavy duty Dana Spicer 5-7166X Axle U-Joints
- Factory style flange pinion yoke
- Standard axle caster for 0-4 inch lifts
- Massive forged inner C-ends
- Integrated skid plates on lower control arm mounts
- Heavy-duty 1/4in. laser cut brackets
- Heavy duty 3in. diameter 5/16in. DOM tubes
- Reinforcing ribs for added strength and protection
- Uses metric Rubicon style carrier bearings
- Heavy duty forged bearing caps
- Spanner nuts for backlash adjustment
- Heat-treated aluminum diff cover with cooling fins
SKU: G/2C4JMFS456AP5 -
Dana 44 Complete Assemblies
G2 JK CORE 44 Front Axle With 4.56 Ratio and 35 Spline Auburn Ected Differential – C4JMFS456MP5
Dana 44 Complete AssembliesG2 JK CORE 44 Front Axle With 4.56 Ratio and 35 Spline Auburn Ected Differential – C4JMFS456MP5
- JK High Pinion Front with 4.56 gear ratio and Auburn Ected
- Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
- USA Made 4340 Chromalloy 1.5in. 35 spline Placer axle shafts
- Heavy duty Dana Spicer 5-7166X Axle U-Joints
- Factory style flange pinion yoke
- Standard axle caster for 0-4 inch lifts
- Massive forged inner C-ends
- Integrated skid plates on lower control arm mounts
- Heavy-duty 1/4in. laser cut brackets
- Heavy duty 3in. diameter 5/16in. DOM tubes
- Reinforcing ribs for added strength and protection
- Uses metric Rubicon style carrier bearings
- Heavy duty forged bearing caps
- Spanner nuts for backlash adjustment
- Heat-treated aluminum diff cover with cooling fins
SKU: G/2C4JMFS456MP5 -
Dana 44 Complete Assemblies
G2 JK CORE 44 High Pinion Front Axle With 5.38 Ratio and 35 Spline ARB Air Locker Differential – C4JMFL538AP5
Dana 44 Complete AssembliesG2 JK CORE 44 High Pinion Front Axle With 5.38 Ratio and 35 Spline ARB Air Locker Differential – C4JMFL538AP5
- JK High Pinion Front with 5.38 gear ratio and ARB Air Locker
- Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
- USA Made 4340 Chromalloy 1.5in. 35 spline Placer axle shafts
- Heavy duty Dana Spicer 5-7166X Axle U-Joints
- Factory style flange pinion yoke
- 3 Degrees extra axle caster for 6in. and up lifts
- Massive forged inner C-ends
- Integrated skid plates on lower control arm mounts
- Heavy-duty 1/4in. laser cut brackets
- Heavy duty 3in. diameter 5/16in. DOM tubes
- Reinforcing ribs for added strength and protection
- Uses metric Rubicon style carrier bearings
- Heavy duty forged bearing caps
- Spanner nuts for backlash adjustment
- Heat-treated aluminum diff cover with cooling fins
SKU: G/2C4JMFL538AP5 -
Dana 44 Complete Assemblies
Dana Spicer Jeep JK Ultimate Dana 44 Front Axle Assembly 5.13 Ratio – 10010522
Dana 44 Complete AssembliesDana Spicer Jeep JK Ultimate Dana 44 Front Axle Assembly 5.13 Ratio – 10010522
- 2 and 4-door models
- 5.13 Genuine Spicer® Gears
- 5/16″ thick axle tubes for improved strength, rigidity and durability
- Redesigned and thicker brackets
- Spicer® chromoly axle shafts
- Spicer Life Series® (SPL®) 1350 u-joints with triple lip seals and full-circle clips
- Performance differential cover and Spicer® performance gasket
- Selectable electronic locking differential (harness sold separately, part number D/S10021771)
- Improved caster angle and pinion angle optimized for lifted Jeeps
- Increased gross axle weight rating
- Dana recommends using military tested and approved 75W-140 synthetic lube (not included)
SKU: D/S10010522