Overview
The G2 Axle and Gear 2-2011-543 is a 5.43 ratio ring and pinion for the Ford 9 inch rear axle. It works with all ratio carriers and is made for the rear location.
The gears are built for oversized tires and high performance engines. They use computer heat treated 8620 steel and may need minor case clearancing, so have the housing checked before the set is installed.
Key features
- 5.43 ratio rear ring and pinion
- Ford 9 inch rear axle
- Works with all ratio carriers
- Computer heat treated 8620 steel
- Double shot peened surfaces
- Double lapped gear set
- Manufactured to O.E. specifications
- 10 year warranty from G2
Case clearancing and the 9 inch
Case clearancing is the removal of a small amount of material inside the differential housing so a larger ring gear can rotate without contact. It is usually a light job done by a shop with the right tools, and it is worth doing before the gears are installed rather than after noise appears. The housing, cover and carrier should all be inspected together so nothing binds once the new set is in.
On a Ford 9 inch, the carrier, pinion bearings and axle bearings all share the load of a larger ring gear. Replacing the pinion seal and carrier bearings while the cover is off keeps the new mesh from shifting. Look at the old gears for chips or heavy wear, and check the axle shafts for play, since these point to worn parts that should be replaced at the same time.
- Inspect the housing for cracks before clearancing
- Set backlash with a dial indicator
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2011-543 |
| UPC | 631410105483 |
| Gear ratio | 5.43 |
| Axle location | Rear |
| Axle type | Ford 9 inch |
| Popular axle manufacturer | Ford |
| Carrier requirement | All ratio carriers |
| Material | Computer heat treated 8620 steel |
Vehicle fitment
It fits the Ford 9 inch rear axle at a 5.43 ratio. Check the housing for clearance before fitting the gears.
Only the Ford 9 inch is named for this 5.43 set. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the housing for the minor case clearancing G2 mentions, then have a driveline shop set pinion depth, backlash and bearing preload on the 5.43 gears.
What’s included
A matched ring and pinion for the Ford 9 inch rear axle.














