Overview
The G2 Axle and Gear 2-2031-488 is a Dana 30 short 4.88 ratio front ring and pinion set for the Jeep TJ Wrangler, WJ Grand Cherokee, XJ Cherokee and ZJ Grand Cherokee.
G2 says its ring and pinion sets are engineered for demanding applications, with computer heat treated 8620 steel, double shot peening and double lapping, backed by a 10 year warranty. The 2-2031-488 is a front gear set that G2 says needs a 3.73 and up carrier.
Key features
- Front Dana 30 short ring and pinion, 4.88 ratio
- For use in the front axle of 1997–2005 TJ Wrangler
- It also fits the front axle of 1999–2005 WJ, 2000–2005 XJ and 1996.5–1998 ZJ models.
- Used with a 3.73 and up carrier
- Computer heat treated 8620 steel, double shot peened and double lapped
- Manufactured to O.E. specifications, with a 10 year warranty
Gear ratio and carrier match
A numerically higher ratio like 4.88 changes how the front axle works at low speed and under load. Pair it with tire size and engine output, since a taller tire can offset some of the change. The carrier must match the gears, so confirm it before buying.
Pinion and carrier bearings are set to the new gear depth and preload, so replacing them with the gears is normal. Setup and break-in are best handled by a trained installer. Gentle driving after installation lets the gears settle, and it is worth rechecking bolt torque and gear oil level after the first drives.
- Confirm the carrier before ordering gears
- Replace pinion and carrier bearings with the new set
- Use fresh gear oil after setup
- Look for leaks around the front cover after first drives
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2031-488 |
| UPC | 631410093872 |
| Product type | Front ring and pinion gear set |
| Gear ratio | 4.88 |
| Axle manufacturer | Dana |
| Axle type | Dana 30 TJ (short) |
| Axle location | Front |
| Carrier | For use with 3.73 and up carrier |
| Material | Computer heat treated 8620 steel |
| Manufacturing | Manufactured to O.E. specifications, double shot peened, double lapped |
| Warranty | 10 year warranty |
Vehicle fitment
It fits the front axle of the 1997–2005 Jeep TJ Wrangler, the 1999–2005 WJ Grand Cherokee, the 2000–2005 XJ Cherokee and the 1996.5–1998 ZJ Grand Cherokee.
This is a front axle gear set only, and it does not cover rear axles, the YJ Wrangler or other Jeep models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
With the 2-2031-488 you must set pinion depth, preload and backlash on the front differential, and the carrier must be a 3.73 and up unit as G2 states. Gear setup and break-in are normally handled by a trained installer. Fresh gear oil is needed once the front differential is closed up again.
What’s included
- One front Dana 30 short ring and pinion gear set, 4.88 ratio
Not included: an installation kit, bearings, seals and carrier, which are separate parts.




























