Overview
The G2 2-2034-488 is a 4.88 ratio ring and pinion set for the Dana 60 axle. It is built for use with a 4.56 and up carrier and is designed to handle oversized tires and high performance engines.
The gears are made from computer heat treated 8620 steel, double shot peened, double lapped and manufactured to OE specifications. The set carries a 10 year warranty. It works in front or rear Dana 60 axle locations, so confirm your axle location and carrier before ordering.
Key features
- 4.88 gear ratio
- For use with a 4.56 and up carrier
- Computer heat treated 8620 steel
- Double shot peened
- Double lapped
- Manufactured to OE specifications
- 10 year warranty
Setup and break-in
A ring and pinion set depends on careful setup, including pinion depth, bearing preload and backlash. The contact pattern on the gear teeth shows whether those settings are correct, and an incorrect pattern can wear quickly or whine under load. Setup usually needs a shop with the proper gauges and tools, and the carrier and pinion bearings should be checked for play before the new set is installed.
Break-in matters for a new set. Drive gently at first, vary speed and load, and avoid sustained heavy towing during the early miles. Change the gear oil with a fresh lubricant suited to the axle after break-in, since debris from the new teeth can collect in the old fluid. Listen for whining or clunking as the gears settle, and stop if the noise grows.
- Check pinion depth and preload
- Verify the contact pattern before final assembly
- Change gear oil after break-in
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2034-488 |
| UPC | 631410094190 |
| Axle type | Dana 60 |
| Axle location | Front or rear |
| Gear ratio | 4.88 |
| Carrier requirement | 4.56 and up |
| Gear material | Computer heat treated 8620 steel |
| Finish | Double shot peened, double lapped |
| Manufacturing | OE specifications |
| Warranty | 10 year |
Vehicle fitment
No vehicle is named for this set. It is built for the Dana 60 axle, so confirm the axle location and the carrier ratio of your truck before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Verify the carrier ratio first, since this set is for a 4.56 or higher carrier. A gear set like this needs professional setup and a proper break-in period.
What’s included
The ring and pinion gear set.














