Overview
The AMC 20 rear one-piece axle kit, part 96-2025-1, has 29 splines and a 5-lug pattern. It fits 1976–1982 Narrow Track Jeep CJ models.
The axle shafts are high-tensile alloy steel, forged and heat treated for strength. The larger diameter of Big Spline shafts is designed to handle much higher torsional loads than stock diameter, so the shafts are less likely to be the weakest point of the driveline. With 29 splines, the kit only engages gears cut for 29 splines, so check the differential before buying. Axle width matters as much as model year on these Jeeps.
Key features
- Rear axle kit for the AMC 20
- 29 spline, 5-lug, one-piece axle design
- Includes wheel bearings
- Includes wheel studs
- Includes retainer plates with seals
- Made from high tensile alloy steel, forged and heat treated
- Fits 76-82 Narrow Track CJ
- Axle: AMC 20 rear
- Construction: 1-piece axle kit
Replacing axle shafts as a set
Axle shafts carry torque from the differential to the wheels, so a worn or cracked shaft can fail under load. The shaft is only part of the job: the bearings and retainer seals wear alongside it, and replacing them together avoids a second teardown. Mark the left and right shafts before removal, because the two sides are not interchangeable.
Spline count, length and side all have to match the axle you are replacing. Check the differential side gears and the carrier for chips before reassembly, since debris can damage a new shaft quickly. Torque the retainer bolts evenly and check for play once the wheel is back on.
- Measure the old shaft before ordering a replacement
- Replace retainer seals with the bearings
- Check the differential for metal chips
- Recheck torque after the first drive
Specifications
The 96-2025-1 is a rear one-piece axle kit for the AMC 20 rear axle, with 29 splines. Every figure in the table below is the manufacturer value for the 96-2025-1.
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 96-2025-1 |
| UPC | 631410096859 |
| Part type | Rear one-piece axle kit |
| Axle | AMC 20 rear |
| Spline | 29 spline |
| Lug pattern | 5-lug |
| Construction | 1-piece axle kit |
| Differential | None included |
| Application stated | 76-82 Narrow Track CJ |
Vehicle fitment
No vehicle year or model list is published for the 96-2025-1; check the manufacturer specifications for the exact application.
Application: 76-82 Narrow Track CJ
Measure the shaft you are replacing and compare it with the 96-2025-1 listing for spline count, length and side.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit includes wheel studs, bearings and retainer plates with seals, so the original shafts and bearings are replaced as a set.
What’s included
- Wheel bearings
- Wheel studs
- Retainer plates with seals
- One-piece axle shafts











