Select your vehicle

G2 Dana 30 JK With ARB Air Locker Master Ring and Pinion Installation Kit – 35-2050ARB

G2 Axle and Gear

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Master kit with bearings for the Dana 30 (Jeep JK front, ARB Air Locker) axle, front
  • For use in Jeep JK Dana 30 front with ARB Air Locker only
  • Includes Timken pinion bearings, shims, nut, seal and crush sleeve
  • Gear marking compound, thread locking compound and silicone sealer

Description

Overview

The G2 Axle and Gear 35-2050ARB is a master ring and pinion installation kit with bearings for the Jeep Wrangler JK (Dana 30 front axle with an ARB Air Locker).

The 35-2050ARB is a master kit that includes the parts needed to install a ring and pinion, with Timken pinion bearings and races, shims, nut, seal and compounds. The carrier bearings are not included, so they must be bought separately. It is for the Jeep JK Dana 30 front axle with an ARB Air Locker only. Some of its parts are hard to find items that auto parts stores rarely stock. The ring and pinion gear set itself is not part of the kit.

Key features

  • Master kit with bearings for the Dana 30 (Jeep JK front, ARB Air Locker) axle
  • Timken outer and inner pinion bearings and races
  • Pinion shims and carrier shims
  • Carrier bearings are not included in this version
  • Pinion nut, crush sleeve, pinion seal and ring gear bolts
  • Thread locking compound, gear marking compound and silicone sealer
  • For use in Jeep JK Dana 30 front with ARB Air Locker only
  • Kit does NOT include carrier bearings

Locker and carrier bearings

An ARB Air Locker changes how the carrier is shimmed, so the front job needs more planning than a plain open carrier. The kit covers the pinion side and shims, but the carrier bearings are not included, so they should be on hand before the axle is opened. Matching the bearings to the carrier prevents a stalled job halfway through.

A Dana 30 in a Jeep JK sees steering loads and off-road torque, so the pinion and carrier need to be seated well. Check the locker’s operation after assembly, and inspect the axle shafts and seals while the housing is open. Keep the gear oil clean during break-in, because metal from new gears can contaminate a locker.

  • Order carrier bearings before starting
  • Check locker operation after assembly
  • Keep gear oil clean during break-in

Specifications

Brand G2 Axle and Gear
Part number 35-2050ARB
UPC 631410116380
Product type Master ring and pinion installation kit with bearings
Axle Dana 30 (Jeep JK front, ARB Air Locker)
Axle location Front
Popular axle manufacturer Dana
Kit type Master kit with bearings
Listing condition For use in Jeep JK Dana 30 front with ARB Air Locker only
Listing condition Kit does NOT include carrier bearings
Contents Pinion nut, pinion seal, Timken outer pinion bearing and race, crush sleeve, Timken inner pinion bearing and race, pinion shims, carrier shims, ring gear bolts, thread locking compound, gear marking compound, silicone sealer

Vehicle fitment

The 35-2050ARB fits the Jeep Wrangler JK (2007–2018) with a Dana 30 front axle and ARB Air Locker.

It does not fit the Wrangler TJ, LJ or JL, and it is for the front axle only, not the rear. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

A master kit such as the 35-2050ARB rebuilds the gear setup completely, so the bearings are replaced along with the gear set. The pinion shims, carrier shims, crush sleeve and gear marking compound in the 35-2050ARB are the parts used to set pinion depth, preload and the tooth contact pattern, which calls for an installer with gear setup experience and a careful break-in afterwards. Because the carrier bearings are not included, the ARB Air Locker carrier bearings must come separately.

What’s included

  • Pinion nut
  • Pinion seal
  • Timken outer pinion bearing and race
  • Crush sleeve
  • Timken inner pinion bearing and race
  • Pinion shims
  • Carrier shims
  • Ring gear bolts
  • Thread locking compound
  • Gear marking compound
  • Silicone sealer

Not included with the 35-2050ARB: ring and pinion gear set; carrier bearings and races.

SKU: G/235-2050ARB Category:

Specification

Shipping weight 3.50 lbs
Package dimensions 12.90 × 12.80 × 3.10 in
brands

Fitment

VehicleYearsTrims
Jeep Wrangler (JK) likely fits2007–2018All

Vehicles marked "likely fits" are inferred from the product description rather than a manufacturer fitment list. Please confirm fitment with the manufacturer before ordering.

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Which vehicles does the G2 35-2050ARB fit?

It is for the Jeep JK Dana 30 front axle with an ARB Air Locker. It fits the Jeep Wrangler JK built from 2007 to 2018. Confirm your axle before choosing it.

What is included in the G2 35-2050ARB kit?

The 35-2050ARB kit includes pinion nut, pinion seal, Timken outer pinion bearing and race, crush sleeve, Timken inner pinion bearing and race, pinion shims, carrier shims, ring gear bolts, thread locking compound, gear marking compound and silicone sealer.

Does the 35-2050ARB include the ring and pinion gears?

No. The 35-2050ARB is installation parts and bearings only, so the ring and pinion gear set and carrier bearings must be obtained separately.

Does the 35-2050ARB include carrier bearings?

No. The kit does not include carrier bearings. It does include Timken inner and outer pinion bearings and races, and it is for the Jeep JK Dana 30 front with an ARB Air Locker.

Can a Jeep JK front with an ARB locker use a standard carrier bearing set?

Confirm the bearing size for your carrier before buying. Carrier bearings are sized to the housing and carrier design, so a locker carrier may need a different set than a standard open carrier.

How do I know the pinion bearings need replacing on a Dana 30?

Noise that changes with load, play in the pinion flange and heat around the front housing are common signs. Replacing the pinion bearings with new gears avoids a second teardown and keeps the pattern set at the right depth.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon