Select your vehicle

Replacement Parts

Replacement parts for Jeep and other 4×4 vehicles, from gaskets and hoses to mirrors, torque boxes, tie rod ends and differential carriers. The listings are mostly from Crown Automotive and Omix-Ada, with items from RT Off-Road, Dana Spicer and Kentrol too.Pick a subcategory such as engine, brake or steering parts, open a product page for the part number and details, then compare the listings on this page.

Be Cool two-core aluminum replacement radiator

When a Jeep or older 4x4 breaks, the fix is usually one specific part with one specific number. This department collects those parts across 25 systems, from clutch and cooling to mirrors, transfer cases and windshield hardware, so you can get a stock rig running again without guessing.

Each listing is tied to a factory or supplier part number, and most come from Crown Automotive and Omix-Ada. Pick the system first, then match the details that split one year from the next: engine size, transmission and transfer case model, axle model and the side of the vehicle. Read what each listing includes, because some parts ship without keys, bulbs or hardware.

581Parts listed
25Systems covered
23Brands
321Crown Automotive parts
197Omix-Ada parts
2.4L–4.2LJeep engines in listings

Shop replacement parts by system

More part types (6)

Popular replacement parts

Part identification reference

Most fitment mistakes come from one missed detail. These are the places to find it and examples of how the listings here split by drivetrain and engine.

Where to find the codes

Model year10th character of the VIN
Engine8th character of the VIN
Axle modelAxle tag or housing casting number
Transfer caseID tag on the case (NP231, NP242)
Manual transmissionModel on the case (AX5, AX15)
Side of vehicleLeft is the US driver side

Engine splits in the listings

  • Main bearing cap bolt: shared by the 2.5L four and 4.0L and 4.2L sixes
  • Air intake duct: 4.2L six with power brakes
  • Fuel module: Liberty KJ 2.4L (2005) and 3.7L (2005-07)
  • Muffler assembly: 304 V8, tailpipe included
  • Stainless fuel line: six-cylinder, tank to pump

Drivetrain parts by unit

Dana 35 rear axleDifferential carrier, axle bearing and cup
Dana 44 front axleFront axle spindle
NP231 / NP242 transfer caseInput gear outer bearing
Dana 18, 20, 300 transfer caseNeedle bearing shaft kit
AX4 / AX5 transmissionInput shaft
AX15 transmissionRear cluster shaft bearing with snap ring

Read what's included

Ignition cylinderKey sold separately
Tail lamp assemblyLens and housing only
Side mirrorsSold by side; check electric or manual
Sway bar linkFits either side, poly bushings
Fuel moduleReuses existing hardware
Side guard setCutting or drilling required

Factory part numbers can be superseded over the years. If yours does not match exactly, confirm the cross-reference on the product page before ordering.

All Replacement Parts 578 parts

Showing 1–12 of 578 resultsSorted by popularity

What this category covers

Replacement parts are the components that restore a vehicle to working order, as opposed to upgrades that change how it performs. This branch of the catalog spans nearly every system on an older Jeep or similar 4x4: engine gaskets and seals, cooling hoses and radiators, brake hardware, axle and differential parts, steering components, electrical and lighting parts, mirrors, doors, tailgates and frame repair pieces.

The sample listings show how wide the range is, from a thermostat gasket and a fuel tank strap to a Dana 35 differential carrier and a TJ torque box repair piece. Most are sold by part number, so the subcategories are the fastest way to narrow things down.

Finding the right part

Start with the system that is failing, then identify the exact vehicle: model year, body style, engine size, transmission and axle type. Many parts differ between a 2.5L four-cylinder and a 4.0L six, or between a Dana 30 and a Dana 44, even within the same model year.

Useful details to gather before you shop:

  • Engine displacement and cylinder count, often stamped on the valve cover or listed on the emissions label
  • Transmission and transfer case model
  • Front and rear axle model, found on the axle tag or by measuring the differential cover
  • Left or right side, driver or passenger, and whether the part is sold individually

OEM-style versus upgraded parts

Many listings are direct replacements built to match the original part, which is the right choice for a stock rebuild or a restoration. Where a part has a known weak point, such as a worn track bar or a rusted torque box, a heavier-duty or reinforced version may be worth considering. Compare material, included hardware and what the listing says about fitment.

Some items, like the torque box repair, ship as raw steel and require welding and paint, so read the full description before deciding.

Installation and safety notes

Replace related wear items together when it makes sense: a water pump with the thermostat and hoses, or both tie rod ends on an axle. Steering, brake, suspension and axle parts are safety-critical. Follow the factory service manual for torque specifications, use new cotter pins and fasteners where specified, and have the work done by a qualified shop if you are not equipped to do it. Have the alignment checked after steering or suspension work.

Inspection habits and common mistakes

Many replacement jobs go wrong because of a small oversight rather than a bad part. Before removing anything, take photos and lay the old part beside the new one to compare mounting holes, connector shapes, hose diameters and overall length. A mismatch found on the bench costs minutes, while one found halfway through an installation can leave a vehicle immobile.

  • Replace fasteners, clips and gaskets that are corroded, stretched or single-use rather than reusing them
  • Penetrating oil applied the day before makes rusted bolts on older frames and exhaust studs far less likely to snap
  • Keep a list of part numbers you have installed, with the date and mileage, so future repairs are easier to match
  • Fluids drained during a repair, such as coolant or gear oil, should be replaced with the type the manufacturer specifies
  • After any brake, steering or suspension repair, test the vehicle at low speed in a safe area before driving normally

Older Jeep platforms often changed small details during a production run, so a part that fits an early model of a given year may not fit a late one. Treat the year range in any listing as a starting point and confirm with your vehicle's identification number or the factory parts diagram.

Popular Replacement Parts brands

Replacement Parts FAQ

How do I know a replacement part fits my vehicle?

Match the part number to your factory number when you have it, and confirm year, model, engine, transmission and axle on the product page. When in doubt, check the manufacturer's specifications or the factory parts diagram before you choose a part.

What does a cross-referenced OEM part number mean?

Many aftermarket parts are listed with the original equipment number, such as a Mopar-style part number. It lets you compare a listing to your original part, but you should still verify application notes for engine size and model year.

Should I replace parts in pairs?

For wear items on the same axle, such as tie rod ends, brake hardware or mirror arms, replacing both sides keeps handling and appearance consistent. For one-off failures like a sending unit or gasket, a single part is usually enough.

Can I install these parts myself?

Many gaskets, hoses, mirrors and trim pieces are manageable with hand tools. Brake, steering, axle and suspension parts affect safety, so use proper torque specs and consider professional installation if you lack the tools or experience.