Overview
The G2 Toyota 8 inch front reverse 4.88 ratio ring and pinion, part number 2-2043-488R, is a 4.88 gear set for the front of Toyota 8 inch axles. It is made for Toyota 7.5 inch and 8 inch axle types and works with all ratio carriers.
The gears are made from computer heat treated 8620 steel and are double shot peened and double lapped. They are built for oversized tires and high-performance engines and manufactured to O.E. specifications, with a 10 year warranty.
Key features
- 4.88 gear ratio
- Front reverse design
- Works with all ratio carriers
- Computer heat treated 8620 steel
- Double shot peened and double lapped
- 10 year warranty
Front gear swap considerations
A front reverse set changes how the front axle turns, so the swap is more than a gear change. Look at the front differential, the carrier and the pinion bearings together, since the set will load those parts differently than the original gears did. Clean all surfaces and plan for a proper setup from the start.
Oversized tires and high-performance engines put more stress on the front gear set, so the break-in matters. Keep speeds moderate for the first stretch, check the gear oil level after the first few outings, and listen for changes in noise when the front axle is under load. Early notice of wear makes repairs easier.
- Use the correct gear oil for the front differential
- Check the front driveshaft and joints for wear
- Replace seals and bearings that are already worn
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2043-488R |
| UPC | 631410094381 |
| Gear ratio | 4.88 |
| Axle location | Front |
| Axle types | Toyota 7.5 in and Toyota 8 in |
| Carrier requirement | All ratio carriers |
| Material | Computer heat treated 8620 steel |
| Finish | Double shot peened, double lapped |
| Warranty | 10 years |
Vehicle fitment
This set is for the front of the Toyota 7.5 inch and 8 inch axles and is not tied to a model year. Confirm the axle type before ordering.
Installation notes
This is a gear set that needs professional setup and a break-in period once it is installed.
What’s included
One front reverse ring and pinion gear set.














