G2 Axle and Gear
Showing 817–864 of 1013 resultsSorted by popularity
-
Differential Covers
G2 Ford 10.25 Inch/10.5 Inch Ball Milled Aluminum Cover – 40-2046MB
- Rear Ford 10.25 and 10.5 inch Sterling axles
- Cast lightweight aluminum with ball milled ribs
- Heat treated and shot peened body with a machined seal surface
- Extra oil capacity with filler, fill level and drain plugs
SKU: G/240-2046MB -
-
-
-
Wheel Bearings
G2 77-86 Jeep CJ Front Wheel Bearing Kit – 30-8004
- Front wheel bearing kit 30-8004 from G2 Axle and Gear, for one side of the front axle
- Built for 77-86 Jeep CJ with a Dana 30 standard front axle
- Includes Timken inner and outer wheel bearings and races, plus a wheel bearing seal
- No separate fitment list is provided; confirm year, model and trim before ordering
SKU: G/230-8004 -
-
-
Dana 44 Disc Brake Conversions
G2 Emergency Brake Cable – 95-2049PC8
- G2 passenger side emergency brake cable 95-2049PC8, 44 inches long
- Made for the G2 Disc Brake Kit as the final piece of that kit
- Durable construction with moderate bolt on installation
- No vehicle years or models named; direct fit stated
SKU: G/295-2049PC8 -
-
Ring and Pinion Installation Kits
G2 Toyota Tacoma 8.4 InchRear Minor Ring and Pinion Installation Kit – 25-2056
Ring and Pinion Installation KitsG2 Toyota Tacoma 8.4 InchRear Minor Ring and Pinion Installation Kit – 25-2056
- Minor installation kit for the Toyota Tacoma 8.4-inch axle
- Includes pinion nut, pinion seal, crush sleeve and shims
- Includes ring gear bolts, thread locking compound, gear marking compound and silicone sealer
- Gears and bearings not included
SKU: G/225-2056 -
Ring and Pinion Installation Kits
G2 Dana 44 Minor Ring and Pinion Installation Kit – 25-2033
- Minor ring and pinion installation kit for Dana 44 axles, part number 25-2033
- Includes pinion nut, pinion seal, crush sleeve, shims and ring gear bolts
- For use when the existing bearings stay in place
- Built for Dana 44 front and rear axles; check ring gear size before ordering
SKU: G/225-2033 -
-
Replacement Axle Shafts
G2 Dana 35 Replacement Axle Shaft – 95-2049-002
- Dana 35 rear replacement axle shaft, 27 spline, 29.04 in overall length
- 5 on 4.5 in bolt circle, 2.840 in pilot, 1/2 in press-fit studs
- For 1990 and newer Jeep Cherokee (XJ) and Wrangler (YJ); wheel studs not included
SKU: G/295-2049-002 -
-
-
Live Axle Spindles
G2 GM 8.5 Inch 10 Bolt Front Axle Spindle – 99-2021-1
- GM 8.5 inch 10 bolt front axle spindle, part number 99-2021-1
- Precision machined from forged steel with a 6 bolt mounting pattern
- Covers 1977-1991 GM K5 and Suburban trucks, and 1977-1987 GM 1/2 and 3/4 ton trucks.
- Confirm year, model and trim before ordering.
SKU: G/299-2021-1 -
-
Differential Gear Kit
G2 Ford 8.8 Inch Internal Kit – 20-2013-31
- G2 Axle and Gear Ford 8.8 inch internal gear kit for open differentials
- 31 spline, with the listed spline note 87 and up
- Includes side gears, spider gears, thrust washers, a cross shaft and a retaining pin
- Rear axle location; UPC 631410093247
SKU: G/220-2013-31 -
-
Transfer Case Overhaul Kit
G2 NP242 With 6010 Input Bearing Transfer Case Rebuild Kit – 37-242BB
- G2 Axle and Gear NP242 transfer case rebuild kit with 6010 input bearing, part 37-242BB
- Includes bearings, seals, bushings and gaskets
- Chain not included
- No vehicle named on the product; fitment not stated
SKU: G/237-242BB -
-
Ring and Pinion Installation Kits
G2 Dana 44 JK 08 Up Rear Minor Ring and Pinion Installation Kit – 25-2053
Ring and Pinion Installation KitsG2 Dana 44 JK 08 Up Rear Minor Ring and Pinion Installation Kit – 25-2053
- Minor ring and pinion installation kit for a 2008-and-newer JK rear Dana 44, part number 25-2053
- Includes pinion nut, pinion seal, crush sleeve, shims and ring gear bolts
- Keeps the existing bearings: no bearing change needed
- Compound and sealer included: thread locking, gear marking and silicone
SKU: G/225-2053 -
-
-
Dana 44 Axle Shafts
G2 Dana 44 Chromalloy Inner Axle Shaft – 97-2033-006
- Passenger side front inner shaft, 30 splines
- Overall length 33.91 inches
- Fits 1978–1979 Ford Bronco, front axle, passenger side
- Accepts a 5-760X U-joint, machined for full circle clips
- Forged alloy steel, heat treated
SKU: G/297-2033-006 -
-
Dana 44 Axle Shafts
G2 Dana 44 Chromalloy Inner Axle Shaft – 97-2033-005
- Driver side front inner shaft, 30 splines
- Overall length 18.91 inches
- Fits 1978–1979 Ford Bronco in the front axle position, and 1968–1969 Ford F-150 trucks
- Accepts a 5-760X U-joint, machined for full circle clips
- Forged high-grade alloy steel, heat treated
SKU: G/297-2033-005 -
Parking Brake Cable
G2 Emergency Brake Cable – 95-2049PC3
- G2 passenger side emergency brake cable 95-2049PC3, 69.75 inches long
- Two cables required for each Wrangler
- Made for the G2 Disc Brake Kit, with moderate bolt on installation
- No vehicle years or models named; check fitment before ordering
SKU: G/295-2049PC3 -
Ring and Pinion Installation Kits
G2 Ford 9.75 Inch Minor Ring and Pinion Installation Kit – 25-2012
Ring and Pinion Installation KitsG2 Ford 9.75 Inch Minor Ring and Pinion Installation Kit – 25-2012
- Minor installation kit for the Ford 9.75-inch axle
- Includes pinion nut, pinion seal, crush sleeve and shims
- Includes ring gear bolts, thread locking compound, gear marking compound and silicone sealer
- Gears and bearings not included
SKU: G/225-2012 -
Differential Gear Kit
G2 GM 7.5 Inch Internal Kit – 20-2015-28
- G2 Axle and Gear GM 7.5 inch internal gear kit for open differentials
- 28 spline replacement gears with side gears, spider gears, thrust washers and cross shaft
- Made for the GM 10 Bolt 7.5 Inches rear axle type
- No vehicle years, makes or models listed; UPC 631410093261
SKU: G/220-2015-28 -
-
-
-
-
-
-
-
-
-
-
Dana 44 Axle Shafts
G2 Dana 44 Replacement Axle Shaft – 95-2033-1-302
- Passenger side rear axle shaft for 1997–2006 Jeep Wrangler TJ with the Dana 44 option
- 30 splines, overall length 29.75 inches
- Dual bolt pattern: 5 on 4.5 inch and 5 on 5.5 inch
- Tapped for screw-in wheel studs
- Wheel studs not included
SKU: G/295-2033-1-302 -
-
Ring and Pinion Installation Kits
G2 Dana 35 Minor Ring and Pinion Installation Kit – 25-2049
- Minor installation kit for the Dana 35 axle
- Includes pinion nut, pinion seal, crush sleeve and shims
- Includes ring gear bolts, thread locking compound, gear marking compound and silicone sealer
- Gears and bearings not included
SKU: G/225-2049 -
-















