Overview
The G2 Axle and Gear 2-2028-410 is a 4.10 ratio ring and pinion for the Chrysler 9.25 inch rear axle. It fits the rear location and works with all ratio carriers.
G2 says its gear sets are engineered for oversized tires and high performance engines. These 4.10 gears use computer heat treated 8620 steel with double shot peened and double lapped surfaces.
Key features
- 4.10 ratio rear ring and pinion
- Chrysler 9.25 inch rear axle
- Works with all ratio carriers
- Computer heat treated 8620 steel
- Double shot peened surfaces
- Double lapped gear set
- Manufactured to O.E. specifications
- 10 year warranty from G2
Pairing gears with the carrier
Ring gear and pinion are a matched pair, and the ratio is only one part of how the final drive performs. A 4.10 set gives strong pulling force at low speed, which suits steep grades, heavy loads and larger tires. Highway cruising runs at higher engine speed, so the trade-off is a busier drive on long stretches. Gearing is one of the biggest changes to how a 4×4 feels, so it is worth thinking about the tires and terrain you use most.
Because the new gears are cut to a specific setup, the carrier bearings, pinion bearing and pinion seal should be inspected at the same time. Tooth contact is set with shims, and a poor setup can cause early wear even with good parts. Keep records of shim thickness and backlash so future service is simpler.
- Check carrier bearing condition
- Replace the pinion seal during the swap
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2028-410 |
| UPC | 631410093780 |
| Gear ratio | 4.10 |
| Axle location | Rear |
| Axle type | Chrysler 9.25 inch |
| Popular axle manufacturer | Chrysler |
| Carrier requirement | All ratio carriers |
| Material | Computer heat treated 8620 steel |
Vehicle fitment
It is made for the Chrysler 9.25 inch axle at a 4.10 ratio. Confirm the housing size before ordering.
Only the Chrysler 9.25 inch is named for this 4.10 set. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Pinion depth, backlash and bearing preload on the 4.10 Chrysler gears should be set by a driveline shop, followed by a break-in period.
What’s included
A matched ring and pinion for the Chrysler 9.25 inch rear axle.
















