Overview
The G2 Axle and Gear 2-2021-373 is a 3.73 ratio ring and pinion for GM 10 bolt 8.5 inch axles. It fits front and rear locations on the 8.5 inch and 8.6 inch housings and is made for use with 2.73 and up carriers.
A 3.73 ratio is numerically lower than the 4.10 options in the same family, so it gives less torque multiplication at the wheels. The 8.6 inch version works with the 35-2022 Master Kit, and the gears are built from computer heat treated 8620 steel.
Key features
- 3.73 ratio GM 10 bolt ring and pinion
- Front and rear locations listed
- For use with 2.73 and up carriers
- Computer heat treated 8620 steel
- Double shot peened surfaces
- Double lapped gear set
- Manufactured to O.E. specifications
- 10 year warranty from G2
Choosing between 3.73 and 4.10
Gear ratio sets how much the engine speed is multiplied at the wheels, so the choice between a higher and a lower ratio changes how the vehicle feels off the line and at highway speed. A lower ratio like this 3.73 set trades some low-speed pull for quieter cruising and better fuel use, which suits mostly paved driving.
Anyone weighing this ratio against a numerically higher set should think about tire size, typical loads and how often the vehicle is driven off road. Changing ratios also means checking the carrier, the speedometer calibration and the axle lubricant at the same time.
- Consider tire size before choosing a ratio
- Check speedometer calibration after a gear change
- Keep the same lubricant type through the change
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2021-373 |
| UPC | 631410093537 |
| Gear ratio | 3.73 |
| Axle location | Front and rear |
| Axle type | GM 10 bolt 8.5 inch and 8.6 inch |
| Popular axle manufacturer | GM |
| Carrier requirement | 2.73 and up |
| Material | Computer heat treated 8620 steel |
Vehicle fitment
This 3.73 set is made for GM 10 bolt 8.5 inch and 8.6 inch axles. Confirm the housing size and carrier before ordering.
Only the GM 10 bolt 8.5 inch and 8.6 inch is named for this 3.73 set. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Set pinion depth, backlash and bearing preload on the 3.73 gears with a driveline shop, then follow a break-in procedure before the axle sees full load.
What’s included
A matched ring and pinion for the 3.73 ratio.
Not included: the 35-2022 Master Kit, which the 8.6 inch version works with.
















