Overview
The G2 2-2024-456 is a 4.56 ratio rear ring and pinion for the 11.5 inch American Axle Manufacturing (AAM) rear axle. It fits the Chrysler 11.5 inch housing, also covers the GM 14 bolt 11.5 inch AAM type, and works with all ratio carriers.
G2 describes its ring and pinion sets as built for oversized tires and high performance engines. The gears are made from computer heat treated 8620 steel with double shot peened and double lapped surfaces, to O.E. specifications.
Key features
- 4.56 ratio rear ring and pinion
- Fits the Chrysler 11.5 inch housing.
- Works with all ratio carriers
- Computer heat treated 8620 steel
- Double shot peened surfaces
- Double lapped gear set
- Manufactured to O.E. specifications
- 10 year warranty from G2
Fitting an 11.5 inch AAM
The 11.5 inch AAM housing is a widely used rear axle, and ring and pinion swaps are a common way to change gearing for bigger tires or a different towing setup. A 4.56 ratio is a moderate change that keeps highway speeds reasonable while still helping with low-speed pull.
Because housings vary, check the housing casting and bolt pattern before buying new gears. Keep the old ring gear’s contact pattern in mind as a reference, and take photos of shim and pinion depth settings before removal so the setup can be compared later. Replacing carrier bearings and axle seals while the cover is off is a sensible step.
Careful records and a clean cover surface make reassembly smoother and help the new gears settle in evenly.
- Photograph shim and pinion settings before removal
- Replace the cover gasket during reassembly
- Check axle seals and carrier bearings for play
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2024-456 |
| UPC | 631410093643 |
| Gear ratio | 4.56 |
| Axle location | Rear |
| Axle type | Chrysler 11.5 inch AAM; GM 14 bolt 11.5 inch (AAM) |
| Popular axle manufacturer | American Axle Manufacturing |
| Carrier requirement | All ratio carriers |
| Material | Computer heat treated 8620 steel |
Vehicle fitment
The set covers the Chrysler 11.5 inch AAM and the GM 14 bolt 11.5 inch AAM housings at a 4.56 ratio. Confirm the housing before ordering.
Only the Chrysler 11.5 inch AAM; GM 14 bolt 11.5 inch (AAM) is named for this 4.56 set. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Set pinion depth, backlash and bearing preload on the 11.5 inch AAM gears with a driveline shop, then complete a break-in period before heavy loads.
What’s included
A matched ring and pinion for the 11.5 inch AAM rear axle.















