Overview
The G2 Dana 80 Ball Milled Aluminum Cover (part 40-2080MB) is a black cast aluminum rear differential cover for Dana 80 axles, with extra oil capacity.
G2 aims the cover at two jobs: guarding the ring and pinion, and cooling the gear oil so the bearings last longer. The cast aluminum is heat treated and shot peened to help it handle a direct impact. Ball milled ribs add rigidity, and the machined seal face is intended to make installation leak-free.
Dana 80 axles are heavy-duty housings, so a cover that protects the gears and holds extra oil is a sensible upgrade on trucks that tow or run large tires.
Key features
- Cast lightweight aluminum body for heat dissipation
- Ball milled reinforcing ribs
- Heat treated and shot peened
- Machined seal surface
- Convenient filler plug, fill level plug and drain plug
- Dipstick for simple, easy maintenance
- Black powder coat finish
Cover upkeep and oil checks
A differential cover does its best work when the oil level stays right. Check the level on a level surface using the dipstick and fill plug, and top up only when the oil is cool enough to handle safely. Consistent checks catch small leaks early, before the gears lose lubrication.
The seal face matters as much as the cover itself. Clean the mating surface completely before installing, look for scratches or old gasket residue, and tighten the fasteners evenly. Any seepage around the seal should be fixed promptly, since low oil is one of the quicker ways to damage gears. Clean oil also helps the gears run cooler.
- Inspect the fill and drain plugs for leaks
- Keep the dipstick clean for accurate readings
- Look for dents or cracks after rough trail use
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 40-2080MB |
| UPC | 631410113099 |
| Material | Cast lightweight aluminum |
| Finish | Black powder coat |
| Axle location | Rear |
| Axle type | Dana 80 |
| Oil capacity | Extra |
| Service plugs | Filler, fill level and drain |
| Dipstick | Included |
Vehicle fitment
The axle type decides fit, and this cover is made for Dana 80 rear axles.
Measure or identify your axle before ordering to confirm it is a Dana 80 rear.
What’s included
A black aluminum rear cover with filler, fill level and drain plugs and a dipstick.
Not included: Gear oil.
















