Overview
The G2 2-2096-456 is a 4.56 ratio ring and pinion for the GM 9.25 inch IFS front axle. It fits the front location and works with all ratio carriers, so the carrier ratio does not limit the choice.
G2 says its performance sets are built for oversized tires and high performance engines. This IFS version is made from computer heat treated 8620 steel with double shot peened and double lapped surfaces.
Key features
- 4.56 ratio front ring and pinion
- GM 9.25 inch IFS axle
- Works with all ratio carriers
- Computer heat treated 8620 steel
- Double shot peened surfaces
- Double lapped gear set
- Manufactured to O.E. specifications
- 10 year warranty from G2
Front IFS gear mesh
Independent front suspension axles put the ring gear inside a carrier that moves with the suspension. A 4.56 ratio is a common choice for IFS trucks that run larger tires, because it gives the front driveline a little more leverage at low speeds.
Setup on IFS is less forgiving than on a solid axle. Shim stacks, pinion depth and bearing preload all shape the contact pattern, so record the existing settings before removing the carrier. Check the CV joints, axle shafts and differential fluid while the front end is open.
Taking time over the setup pays off in quieter running and more even wear over the life of the gears.
- Record the existing shim stack before disassembly
- Inspect CV boots and axle shafts
- Check differential fluid after the first drive
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2096-456 |
| UPC | 631410094824 |
| Gear ratio | 4.56 |
| Axle location | Front |
| Axle type | GM 9.25 inch IFS |
| Popular axle manufacturer | GM |
| Carrier requirement | All ratio carriers |
| Material | Computer heat treated 8620 steel |
Vehicle fitment
The set covers the GM 9.25 inch IFS at a 4.56 ratio. Confirm the axle type before ordering.
Only the GM 9.25 inch IFS is named for this 4.56 set. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
On an IFS front axle, a driveline shop should set pinion depth, backlash and bearing preload on the 4.56 gears, then run a break-in period.
What’s included
A matched ring and pinion for the GM 9.25 inch IFS front axle.
















