Overview
The G2 Axle and Gear 35-2024 is a master ring and pinion installation kit for the Chrysler 11.5 Inches AAM / GM 14 Bolt 11.5 Inches (AAM) rear axle.
For the 11.5 inch rear axle, G2’s 35-2024 supplies the parts that a gear swap consumes. That means Timken pinion bearings with races, carrier bearings with races, both shim packs, crush sleeve, nut, seal, ring gear bolts, and the sealing and marking compounds, all matched to the AAM-built axle.
The kit is sized to the axle, which is the practical guide for this widely shared AAM design. The Timken pinion and carrier bearings with races, shims, crush sleeve, seal, nut and ring gear bolts are all sized for the 11.5 inch axle. Thread locker, marking compound and silicone sealer are included.
Key features
- Master installation kit for the Chrysler 11.5 Inches AAM / GM 14 Bolt 11.5 Inches (AAM) axle (rear)
- Includes pinion Nut
- Includes pinion Seal
- Includes Timken Outer Pinion Bearing and Race
- Includes crush Sleeve
- Includes Timken Inner Pinion Bearing and Race
- Includes pinion Shims
- Includes carrier Shims
- Includes carrier Bearings and Races
- Includes ring Gear Bolts
Setting pinion depth and backlash
Pinion depth is the first thing to get right in an AAM 11.5 inch gear swap. The shims behind the pinion bearing set where the pinion sits relative to the ring gear, and a dial indicator is the usual way to measure backlash. Work in small shim changes, because a small move in depth can shift the contact pattern noticeably.
Carrier bearing preload and ring gear backlash come next. Tighten the carrier caps to the preload you want, then check backlash at several points around the ring gear. Read the tooth pattern with the marking compound before the cover goes back on, and apply silicone sealer only where the job calls for it. Fresh gear oil goes in last.
- Measure pinion depth before setting carrier preload
- Check backlash at several ring gear positions
- Clean sealing faces before applying sealer
- Refill with fresh gear oil once the pattern is confirmed
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 35-2024 |
| UPC | 631410095722 |
| Kit type | Master kit with bearings |
| Axle location | Rear |
| Axle type | Chrysler 11.5 Inches AAM / GM 14 Bolt 11.5 Inches (AAM) |
| Axle manufacturer | American Axle Manufacturing |
Vehicle fitment
It fits 2003-2010 rear axles, identified as the Chrysler 11.5 inch AAM, also known as the GM 14 bolt 11.5 inch (AAM). Because the axle is shared by several brands, identify the housing by its size rather than the badge on the truck.
Confirm your vehicle’s axle type, spline count and year before ordering.
Installation notes
The AAM 11.5 inch axle is large, and its gear job benefits from a press and dial indicator. Set the pinion with the shims, then verify backlash and the contact pattern with the compound before refilling.
Before opening the Chrysler 11.5 Inches AAM / GM 14 Bolt 11.5 Inches (AAM) housing for the 35-2024 job, gather a dial indicator, a torque wrench and clean gear oil. Record the original gear pattern, because the 35-2024 shims are the tool for moving the new pattern toward it. Fit the new nut and seal. Sort shims by thickness.
What’s included
- Pinion Nut
- Pinion Seal
- Timken Outer Pinion Bearing and Race
- Crush Sleeve
- Timken Inner Pinion Bearing and Race
- Pinion Shims
- Carrier Shims
- Carrier Bearings and Races
- Ring Gear Bolts
- Thread Locking Compound
- Gear Marking Compound
- Silicone Sealer
Not included: ring and pinion gears; the 35-2024 supplies installation parts for the Chrysler 11.5 Inches AAM / GM 14 Bolt 11.5 Inches (AAM) axle only.













