Overview
The G2 2-2023-538X is a 5.38 ratio thick ring and pinion for the GM 14 bolt 10.5 inch rear axle. It works with carriers rated at 4.10 and down, so the carrier should be at or below a 4.10 ratio.
G2 builds its performance gear sets for oversized tires and high performance engines. This thick 5.38 version is made from computer heat treated 8620 steel with double shot peened and double lapped surfaces.
Key features
- Thick version 5.38 ring and pinion
- GM 14 bolt 10.5 inch rear axle
- For use with 4.10 and down carriers
- Computer heat treated 8620 steel
- Double shot peened surfaces
- Double lapped gear set
- Manufactured to O.E. specifications
- 10 year warranty from G2
Thick gears on a 10.5 inch
A thick ring and pinion adds material to the gear teeth, which helps when the rear axle sees heavy loads from big tires or hard off-road use. The 5.38 ratio is a low gear, so it suits slow crawling and steep grades better than highway cruising.
A 5.38 change means the rest of the rear axle carries more load per wheel revolution. Check the pinion bearings, the carrier and the axle seals while the cover is off, and look over the old gears for chipping or uneven contact. Quiet running after break-in is a good sign that the mesh is set correctly.
- Verify the carrier ratio before buying
- Inspect pinion and carrier bearings
- Recheck cover bolts after the first trail trip
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2023-538X |
| UPC | 631410093636 |
| Gear ratio | 5.38 |
| Axle location | Rear |
| Axle type | GM 14 bolt 10.5 inch |
| Popular axle manufacturer | GM |
| Carrier requirement | 4.10 and down |
| Version | Thick |
| Material | Computer heat treated 8620 steel |
Vehicle fitment
It is a 5.38 set for the GM 14 bolt 10.5 inch rear axle. Confirm the axle and carrier before ordering.
Only the GM 14 bolt 10.5 inch is named for this 5.38 set. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Pinion depth, backlash and bearing preload on the thick 5.38 gears should be set by a driveline shop, then a break-in period completed before the carrier is loaded.
What’s included
A matched thick ring and pinion for the GM 14 bolt 10.5 inch rear axle.
















