Overview
The G2 2-2049-488 is a 4.88 ratio ring and pinion for the Dana 35 rear axle. It works with 3.54 and up carriers, so the carrier has to be rated at or above that ratio.
G2 says its performance sets are engineered for oversized tires and high performance engines. This 4.88 Dana 35 set is made from computer heat treated 8620 steel with double shot peened and double lapped surfaces.
Key features
- 4.88 ratio rear ring and pinion
- Dana 35 rear axle
- For use with 3.54 and up carriers
- Computer heat treated 8620 steel
- Double shot peened surfaces
- Double lapped gear set
- Manufactured to O.E. specifications
- 10 year warranty from G2
Dana 35 rear gearing
The Dana 35 is a compact rear axle often found in lighter four-wheel-drive trucks and Jeeps, and ring gear swaps on it are a practical way to change ratio for different tires or trail use. A 4.88 ratio moves the gearing toward low-speed pull, which helps on steep climbs, but it also raises engine speed at highway pace.
Carrier condition matters as much as the gears. Check the carrier bearings, pinion bearings and crush sleeve when the carrier is opened, and replace worn parts while the axle is apart. Keep the housing sealed and check the fluid level after the first few drives.
- Check the carrier for bearing play
- Inspect the pinion seal during the swap
- Confirm fluid level after the first drives
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2049-488 |
| UPC | 631410094541 |
| Gear ratio | 4.88 |
| Axle location | Rear |
| Axle type | Dana 35 |
| Popular axle manufacturer | Dana |
| Carrier requirement | 3.54 and up |
| Material | Computer heat treated 8620 steel |
Vehicle fitment
The set covers the Dana 35 at a 4.88 ratio. Confirm the axle and carrier before ordering.
It is made for the Dana 35 only, and other Dana sizes are outside this set. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A driveline shop should set pinion depth, backlash and bearing preload on the Dana 35 gears, and the 4.88 set needs a break-in period before full use.
What’s included
A matched ring and pinion for the Dana 35 rear axle.






























