Overview
The G2 Dana 30 Standard 4.56 ratio ring and pinion gear set, part number 2-2032-456, is a 4.56 gear ratio set for Dana 30 Standard front axles, meant for use with 3.73 and up carriers. G2 Axle and Gear designed the set for oversized tires and high-output engines.
The set is made from computer heat treated 8620 steel. Double shot peening and double lapping are used for strength and a quieter run. It is made to O.E. specifications and carries a 10 year warranty.
Key features
- 4.56 gear ratio
- Computer heat treated 8620 steel
- Double shot peened and double lapped
- Manufactured to O.E. specifications.
- 10 year warranty
Gear ratio and tire size
A numerically higher ratio changes how the drivetrain works. The engine turns faster at any given road speed, which helps when the truck is pulling heavy loads or running larger tires. Gearing is a trade-off, though, so the right choice depends on tire diameter, load and how the truck is used most.
Matching the carrier matters as much as the ratio itself. Confirm the carrier is the type this set is made for before buying, and check that the pinion and ring gear pattern is set correctly after installation. Carrier bearings, pinion bearings and axle seals are often replaced during the same job, since the gears are already exposed.
- Check carrier type before ordering
- Replace worn carrier bearings during the job
- Recheck tire size after changing gears
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2032-456 |
| UPC | 631410093902 |
| Gear ratio | 4.56 |
| Axle type | Dana 30 Standard |
| Carrier requirement | 3.73 and up carrier |
| Material | Computer heat treated 8620 steel |
| Finish | Double shot peened, double lapped |
| Warranty | 10 years |
Vehicle fitment
Fitment is listed by axle, not by vehicle: this set is for the Dana 30 Standard axle. It is not tied to a specific year, make or model. Check the axle type and carrier before ordering.
Installation notes
Ring and pinion gear sets need a professional setup, including pattern and backlash checks, and a proper break-in period after installation.
What’s included
One ring and pinion gear set.
















