Overview
The G2 Dana 44 4.56 Thick Ratio Ring and Pinion, part number 2-2033-456X, is a 4.56-ratio gear set for Dana 44 front or rear axles. It is made for a 3.73 and down carrier.
The gears are made from computer heat-treated 8620 steel, shot peened and double lapped. A 10-year warranty is listed by G2.
Key features
- 4.56 gear ratio, branded thick ratio
- For use with a 3.73 and down carrier
- Front or rear Dana 44 axle location
- Heat-treated 8620 steel
Thick ratio and gear choice
A 4.56 ratio sits in the middle of common Dana 44 gearing, giving a balance of pulling power and highway comfort for many drivers. The term thick ratio refers to the name on this set, so compare the tooth count and ratio on the part number rather than relying on the label alone.
Front and rear Dana 44 positions can use the same ratio, but the carrier and axle housing must be matched to the gears. Tires and vehicle weight also affect how the ratio feels, so consider them alongside the gear choice. Heat-treated 8620 steel is a common gear material, and the gear surface still wears with time and load.
Replace carrier bearings, pinion bearings, and the pinion seal with the gears if they are worn, since old bearings can allow the new mesh to shift. After the break-in period, check for fine metal in the gear oil and listen for whine under load.
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2033-456X |
| UPC | 631410094022 |
| Axle type | Dana 44 |
| Axle location | Front or rear |
| Gear ratio | 4.56 |
| Carrier | For use with 3.73 and down |
| Warranty | 10 years. |
Vehicle fitment
This set fits Dana 44 front or rear axles and is not tied to one vehicle. Confirm the carrier rating and axle location before installing.
Installation notes
Plan on professional setup for the mesh and bearing preload, and expect a break-in period once the new gears are in.
















