Overview
The G2 Axle and Gear 2-2021-342 is a 3.42 ratio ring and pinion for GM 10 bolt 8.5 inch and 8.6 inch axles. It fits front and rear locations and is made for 2.73 and up carriers.
A 3.42 ratio is numerically lower than the 3.73 and 4.10 options in this family, so it gives less torque multiplication at the wheels. The 8.6 inch version works with the 35-2022 Master Kit, and the gears are made from computer heat treated 8620 steel.
Key features
- 3.42 ratio GM 10 bolt ring and pinion
- Front and rear locations listed
- For use with 2.73 and up carriers
- Computer heat treated 8620 steel
- Double shot peened surfaces
- Double lapped gear set
- Manufactured to O.E. specifications
- 10 year warranty from G2
Ratio choice for daily driving
A 3.42 ratio is numerically lower than many GM 10 bolt options, so the engine turns more slowly at highway speed. That suits a vehicle that mostly sees road use, fuel economy goals and lighter tires. Drivers who add larger tires or tow often move to a numerically higher set to recover low-speed pull.
Gear choice also depends on the carrier. A 3.42 set works best with carriers rated at 2.73 and up, and the carrier bearings, pinion bearing and cover gasket are commonly serviced during the same job. Carrier condition should be checked before a new ring and pinion is mounted, because bent or worn parts shorten the life of fresh gears.
- Check the carrier rating against the ratio
- Inspect pinion and carrier bearings during the swap
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2021-342 |
| UPC | 631410093520 |
| Gear ratio | 3.42 |
| Axle location | Front and rear |
| Axle type | GM 10 bolt 8.5 inch and 8.6 inch |
| Popular axle manufacturer | GM |
| Carrier requirement | 2.73 and up |
| Material | Computer heat treated 8620 steel |
Vehicle fitment
It is made for GM 10 bolt 8.5 inch and 8.6 inch axles at a 3.42 ratio. Confirm the housing size and carrier before ordering.
The set is made for the 8.5 inch and 8.6 inch axles only. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Set pinion depth, backlash and bearing preload on the 3.42 gears with a driveline shop, then follow a break-in procedure before full load.
What’s included
A matched ring and pinion for the 3.42 ratio.
Not included: the 35-2022 Master Kit, which the 8.6 inch version works with.















