Overview
The G2 Dana 44 5.13 Thick Ratio Ring and Pinion, part number 2-2033-513X, is a 5.13-ratio gear set for Dana 44 front or rear axles. It is for use with a carrier rated 3.73 and down, the opposite of the 3.91-and-up sets in the same line.
The gears are made from computer heat-treated 8620 steel, double shot peened and double lapped. They come with a 10-year warranty from G2.
Key features
- 5.13 gear ratio in a thick ratio design
- For use with a 3.73 and down carrier
- Computer heat-treated 8620 steel
- Double shot peened and double lapped
Matching ratio to carrier
A carrier rating tells the gear set which ring gear geometry and bearing setup it was built to suit. A set rated for a lower carrier can need a different mounting arrangement, so the carrier rating and gear ratio should be confirmed together before the set is ordered. Mixing mismatched parts can make the gears run noisy or wear unevenly.
Lower-geared sets like a 5.13 are common where the vehicle is used at moderate speeds, but tire size and the engine’s power band both affect how the gearing feels. After installation, check the contact pattern and backlash, then recheck bolts and the carrier cover torque after the first few drives.
- Confirm the carrier rating first
- Check tire size before choosing a ratio
- Recheck torque after the first drives
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2033-513X |
| UPC | 631410094077 |
| Axle type | Dana 44 |
| Gear ratio | 5.13 |
| Carrier | For use with 3.73 and down |
| Gear material | Computer heat-treated 8620 steel |
| Warranty | 10 years, per G2 |
Vehicle fitment
Confirm the carrier is 3.73 or lower before ordering.
Installation notes
The set needs professional setup and a break-in period. Check the carrier against the 3.73-and-down rating before installing.
