Overview
The G2 AMC Model 20 3.54 Ratio Ring and Pinion, part 2-2025-354, is a front and rear gear set at 3.54 for the AMC Model 20 axle.
It is made for 3.07 and up carriers. The gears are computer heat treated 8620 steel, shot peened, double lapped and built to original equipment specifications.
Key features
- 3.54 gear ratio
- For use on 3.07 and up carriers
- Computer heat treated 8620 steel
- Double shot peened and double lapped
Carrier match and tooth contact
The carrier ratio and the gear ratio work together. A 3.54 set is intended for carriers at 3.07 and up, so the carrier needs to be checked before the gears go in. Mismatched carriers can lead to noise and early wear because the gears are not running in their intended range.
Tooth contact is the main check during setup. A pattern that is centered and even across the drive side is the goal. Pinion depth and backlash come first, then preload. Recheck tooth contact after the first few drives, because new gears settle in during break-in.
- Confirm the carrier ratio before purchase
- Inspect the carrier case for cracks before reuse
- Replace the pinion crush sleeve during setup
- Recheck pinion nut torque after break-in
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2025-354 |
| UPC | 631410093674 |
| Axle type | AMC 20 |
| Axle location | Front or rear |
| Gear ratio | 3.54 |
| Carrier | 3.07 and up |
| Warranty | 10 years |
Vehicle fitment
Universal fit is listed, but no vehicle is named. The set is for the AMC Model 20 at 3.54, so check the axle and carrier before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This set has to be matched to a 3.07 or higher carrier, and the tooth contact should be checked before the carrier is closed up.
What’s included
One ring and pinion set.
















