Overview
The G2 Ford 8.8 Inch 3.73 Ratio Ring and Pinion, part 2-2013-373, is a rear gear set at 3.73 for the Ford 8.8 inch axle.
The gears are computer heat treated 8620 steel, double shot peened and double lapped. The set works with all ratio carriers.
Key features
- 3.73 gear ratio
- Rear axle position
- Works with all ratio carriers
- Computer heat treated 8620 steel
Choosing the right setup
A 3.73 ratio is a common choice for a Ford 8.8 inch rear axle when a vehicle has larger tires or a heavier load. Lower ratios like this trade some low-speed pull for better highway cruising, so the right pick depends on how the truck is used. Tire diameter changes also shift the effective ratio, so check the math against your tires.
Gears of this type rely on proper bearing preload and pinion depth. After installation, a bench check of the setup helps catch problems before the axle sees trail use. Look for noise, heat, or oil leaks in the first miles and address them early.
- Inspect the pinion seal for leaks
- Keep fresh gear oil in the axle
- Watch for whine under load
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2013-373 |
| UPC | 631410093445 |
| Make | Ford |
| Axle size | 8.8 inch |
| Axle location | Rear |
| Gear ratio | 3.73 |
| Warranty | 10 years |
Vehicle fitment
Universal fit is listed, but no model or years are named for this Ford 8.8 inch rear axle. Confirm the application before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A 3.73 set is set up on the carrier with preload and pinion depth before break-in, so have it checked on the bench.
What’s included
One ring and pinion set.
















