Overview
This is a 5.13 ratio thick ring and pinion for the GM 14 bolt 10.5 inch rear axle. It works with 4.10 and down carriers, so the carrier should be set up for 4.10 or a numerically lower ratio.
G2 describes its performance gear sets as made for oversized tires and high performance engines. This thick 5.13 version uses computer heat treated 8620 steel with double shot peened and double lapped surfaces.
Key features
- Thick version 5.13 ring and pinion
- GM 14 bolt 10.5 inch rear axle
- For use with 4.10 and down carriers
- Computer heat treated 8620 steel
- Double shot peened surfaces
- Double lapped gear set
- Manufactured to O.E. specifications
- 10 year warranty from G2
Gearing and carrier match
A 5.13 ratio is one of the steeper gear choices for a GM 14 bolt 10.5 inch rear axle. It increases torque at the wheels for heavy towing, slow crawling, or large tires, and it raises engine speed on the highway. The carrier must match this ratio, so plan the full gear package before buying.
With a thick ring and pinion, bearing preload, pinion depth, and backlash are the main setup points. A driveline shop can check tooth contact on the bench. After the first trips, look for noise, heat, or leaks at the axle seals, since these signs show the setup needs another look.
- Plan the carrier and gear ratio together
- Check tooth contact on the bench
- Inspect axle seals after the first trips
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2023-513X |
| UPC | 631410093629 |
| Gear ratio | 5.13 |
| Axle location | Rear |
| Axle type | GM 14 bolt 10.5 inch |
| Popular axle manufacturer | GM |
| Carrier requirement | 4.10 and down |
| Version | Thick |
| Material | Computer heat treated 8620 steel |
Vehicle fitment
This 5.13 set fits the GM 14 bolt 10.5 inch at a 5.13 ratio. Confirm the axle and carrier before ordering.
Only the GM 14 bolt 10.5 inch is named for this 5.13 set. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
With a 5.13 ratio, pinion depth, backlash and bearing preload should be set by a driveline shop before the carrier is run in.
What’s included
A matched thick ring and pinion for the 5.13 ratio.














