Overview
The G2 GM 9.5 Inch 14 Bolt 4.56 Ratio Ring and Pinion, part 2-2010-456, is a rear gear set at 4.56 for a GM 14 bolt 9.5 inch axle.
The gears are computer heat treated from 8620 steel, double shot peened and double lapped. They work with all ratio carriers.
Key features
- 4.56 gear ratio
- Rear axle position
- Works with all ratio carriers
- Computer heat treated 8620 steel
Fourteen bolt rear service
The 14 bolt rear axle uses a carrier and axle shaft arrangement that must be checked as a whole before new gears go in. Pinion depth and preload are critical on this layout, and small errors can cause noise or early wear. Careful measurement and a clean carrier make the difference between a quiet rear end and a problem that returns.
Axle bearings, seals and axle shafts should be inspected while the carrier is out. Worn parts can allow fresh gears to shift, and oil leaks can contaminate new teeth. Taking the time to check these items keeps the new set in good condition for the long term.
- Check axle bearings and seals while the carrier is out
- Measure pinion depth and preload carefully
- Inspect axle shafts for wear before reassembly
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2010-456 |
| UPC | 631410093391 |
| Make | GM |
| Axle size | 9.5 inch 14 bolt |
| Axle location | Rear |
| Gear ratio | 4.56 |
| Warranty | 10 years |
Vehicle fitment
Universal fit is listed, but the set is for a GM 9.5 inch 14 bolt rear with no model or years given. Confirm the application before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A 14 bolt carrier needs the pinion depth and preload set precisely before the gears are run.
What’s included
One ring and pinion set.
















