Overview
This is a 4.10 ratio O.E.M. series ring and pinion for the GM 9.25 inch IFS front axle. It works with all ratio carriers, so the carrier does not limit this gear set.
The O.E.M. series in this 4.10 set is designed to run cooler and quieter than aftermarket gears. The gears are made to original equipment manufacturer specifications, the same design as the gears that came in the truck from the factory.
Key features
- O.E.M. series ring and pinion for the 9.25 inch IFS front axle
- 4.10 gear ratio
- Works with all ratio carriers
- Computer heat treated 8620 steel
- Double shot peened surfaces
- Double lapped gear set
- Manufactured to O.E. specifications
- 10 year warranty from G2
Working with an IFS front axle
An independent front suspension axle has a different layout from a solid front axle. The ring and pinion sits in a housing that moves with the suspension, so setup depends on the joints and bearings working together. A driveline shop with IFS experience is the right choice for the install.
O.E.M. series gears are often chosen for a factory-like feel on the road. Gears with a close match to the original design usually suit daily driving and light trail use. Keep the front differential oil fresh, inspect the axle seals after each season, and listen for whine or clunks when the axle is loaded.
- Check the IFS axle seals for leaks
- Replace the differential oil at the factory interval
- Inspect the CV axles when the front gears are replaced
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 1-2096-410 |
| UPC | 631410093124 |
| Gear ratio | 4.10 |
| Axle location | Front |
| Axle type | GM 9.25 inch IFS |
| Popular axle manufacturer | GM |
| Carrier requirement | All ratio carriers |
| Series | O.E.M. |
| Material | Computer heat treated 8620 steel |
Vehicle fitment
It is for the GM 9.25 inch IFS at a 4.10 ratio. Confirm the axle type before ordering.
Only the GM 9.25 inch IFS is named for this 4.10 set. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
On an IFS front axle, pinion depth, backlash and bearing preload need a driveline shop with ring and pinion experience. Break the 4.10 gears in as directed by the installer before heavy towing.
What’s included
A matched O.E.M. series ring and pinion for the 9.25 inch IFS front axle.
















