Overview
The G2 Axle and Gear 35-2021L is a master ring and pinion installation kit with bearings for the GM 8.5-inch big bearing (10 bolt) axle, for the rear axle position.
The 35-2021L includes the parts needed to install a ring and pinion, with pinion and carrier bearings along with the shims, nut, seal and compounds. Some of its parts are hard-to-find items that auto parts stores rarely stock. It is for use in 81-98 8.5-inch rear axles with big bearing 8.6-inch differential carrier only. Front axles need pinion seal part number NAT8460N, sold separately. The ring and pinion gear set is not included.
Key features
- Master kit with bearings for the GM 8.5-inch big bearing (10 bolt) axle
- Timken outer and inner pinion bearings and races
- Pinion shims and carrier shims
- Carrier bearings and races included
- Pinion nut, crush sleeve, pinion seal and ring gear bolts
- Thread locking compound, gear marking compound and silicone sealer
- For use in 81-98 8.5-inch rear axles with big bearing 8.6-inch differential carrier only
Big bearing carrier checks
Big bearing carriers add a layer of fit checking before the gear work begins. Measure the carrier bore and confirm the bearing seats are clean and undamaged, because a mismatch there will affect preload no matter how carefully the gears are set. Take time with the carrier before pressing in any bearing.
Front and rear setups can share a tool kit but not always the same seals, so keep the seal decision separate from the gear decision. Once the pinion is in place, rotate the assembly by hand and feel for drag or roughness, which often points to a preload or bearing issue that is simpler to fix now than after the axle is back in the truck.
- Clean all bearing seats before fitting new races
- Keep shim packs organized by side and position
- Mark the carrier caps so they return to their original location
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 35-2021L |
| UPC | 631410095678 |
| Product type | Master ring and pinion installation kit with bearings |
| Axle | GM 8.5-inch big bearing (10 bolt) |
| Axle location | Rear |
| Popular axle manufacturer | GM |
| Kit type | Master kit with bearings |
| Listing condition | For use in 81-98 8.5-inch rear axles with big bearing 8.6-inch differential carrier only |
| Listing condition | Front axles will require pinion seal part number NAT8460N, sold separately |
| Contents | Pinion nut, pinion seal, Timken outer pinion bearing and race, crush sleeve, Timken inner pinion bearing and race, pinion shims, carrier shims, carrier bearings and races, ring gear bolts, thread locking compound, gear marking compound, silicone sealer |
Vehicle fitment
The 35-2021L is identified by axle rather than by vehicle: it is made for the GM 8.5-inch big bearing (10 bolt) axle in the rear position. It is for 81-98 8.5-inch rear axles with big bearing 8.6-inch differential carrier only, and front axles need pinion seal NAT8460N, sold separately. Confirm fit for your vehicle’s year, model and trim before ordering.
Other axle designs and sizes fall outside this kit. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
A master kit such as the 35-2021L replaces the bearings along with the gear set. Its pinion shims, carrier shims, crush sleeve and gear marking compound set pinion depth, preload and tooth contact, so an installer with gear setup experience should handle it. Front axles need the separate pinion seal, NAT8460N.
What’s included
- Pinion nut
- Pinion seal
- Timken outer pinion bearing and race
- Crush sleeve
- Timken inner pinion bearing and race
- Pinion shims
- Carrier shims
- Carrier bearings and races
- Ring gear bolts
- Thread locking compound
- Gear marking compound
- Silicone sealer
Not included with the 35-2021L: ring and pinion gear set; pinion seal NAT8460N for front axles.












